2 layers104.9 × 75.2 mm
2 layers
Led spinner
follower/led-spinner-toy3Flashy LED toy designed with KiCad
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 45
- Pads
- 125
- Tracks, vias
- 401, 60
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 24 Dec 2013
- Updated
- 10 Nov 2014
Overview
Led spinner is an open-source printed circuit board by follower, from the follower/led-spinner-toy repository on GitHub. It is a 2-layer board with 43 parts on 45 nets, routed with 401 tracks and 60 vias.
It is built around the ATMEGA328-PU. Its parts include 17 resistors, 4 connectors, 3 capacitors, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdLED Spinner Toy
Flashy LED toy designed with KiCad
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | R | w_smd_resistors:r_0805 | R1, R2, R3, R4, R5, R6, R7, R8, R10, R11, R12, R13, R14, R15, R16, R17 +1 |
| 16 | LED | w_smd_leds:Led_0805 | LD1, LD2, LD3, LD4, LD5, LD6, LD7, LD8, LD9, LD10, LD11, LD12, LD13, LD14, LD15, LD16 |
| 3 | C | w_smd_cap:c_0805 | C1, C2, C3 |
| 1 | ATMEGA328 | w_smd_lqfp:lqfp32 | U1 |
| 1 | AVR-ISP-6 | w_pin_strip:pin_socket_3x2 | CON1_ICSP |
| 1 | BATTERY_CR2032 | battery-cr2032-retainer-keystone-3003:CR2032_HOLDER_KEYSTONE_3003 | BT1 |
| 1 | SERIAL | w_pin_strip:pin_socket_3 | J1-SERIAL |
| 1 | SPARE | w_pin_strip:pin_socket_2 | J2-SPARE |
| 1 | SW_PUSH | OMRON-PUSH-BUTTON-B3SN-3112P:OMRON-PUSH-BUTTON-B3SN-3112P | SW1 |
| 1 | TILT | w_pin_strip:pin_socket_2 | J3-TILT |
Questions
What parts does the Led spinner use?
43 parts, built around the ATMEGA328-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led spinner KiCad files?
From the follower/led-spinner-toy repository on GitHub, at the commit this page was made from: the board is pcb/led_spinner.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led spinner design in my own project?
Its repository states no licence, so its author keeps all rights: ask follower before reusing the design.
Similar boards
- 2 layers228 × 98 mm
- 2 layers94.6 × 46.1 mm
- 2 layers50 × 50 mm
- 2 layers284.7 × 94.2 mm
Lumberjack
peej/lumberjack-keyboard
5x12 ortholinear through-hole component keyboard PCB for standard 60% cases
165 parts403MIT - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers63.3 × 57.2 mm
- 2 layers285 × 117 mm
