2 layers
4 layers69 × 31 mm
Silver
Foalyy/silver-kicad18Kicad project for the Silver open-source, long-range camera remote control
- Size
- 69 × 31 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 82
- Pads
- 362
- Tracks, vias
- 1,044, 126
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Apr 2019
- Updated
- 19 Aug 2019
Overview
Silver is an open-source printed circuit board by Foalyy, from the Foalyy/silver-kicad repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 69 × 31 mm with 96 parts on 82 nets, routed with 1,044 tracks and 126 vias.
It is built around the TPS2112APW, TPS22917DBV and PRTR5V0U2X. Its parts include 28 resistors, 27 capacitors, 9 transistors, 8 connectors and 8 switches. It belongs with the SAM D and SAM boards of this library.
Main components
3
TPS2112APW
TSSOP-8-40℃~+85℃ 1 120mΩ 2.8V~5.5V 750mA Active High High Side Switch TSSOP-8 Power Distribution Switches ROHSTexas InstrumentsMonitors & Reset Circuits
TPS22917DBV
SOT-23-6-40℃~+125℃ 0V~5.5V 1 2A 80mΩ Active High Load Switch Output discharge function、Soft-start、Reverse current blocking SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution Switches
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdSilver
Silver is an open-source project aiming at making a long-range and fully-featured camera remote control.
See https://silica.io/tag/silver/ for a more detailed build log of the project.
This is the repository of the Kicad project with the schematic and layout of the board. See the main repository at https://github.com/Foalyy/silver-firmware.
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C3, C4, C5, C6, C7, C16, C17, C20, C22, C26, C27 |
| 11 | 22kR | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7, R8, R9, R13, R14, R15, R16, R17, R18, R27 |
| 8 | Push | silver:pushbutton | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 8 | Q_NMOS | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q5, Q6, Q7, Q8, Q9, Q10 |
| 7 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C8, C12, C13, C14, C21, C23 |
| 6 | 470R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R5, R10, R20, R23, R24 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C10, C15, C18, C19 |
| 4 | NM | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R21, R22, R25, R28 |
| 3 | 10KR | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R11, R12 |
| 3 | RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D5, D7 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C9, C11 |
| 2 | 39R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3 |
| 2 | jack_trrs_switch | silver:jack_2.5_trrs | P1, P2 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R26 |
| 1 | 2.2uF 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C25 |
| 1 | 22uH | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L1 |
| 1 | 390R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R19 |
| 1 | 4.7uF 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C24 |
| 1 | ATSAM4LSxB | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8 |
| 1 | Conn_01x02 | Connector_JST:JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_Horizontal | J1 |
| 1 | Conn_01x02 | silver:antenna_sma_ufl | J6 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4 |
| 1 | Conn_01x05 | Connector_JST:JST_SH_SM05B-SRSS-TB_1x05-1MP_P1.00mm_Horizontal | J3 |
| 1 | Conn_01x30 | silver:FPC_30 | J5 |
| 1 | Crystal_Small | silver:quartz_abs06 | Y1 |
| 1 | D | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | LoRa_RFM9x | RF_Module:HOPERF_RFM9XW_SMD | U4 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D3 |
| 1 | Q_PMOS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | TLV70233_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | TPS2112A | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U6 |
| 1 | TPS22917 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U7 |
| 1 | USB_B_Micro | silver:USB_Micro-B_Molex-105017-0001 | J2 |
| 1 | logo_silica | silver:silica_logo_5mm | U5 |
Similar boards
- 2 layers71.1 × 67.9 mm
- 2 layers20 × 46 mm
Ts13 dev kit
tropicsquare/tropic01-stm32u5-usb-devkit-hw
Contains design files for TROPIC01 usb devkit based on STM32U5
68 parts5BSD-3-Clause-Clear - 2 layers20 × 60 mm
Ts13 dev kit
tropicsquare/devboards
Repository collects hw resources for development boards which are available for the TROPIC01 chip
72 parts4 - 6 layers133 × 92 mm
Motherboard
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
264 parts4.3kMIT - 4 layers95 × 55.5 mm
EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
137 parts2kApache-2.0 - 4 layers66.9 × 87 mm
MeshtasticNode BQ25185
h0lad/SolarMeshtasticNode
This is a Meshtastic Solar Node PCB based on the Heltec HT-CT62 and the linear solar charge controller TI BQ25185.
49 parts40CERN-OHL-S-2.0 - 2 layers75 × 60 mm
DUTler V2
TheYoctoJester/dutler
A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.
54 parts23Apache-2.0
Questions
How big is the Silver PCB?
It measures 69 × 31 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Silver use?
96 parts, built around the TPS2112APW, TPS22917DBV and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Silver KiCad files?
From the Foalyy/silver-kicad repository on GitHub, at the commit this page was made from: the board is silver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Silver design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).