

NewBrain PSU
Newbury/Grundy NewBrain schematics
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 21
- Pads
- 57
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Jun 2020
- Updated
- 26 Jun 2020
Overview
NewBrain PSU is an open-source printed circuit board by flypie, from the flypie/NewBrain repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 20 parts on 21 nets.
It is built around the TIP31A, 100UF/35V and B40C7000A, with the BC327 and BZX85B15-TR among its other parts. Its parts include 6 diodes, 4 capacitors, 3 resistors, 3 transistors and 2 inductors. It belongs with the power and retro computing and games boards of this library.
Main components
5TIP31A
TO-220-31 NPN 1.2V 25 2W 300uA 3A 3MHz 5V 60V NPN Standalone TO-220-3 Bipolar (BJT) ROHSonsemiBipolar (BJT)100UF/35V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorisedB40C7000A
SIP-4-50℃~+150℃ 165A 1V@5A 5uA@80V 7A 80V Single-Phase Rectifier SIP-4 Bridge Rectifiers ROHSDIOTECBridge RectifiersBC327
TO-921 PNP 100MHz 45V 5V 625mW 630 700mV 800mA PNP TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)BZX85B15-TR
DO-41Zener DiodesVishay Intertechnology
README
README.mdNewBrain
Newbury/Grundy NewBrain schematics
Creating a KiCAD schematic for the NewBrain and hopefully progressing on to a buildable version with COP420 replaced.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.5uH | Inductor_THT:L_Axial_L5.0mm_D3.6mm_P10.00mm_Horizontal_Murata_BL01RN1A2A2 | L1, L2 |
| 2 | 1N4002 | Diode_THT:D_DO-15_P5.08mm_Vertical_AnodeUp | D4, D6 |
| 2 | TIP31A | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R3 |
| 1 | 1000uf/35v | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 100uf/35v | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 220E | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R5 |
| 1 | 4700uf 16V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 680 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R2 |
| 1 | B40/C700 | Diode_THT:Diode_Bridge_15.1x15.1x6.3mm_P10.9mm | D10 |
| 1 | BC327 | Package_TO_SOT_THT:TO-92_Inline | Q3 |
| 1 | BZX61C13 | Diode_THT:D_DO-15_P5.08mm_Vertical_AnodeUp | D1 |
| 1 | BZX85 8V2 | Diode_THT:D_DO-15_P5.08mm_Vertical_AnodeUp | D2 |
| 1 | BZX85B15 | Diode_THT:D_DO-15_P5.08mm_Vertical_AnodeUp | D3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | RIFA PZB4003/3 Netfilter 2x0.047uF - 0.1uF MP 250V | Capacitor_THT:CP_Axial_L18.0mm_D10.0mm_P25.00mm_Horizontal | C1 |
| 1 | Transformer_1P_2S_E | Transformer_THT:Transformer_CHK_EI30-2VA_2xSec | T1 |
More from flypie/NewBrain
3- 2 layers

- 2 layers

- 2 layers

Similar boards
- 2 layers130 × 100 mm

System-100-PS22-PS24
minisystem/System-100-PS22-PS24
Roland System 100 Module 101/102 power supply
43 parts2 - 4 layers42 × 42 mm

- 2 layers155 × 80 mm

- 2 layers44.2 × 32.6 mm

Wiring
esp-ebus/ebus-adapter-hardware
This repo conains KiCAD design of eBUS bus powered (without external supply) adapter to WiFi.
49 parts44 - 2 layers61 × 61 mm

- 2 layers34 × 19.4 mm

KNX BCU
ArduinoSmarthomeDe/pcb-knx-bcu
Small KNX bus coupling module to connect microcontrollers via the serial interface.
11 parts6 - 2 layers139.2 × 95.6 mm

IGBT DRIVER
EmadBahra/open-source-IGBT-gate-driver
This is a beta version and it's not tested yet, so use it at your own risk under GPL v3
240 parts5 - 2 layers100 × 80 mm

Questions
What parts does the NewBrain PSU use?
20 parts, built around the TIP31A, 100UF/35V, B40C7000A and BC327. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NewBrain PSU KiCad files?
From the flypie/NewBrain repository on GitHub, at the commit this page was made from: the board is NewBrain PSU/NewBrain PSU.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NewBrain PSU design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).