Skip to the content
2 layers130 × 100 mmSystem-100-PS22-PS24, the printed circuit board in 3D

Roland System 100 Module 101/102 power supply

Size
130 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
43
Nets
39
Pads
226
Tracks, vias
205, 0
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
13 Nov 2016
Updated
18 Dec 2023

Overview

System-100-PS22-PS24 is an open-source printed circuit board by minisystem, from the minisystem/System-100-PS22-PS24 repository on GitHub. It is a 2-layer board of 130 × 100 mm with 43 parts on 39 nets, routed with 205 tracks and 0 vias.

It is built around the LM723CN and TIP31A. Its parts include 10 diodes, 8 connectors, 7 resistors, 6 capacitors and 2 ICs. It belongs with the power boards of this library.

Main components

2

README

README.md

Roland System 100 Model 101/102 Power Supply Replacement

Replaces Roland part # PS22 (110V) or PS24 (220V). I had a Model 102 come in that was missing its power supply so I designed a replacement. It is a straight clone of the schematic from the Model 102 service manual. The BOM from the service manual can be used directly with the exception of the 2SD234 power transistors (replaced with TIP31A equivalent) and the diode bridges (replaced with individual 1N4003).

![orthoview](/System 100 PS22-PS24.png)

EDA files generated in KiCad 4.0.2. Schematic library here: https://github.com/minisystem/MyKicadLibraries/blob/master/MySynthParts.lib

KiCad GitHub libraries required as well. :/

0.156" MTA header: Molex part # 0009652088 trimmers: Bourns 3362P or equivalent

There are large copper pours top and bottom that were intended to be used as heatsinks, but they are almost certainly inadequate. Use a large external heat sink for each power transistor. The orignal heatsinks will work fine.

Mounting holes match original power supply.

Hardware design by Minisystem: jeff@minisystem.ca

LICENSE

cc-by-nc-sa https://creativecommons.org/licenses/by-nc-sa/4.0/

Parts

43
QtyValueFootprintReferences
81N4001MyModules:Diode-DO-41D101, D101-1, D102, D102-1, D103, D103-1, D104, D104-1
43.3KResistors_THT:Resistor_Horizontal_RM10mmR102, R103, R105, R106
4CONN_01X01MyModules:CONN_01P1, P2, P3, P4
4VAL**MyModules:HOLE-M3HOLE-M3, HOLE-M3, HOLE-M3, HOLE-M3
210/16MyModules:2MM-POL-CAPC105, C106
21KMyModules:Bourns_3362PVR101, VR102
21N4003MyModules:Diode-DO-41D105, D106
23.9Resistors_THT:Resistor_Horizontal_RM10mmR101, R104
2470/35MyModules:5MM-POL-CAPC101, C102
2470pCapacitors_THT:C_Disc_D6_P5C103, C104
2CONN_01X04Pin_Headers:Pin_Header_Straight_1x04P10, P13
2LM723CNHousings_DIP:DIP-14_W7.62mmU101, U102
2PS24: 0.5Aw_misc_comp:fuse_holder_CQ-2F101, F102
2TIP31AMyModules:TO-220-PCB-HEATSINKQ101, Q102
11KResistors_THT:Resistor_Horizontal_RM10mmR107
1CONN_01X06Pin_Headers:Pin_Header_Straight_2x03P11
1CONN_01X08w_conn_kk156:kk156_26-60-4080P5

Similar boards

  • 2 layers72.9 × 60.9 mmThe world of Kanishk, the printed circuit board in 3D

    The world of Kanishk

    kanishk-pal/The-world-of-Kanishk

    Art and Science of PCB Design

    27 parts
  • 2 layersNewBrain PSU, the printed circuit board in 3D

    NewBrain PSU

    flypie/NewBrain

    Newbury/Grundy NewBrain schematics

    20 parts5GPL-3.0
  • 2 layers52.2 × 52.2 mmBase, the printed circuit board in 3D

    Base

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    43 parts3kApache-2.0
  • 2 layers33 × 34 mmESP32-bat monitor latch, the printed circuit board in 3D

    ESP32-bat monitor latch

    pcbreflux/espressif

    all espressif stuff will committed here

    43 parts608GPL-3.0
  • 2 layers42.9 × 19 mmPoly kb 2.25U, the printed circuit board in 3D

    Poly kb 2.25U

    thpoll83/PolyKybd

    PolyKybd

    43 parts411CERN-OHL-W-2.0
  • 2 layers99.1 × 99.7 mmRC6502 Prototyping, the printed circuit board in 3D

    RC6502 Prototyping

    tebl/RC6502-Apple-1-Replica

    An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

    43 parts193GPL-3.0

Questions

How big is the System-100-PS22-PS24 PCB?

It measures 130 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the System-100-PS22-PS24 use?

43 parts, built around the LM723CN and TIP31A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the System-100-PS22-PS24 KiCad files?

From the minisystem/System-100-PS22-PS24 repository on GitHub, at the commit this page was made from: the board is System 100 PS22-PS24.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the System-100-PS22-PS24 design in my own project?

Its repository states no licence, so its author keeps all rights: ask minisystem before reusing the design.