

IGBT DRIVER
This is a beta version and it's not tested yet, so use it at your own risk under GPL v3
- Size
- 139.2 × 95.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 240
- Nets
- 100
- Pads
- 634
- Tracks, vias
- 1,261, 139
- Pours
- 24
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Nov 2021
- Updated
- 19 Apr 2022
Overview
IGBT DRIVER is an open-source printed circuit board by EmadBahra, from the EmadBahra/open-source-IGBT-gate-driver repository on GitHub. It is a 2-layer board of 139.2 × 95.6 mm with 240 parts on 100 nets, routed with 1,261 tracks and 139 vias.
It is built around the PS2801-1, 6N136S and BC817, with the BC807, 100UF/35V and BUK7880-55A-VB among its other parts. Its parts include 74 resistors, 68 capacitors, 44 diodes, 24 transistors and 11 ICs.
Main components
11PS2801-1
SOP-4-1.27mm-55℃~+100℃ 1 1.1V 120mW 2.5kV 300mV@10mA,2mA 3us 50mA 50mA 5us 600% 6V 80% 80V DC Phototransistor SOP-4-1.27mm Transistor, Photovoltaic Output Optoisolators ROHSRenesas ElectronicsTransistor, Photovoltaic Output Optoisolators6N136S
SMD-8P-40℃~+100℃ 1 1.45V 19% 1Mbit/s 1kV/us 20V 20mA 25mA 4.5V~18V 5V 5kV 800ns 800ns 8mA DC SMD-8P Logic Output Optoisolators ROHSAOTELogic Output OptoisolatorsBC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)BC807
SOT-23-65℃~+150℃ 1 PNP 100 100nA 345mW 45V 500mA 5V 700mV 80MHz PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)100UF/35V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorisedBUK7880-55A-VB
SOT-223-55℃~+150℃ 1 N-channel 100pF 120pF 2.5V 22nC@10V 4.5A 60V 76mΩ@10V、85mΩ@4.5V 810pF N-Channel SOT-223 MOSFETs ROHSVBsemi ElecMOSFETsBYV26E
SOD-57UncategorisedXCHBZX85C20
DO-41Zener DiodeonsemiUncategorisedD45VH10
TO-220-55℃~+150℃ 1 PNP 1.5V 100V 10uA 15A 35 50MHz 7V 83W PNP TO-220 Bipolar (BJT) ROHSonsemiBipolar (BJT)D44VH10
TO-220-55℃~+150℃ 1 NPN 10uA 15A 35 400mV 50MHz 7V 80V 83W NPN TO-220 Bipolar (BJT) ROHSonsemiBipolar (BJT)DB107S
DBS-55℃~+150℃ 1.1V@1A 10uA@1kV 1A 1kV 30A Single-Phase Rectifier DBS Bridge Rectifiers ROHSMDDBridge Rectifiers
README
README.mdPlease read Wiki it will be complete ASAP
This is a beta version and it's not tested yet, so use it at your own risk under GPL v3
Features
- Short pulse suppression
- Under voltage protection
- Fault soft turn off
- Active auto reset dynamic VCE clamp
- Separate Ron and Roff
- VCE monitoring
- High side-Low side shoot thought protection (not tested yet)
- Adjustable VCE protection
- Mosfet gate clamp
To add:
- dynamic short-circuit protection
- Designing its own converter
Parts
240| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27 +22 |
| 16 | 1k | Resistor_SMD:R_0805_2012Metric | R8, R9, R10, R13, R14, R21, R23, R30, R40, R41, R44, R45, R50, R54, R56, R63 |
| 14 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3, Q4, Q5, Q7, Q8, Q10, Q13, Q15, Q16, Q17, Q19, Q20, Q22 |
| 12 | 1n4148 | Diode_SMD:D_SMA | D12, D17, D18, D20, D21, D22, D31, D38, D39, D41, D42, D43 |
| 12 | SMCJ160CA-13-F | IGBT-DRIVER-emad:DIOM7959X250N | D3, D4, D6, D7, D8, D9, D11, D25, D26, D27, D28, D30 |
| 8 | 2.2k | Resistor_SMD:R_0805_2012Metric | R17, R18, R24, R25, R48, R49, R57, R58 |
| 8 | 40 | Resistor_SMD:R_2512_6332Metric | R33, R34, R35, R36, R66, R67, R68, R69 |
| 6 | 1.8k | Resistor_SMD:R_0805_2012Metric | R7, R27, R60, R72, R73, R74 |
| 6 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10, C12, C33, C34, C60, C61 |
| 6 | 1K | Resistor_SMD:R_0805_2012Metric | R28, R29, R31, R61, R62, R64 |
| 6 | 6k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R5, R6 |
| 6 | ps2801 | Package_SO:SOP-4_4.4x2.6mm_P1.27mm | U4, U5, U6, U8, U9, U10 |
| 4 | 100pF | Capacitor_SMD:C_0805_2012Metric | C35, C36, C62, C63 |
| 4 | 20K | Resistor_SMD:R_0805_2012Metric | R37, R38, R70, R71 |
| 4 | 220 | Resistor_SMD:R_0805_2012Metric | R19, R39, R51, R52 |
| 4 | BC807 | Package_TO_SOT_SMD:SOT-23 | Q2, Q9, Q14, Q21 |
| 4 | MountingHole | MountingHole:MountingHole_4.3x6.2mm_M4_Pad_Via | H1, H2, H3, H4 |
| 3 | LED_RED_0805 | kicadFP:LED_RED_0805 | D1, D34, D44 |
| 2 | 1.5k | Resistor_SMD:R_0805_2012Metric | R26, R59 |
| 2 | 10 | Resistor_SMD:R_0805_2012Metric | R32, R65 |
| 2 | 100nF 250v | Capacitor_THT:C_Rect_L13.0mm_W4.0mm_P10.00mm_FKS3_FKP3_MKS4 | C30, C57 |
| 2 | 100nf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C6 |
| 2 | 100uf/35v | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C40, C67 |
| 2 | 10uf/35v | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C7, C8 |
| 2 | 120 | Resistor_SMD:R_0805_2012Metric | R16, R47 |
| 2 | 1nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C39, C66 |
| 2 | 1nF | Capacitor_SMD:C_0805_2012Metric | C37, C64 |
| 2 | 20K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12, R43 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15, R46 |
| 2 | 22nF | Capacitor_SMD:C_0805_2012Metric | C38, C65 |
| 2 | 26v Zener | Diode_SMD:D_MELF | D14, D33 |
| 2 | 3.3K | Resistor_SMD:R_0805_2012Metric | R20, R53 |
| 2 | 56k | Resistor_SMD:R_0805_2012Metric | R22, R55 |
| 2 | 6.8k | Resistor_SMD:R_0805_2012Metric | R11, R42 |
| 2 | 6N136S | Package_DIP:SMDIP-8_W9.53mm | U3, U7 |
| 2 | 96pF | Capacitor_SMD:C_0805_2012Metric | C29, C56 |
| 2 | BUK7880-55A | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q6, Q18 |
| 2 | BYV26E | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D15, D35 |
| 2 | BZX85C20 | Diode_SMD:D_MELF | D19, D40 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric | C41, C68 |
| 2 | Conn_01x02 | IGBT-DRIVER-emad:IGBT_Socket | J4, J5 |
| 2 | D45VH10 | Package_TO_SOT_SMD:TO-252-2 | Q12, Q24 |
| 2 | Dz10v | Diode_SMD:D_MELF | D16, D36 |
| 2 | Dz8v | Diode_SMD:D_MELF | D10, D29 |
| 2 | Fuse | IGBT-DRIVER-emad:fuse.holder.1808 | F2, F3 |
| 2 | LED_Blue_0805 | kicadFP:LED_BLUE_0805 | D23, D37 |
| 2 | LED_Yellow_0805 | kicadFP:LED_Yellow_0805 | D5, D24 |
| 2 | SMCJ7A | IGBT-DRIVER-emad:DIOM7959X250N | D13, D32 |
| 2 | Screw_Terminal_01x01 | IGBT-DRIVER-emad:COOLERI | J2, J3 |
| 2 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm | JP1, JP2 |
| 2 | d44vh10 | Package_TO_SOT_SMD:TO-252-2 | Q11, Q23 |
| 2 | miw06-24s24 | IGBT-DRIVER-emad:MIWI06 | U1, U2 |
| 1 | 10uh | kicadFP:L_12x12mm_H6mm | L1 |
| 1 | Conn_02x05_Odd_Even | kicadFP:IDC-Header_2x05-1MP_P2.54mm_Latch_Horizontal | J1 |
| 1 | DB107S | kicadFP:DIOB_DB107S | BR1 |
| 1 | Fuse_Small | IGBT-DRIVER-emad:fuse.holder.1808 | F1 |
| 1 | L7833s(D2pack) | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U11 |
| 1 | LED_Green_0805 | kicadFP:LED_Green_0805 | D2 |
| 1 | LOGO | IGBT-DRIVER-emad:koalaLogo | G1 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo_5.7x6mm_SilkScreen | LOGO1 |
| 1 | SYM_Arrow45_Normal | IGBT-DRIVER-emad:skm200GB | IGBTSymbol1 |
Similar boards
- 2 layers147 × 76 mm

- 4 layers125.6 × 75 mm

MIMO SAR RADAR
siru409/Dilf-seeker
A near field multi beam ultra wideband fmcw radar detector using a novel near field focussed rotman lens
277 parts - 2 layers136 × 88 mm

- 2 layers52 × 36 mm

Lt3758 iso flyback manual
freudenthal/skidl-eda
skidl-eda: AI circuit-design loop harness on the skidl stack
36 parts - 2 layers59.2 × 48.8 mm

- 4 layers172 × 140.5 mm

- 4 layers121.9 × 66 mm

- 2 layers54.4 × 63.7 mm

WiC64 Plugin
WiC64-Team/wic64-hardware
WiC64 WiFi Adapter schematics and gerber files
59 parts20CC-BY-4.0
Questions
How big is the IGBT DRIVER PCB?
It measures 139.2 × 95.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IGBT DRIVER use?
240 parts, built around the PS2801-1, 6N136S, BC817 and BC807. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IGBT DRIVER KiCad files?
From the EmadBahra/open-source-IGBT-gate-driver repository on GitHub, at the commit this page was made from: the board is IGBT DRIVER.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the IGBT DRIVER design in my own project?
Its repository states no licence, so its author keeps all rights: ask EmadBahra before reusing the design.