4 layers90.3 × 26.6 mm
4 layers68.3 × 25.4 mm
Flutter ARM R5 Basic
flutterwireless/kicad_conversionconverting the Flutter main boards to KiCAD
- Size
- 68.3 × 25.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 288
- Nets
- 68
- Pads
- 525
- Tracks, vias
- 906, 114
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 29 Jan 2018
- Updated
- 29 Jan 2018
Overview
Flutter ARM R5 Basic is an open-source printed circuit board by flutterwireless, from the flutterwireless/kicad_conversion repository on GitHub. It is a 4-layer board of 68.3 × 25.4 mm with 288 parts on 68 nets, routed with 906 tracks and 114 vias.
It is built around the CC1200RHB, MCP73831 and MIC5235-3.3BM5, with the M20 among its other parts. Its parts include 36 capacitors, 22 resistors, 7 ICs, 4 diodes and 2 inductors.
Main components
4
CC1200RHB
VQFN-32-EP(5x5)-123dBm -40℃~+85℃ 1.25Mbps 164MHz~950MHz 16dBm 23mA 2V~3.6V 46mA 869.5MHz ISM、802.15.4 Power-on reset function、Supports RSSI function、Supports FEC function、CRC check function、Automatic response function、Automatic retransmission function SPI transceiver VQFN-32-EP(5x5) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
MCP73831
UncategorisedMicrochip Technology
MIC5235-3.3BM5
SOT-23-5-40℃~+125℃ 1 150mA 24V 3.3V 500mV@(150mA) Fixed Over Current Protection、Overheat protection、Reverse connection protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
M20
SMA(DO-214AC)-55℃~+125℃ 1A 2V@1A 2kV 30A 5uA@2kV Independent SMA(DO-214AC) Diodes - General Purpose ROHSLGEDiodes - General Purpose
README
README.mdFlutter Basic KiCAD Version
I am working on converting Flutter (and myself) over to KiCAD.
This version is not yet ready to fab, but the copper is close and I am confident that moving to KiCAD will work.
Taylor
Parts
288| Qty | Value | Footprint | References |
|---|---|---|---|
| 192 | VPDEV0 | VPAC0 | VP_0, VP_1, VP_10, VP_11, VP_100, VP_101, VP_102, VP_103, VP_104, VP_105, VP_106, VP_107, VP_108, VP_109, VP_110, VP_111 +176 |
| 12 | @HOLE0, @HOLE1, @HOLE2, @HOLE3, @HOLE4, @HOLE5, @HOLE6, @HOLE7, @HOLE8, @HOLE9, @HOLE10, @HOLE11 | ||
| 11 | 47nF | 0402-CAP | C11, C51, C121, C131, C151, C221, C251, C261, C271, C281, C291 |
| 10 | 0.1uF | 0402-CAP | C4, C5, C32, C33, C34, C35, C36, C37, C38, C41 |
| 4 | 15pF | 0402-CAP | C42, C43, C301, C311 |
| 4 | 2k | 0402-RES | R8, R14, R15, R22 |
| 3 | 10R | 0402-RES | R2, R10, R171 |
| 3 | 1k | 0402-RES | R3, R6, R21 |
| 3 | DNS | 0402-RES | R7, R17, R20 |
| 3 | VPDEV1 | VPAC1 | VP_75, VP_76, VP_77 |
| 2 | SOD-323 | D1, D2 | |
| 2 | 0.01uF | 0402-CAP | C171, C211 |
| 2 | 0R | 0402-RES | R18, R19 |
| 2 | 10k | 0402-RES | R11, R13 |
| 2 | 2.2uF | 0402-CAP | C39, C40 |
| 2 | 27R | 0402-RES | R1, R4 |
| 2 | 4.7uF 35v 490-7208-1-ND | 0808-CAP | C2, C3 |
| 2 | M20 | 1X20 | JP2, JP4 |
| 2 | SNAP_DOME | 12MM_SNAP_DOME_SMALLER | U$11, U$12 |
| 1 | P-LCC-4-3 | LED1 | |
| 1 | 0.012uH | 0402-IND | L204 |
| 1 | 0.01uH | 0402-IND | L171 |
| 1 | 0.22uF | 0402-CAP | C61 |
| 1 | 1.5nF | 0402-CAP | C231 |
| 1 | 100pF | 0402-CAP | C172 |
| 1 | 12MHz | XTAL_ABRACON_ABM8G_3.2MMX2.5MM | X1 |
| 1 | 1pF | 0402-CAP | C203 |
| 1 | 33pF | 0402-CAP | C173 |
| 1 | 40MHz | XTAL_EPSON_FA_128_2MMX1.6MM | X2 |
| 1 | 500mA | 0603-PTC | F1 |
| 1 | 56K Ohm | 0402-RES | R141 |
| 1 | 6.49k | 0402-RES | R5 |
| 1 | 68R | 0402-RES | R9 |
| 1 | ATSHA204/ATECC108UDFN | UDFN_8_ATSHA204 | U6 |
| 1 | BALUN_CC1200 | IPC_BALUN_CC1200 | U5 |
| 1 | CC1200 | QFN-32 | U2 |
| 1 | LOGO | converted_artwork:flutter_basic_1200dpi_rotated | G*** |
| 1 | MCP73831 | SOT23-5 | U4 |
| 1 | MIC5235-3.3 | SOT23-5 | U1 |
| 1 | MICRO_USB | MICRO-USB-SLOT-2 | U$2 |
| 1 | OSHW-LOGOS | OSHW-LOGO-S | U$1 |
| 1 | RED | LED-0603 | D11 |
| 1 | SAM3S4/2/1A_48PIN_LQFP | LQFP48 | U3 |
| 1 | U.FL | U.FL | U7 |
Questions
How big is the Flutter ARM R5 Basic PCB?
It measures 68.3 × 25.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Flutter ARM R5 Basic use?
288 parts, built around the CC1200RHB, MCP73831, MIC5235-3.3BM5 and M20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flutter ARM R5 Basic KiCad files?
From the flutterwireless/kicad_conversion repository on GitHub, at the commit this page was made from: the board is Flutter_ARM_R5_Basic.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flutter ARM R5 Basic design in my own project?
Its repository states no licence, so its author keeps all rights: ask flutterwireless before reusing the design.
Similar boards
- 4 layers202 × 125 mm
- 4 layers99.6 × 43.7 mm
- 4 layers65.1 × 30.2 mm
- 2 layers57.2 × 57.2 mm
- 6 layers90 × 45 mm
Hw tele stern
shorlee/TeleSTERN
The TeleSTERN Project is an Open Source Rocketry Flight Computer based on the TeleMega by Altus Metrum.
303 parts3GPL-3.0 - 4 layers90 × 90 mm
Sahel pcb
Aliou8/SAHEL-SPECTRA-RF
CubeSat for educational purposes. It is based on an STM32H7 MCU for data handling and uses two CC1125 radios for communication. The software is developed using a Zephyr-like RTOS.
172 parts2GPL-3.0 - 4 layers76.2 × 25.4 mm
