8 layers22.3 × 77.5 mm
Tinker mantis
Tinkerbug-Robotics/TinkerRocket
Model rocket flight computer, ground station, iOS app, and simulation
279 parts1GPL-3.0
4 layers76.2 × 25.4 mm
Flight computer
BluCodeGH/tvc- Size
- 76.2 × 25.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 116
- Nets
- 90
- Pads
- 419
- Tracks, vias
- 896, 285
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 Oct 2025
- Updated
- 31 Oct 2025
Overview
Flight computer is an open-source printed circuit board by BluCodeGH, from the BluCodeGH/tvc repository on GitHub. It is a 4-layer board of 76.2 × 25.4 mm with 116 parts on 90 nets, routed with 896 tracks and 285 vias.
It is built around the CC1200RHB, MS560702BA03-50 and TPS565242DRL, with the W25Q128JVSIQ, LSM6DSR and S0951-46R among its other parts. Its parts include 45 capacitors, 27 resistors, 10 connectors, 9 ICs and 9 inductors. It belongs with the STM32 boards of this library.
Main components
12
CC1200RHB
VQFN-32-EP(5x5)-123dBm -40℃~+85℃ 1.25Mbps 164MHz~950MHz 16dBm 23mA 2V~3.6V 46mA 869.5MHz ISM、802.15.4 Power-on reset function、Supports RSSI function、Supports FEC function、CRC check function、Automatic response function、Automatic retransmission function SPI transceiver VQFN-32-EP(5x5) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
MS560702BA03-50
SMD-8P-40℃~+85℃ 1.5mbar 1.8V~3.6V 140nA 1Kpa~1.2bar I2C、SPI Yes SMD-8P Pressure Sensors ROHSTE ConnectivityPressure Sensors
TPS565242DRL
SOT-563-40℃~+125℃@(TJ) 1 120uA 3V~16V 5A 600kHz 600mV~7V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting Step-down type Yes SOT-563 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
LSM6DSR
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 9KB Accelerometer Gyroscope SPI、I2C、MIPI I3C X,Y,Z X,Y,Z ±16g ±4000dps LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
S0951-46R
-- Shielding clip ROHSHarwinAntennaShrapnel
OSTTE020104
插件,P=3.5mm-40℃~+115℃ 1 10A 125V 16~26 1x2P 2 2P 3.5mm Black Through Hole 插件,P=3.5mm Screw Terminal Blocks ROHSOn-Shore TechScrew Terminal Blocks
PMEG3010ER
SOD-123W1 Independent 1.5mA@30V 1A 30V 360mV@1A 50A SOD-123W Schottky Diodes ROHSNexperiaSchottky Diodes
PMV20XNER
SOT-23-55℃~+150℃ 1 N-channel 1.15nF 1.2W 19mΩ@4.5V 30V 650mV 7.2A 85pF SOT-23 MOSFETs ROHSNexperiaMOSFETs
0685T7000-01
1206-55℃~+125℃ 50A 63V 63V 7A 1206 Disposable fuses ROHSBel FuseDisposable Fuses20021321-00008T4LF
SMD,P=1.27mmUncategorisedAmphenol
ABM10-40.000MHZ-D30-T3
SMD2520-4P-40℃~+85℃ 10pF 40MHz 70Ω ±20ppm ±30ppm SMD2520-4P Crystals ROHSAbraconCrystals
Parts
116| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C5, C13, C14, C15, C16, C17, C20, C21, C22, C23 |
| 11 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R9, R12, R15, R17, R18, R19, R20, R28, R31, R33 |
| 11 | 47n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26, C28, C29, C30, C31, C32, C33, C35, C37, C38, C39 |
| 5 | 30k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R8, R16, R32 |
| 4 | 12n | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L4, L5, L7, L9 |
| 4 | S0951-46R | FC_Lib:S0951-46R | H3, H4, H5, H6 |
| 4 | SERVO | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7, J8, J9, J10 |
| 3 | 15p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C25, C27, C41 |
| 3 | OSTTE020104 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J1, J2, J6 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C34, C44 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R29 |
| 2 | 2.2u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C11 |
| 2 | 20R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R23 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C7 |
| 2 | 3.3p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C42, C43 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24, R25 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2 |
| 2 | PMEG3010ER | Diode_SMD:Nexperia_CFP3_SOD-123W | D1, D2 |
| 2 | PMV20XNER | Package_TO_SOT_SMD:SC-59_Handsoldering | Q2, Q3 |
| 1 | 0685T7000-01 | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 1.5n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24 |
| 1 | 100p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C46 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27 |
| 1 | 10n | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 15n | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L3 |
| 1 | 18n | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L8 |
| 1 | 1p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C45 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19 |
| 1 | 2.2p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C47 |
| 1 | 20021321-00008T4LF | Connector_PinSocket_1.27mm:PinSocket_2x04_P1.27mm_Vertical_SMD | J3 |
| 1 | 220n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C36 |
| 1 | 24949 | FC_Lib:Screw Switch | SW1 |
| 1 | 270k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 33p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C40 |
| 1 | 3p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C48 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 44u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 56k 1% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26 |
| 1 | 5mR | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 7.5n | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L6 |
| 1 | ABM10-40.000MHZ-D30-T3 | FC_Lib:R2016 | Y1 |
| 1 | ASMB-MTB0-0B3A2 | LED_SMD:LED_Avago_PLCC4_3.2x2.8mm_CW | D3 |
| 1 | AZ1117CH-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | CC1200 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm_ThermalVias | U9 |
| 1 | INA180A2 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | LSM6DSR | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U7 |
| 1 | MPZ2012S102AT000 | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1 |
| 1 | MS5607-02BA03 | Package_LGA:LGA-8_3x5mm_P1.25mm | U8 |
| 1 | RF2-03E-T-00-50-G | Connector_Coaxial:SMA_Amphenol_901-143_Horizontal | J5 |
| 1 | SMD1206B050TF/15 | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F2 |
| 1 | SRP4020FA-2R2M | FC_Lib:SRP4020FA | L1 |
| 1 | STM32H523CETx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U5 |
| 1 | TPS565242 | Package_TO_SOT_SMD:SOT-563 | U1 |
| 1 | USB4085-GF-A | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J4 |
| 1 | VN750PS-E | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U6 |
Questions
How big is the Flight computer PCB?
It measures 76.2 × 25.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Flight computer use?
116 parts, built around the CC1200RHB, MS560702BA03-50, TPS565242DRL and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flight computer KiCad files?
From the BluCodeGH/tvc repository on GitHub, at the commit this page was made from: the board is flight_computer/flight_computer.kicad_pcb and its schematic flight_computer/flight_computer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flight computer design in my own project?
Its repository states no licence, so its author keeps all rights: ask BluCodeGH before reusing the design.
Similar boards
- 2 layers51.5 × 32.7 mm
- 4 layers244.5 × 91 mm
- 4 layers100 × 100 mm
- 4 layers38.6 × 40.3 mm
Strato connect
kevinlutzer/strato-connect
A RF module you can comunicate with over I2C to send AX.25 formatted data over (G)FSK
49 partsApache-2.0 - 4 layers240 × 87 mm
Backplane
Ashet-Technologies/Home-Computer
A retro-inspired home-computer project.
637 parts20CERN-OHL-P-2.0 - 2 layers100 × 100 mm
Open65
Maverick-Shark/X65_BigMiST
The X65 is an ultimate computer for everyone interested in the venerable 65-series of 8-bit and 16-bit CPUs, i.e. the 6502 and 65816.
195 partsMIT - 6 layers76.5 × 339.8 mm
Fmc host
open-ephys/onix-fmc-host
FMC board to acquire from ONIX headstages and breakout boards
320 parts5