6 layers73 × 100 mm
2 layers80 × 100 mm
Flt06
flukso/flt06PCB for testing the Fluksometer
- Size
- 80 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 42
- Pads
- 216
- Tracks, vias
- 418, 22
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 12 Sep 2017
- Updated
- 13 Sep 2017
Overview
Flt06 is an open-source printed circuit board by flukso, from the flukso/flt06 repository on GitHub, published under the MIT licence. It is a 2-layer board of 80 × 100 mm with 96 parts on 42 nets, routed with 418 tracks and 22 vias.
It is built around the OPA2192ID, INA106U and OPA192ID, with the STPS160A, BSS138 and SMAJ30CA among its other parts. Its parts include 28 capacitors, 20 connectors, 19 resistors, 10 ICs and 7 diodes.
Main components
6
OPA2192ID
SOIC-8-18V~-2.25V、2.25V~18V -40℃~+125℃ 10MHz 140dB 1mA 2 200nV/℃ 20V/us 2pA 4.5V~36V 5.5nV/√Hz@1kHz 5pA 5uV 65mA EMI filtering/RF suppression、Zero drift / auto-zero Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Precision Op Amps ROHSTexas InstrumentsPrecision Op AmpsINA106U
SOIC-8-40℃~+85℃ 0.2uV/℃ 20uV 50V/us 86dB Capacitive load driving、Integrated precision resistor network、Current limiting / short-circuit protection Single-channel SOIC-8 Differential Amplifiers ROHSTexas InstrumentsDifferential AmplifiersOPA192ID
SOIC-8-18V~-2.25V、2.25V~18V -40℃~+125℃ 1 10MHz 140dB 1mA 200nV/℃ 20V/us 2pA 4.5V~36V 5.5nV/√Hz@1kHz 5pA 5uV 65mA Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Precision Op Amps ROHSTexas InstrumentsPrecision Op Amps
STPS160A
SMA(DO-214AC)1 Independent 1A 4uA@60V 60V 670mV@1A 75A SMA(DO-214AC) Schottky Diodes ROHSSTMicroelectronicsSchottky Diodes
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsSMAJ30CA
DO-214AC(SMA)-55℃~+150℃ 1 30V 33.3V 400W 48.4V 5uA 8.3A Bidirectional TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)
README
README.mdflt06
PCB for testing the Fluksometer
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100nF | Capacitors_SMD:C_0603 | C5, C10, C11, C12, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28 +4 |
| 12 | TEST_1P | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J7, J8, J9, J10, J11, J12, J13, J14, J15, J16, J17, J18 |
| 7 | Screw_Terminal_1x02 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | J2, J3, J4, J5, J6, J19, J20 |
| 6 | STPS160A | Diodes_SMD:D_SMA | D1, D2, D4, D5, D6, D7 |
| 5 | LT1010 | TO-220-5:TO-220-5_Pentawatt_Multiwatt-5_Vertical_StaggeredType1 | U3, U7, U8, U9, U10 |
| 4 | 0 | Resistors_SMD:R_0603 | R1, R7, R9, R14 |
| 4 | 0 | Resistors_SMD:R_1206 | R16, R17, R18, R19 |
| 4 | 100pF | Capacitors_SMD:C_0603 | C3, C13, C14, C16 |
| 4 | 15k8 | Resistors_SMD:R_0603 | R2, R3, R10, R11 |
| 3 | R6H-2.5T | Resistors_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P5.08mm_Vertical | L1, L2, L3 |
| 2 | 10k | Resistors_SMD:R_0603 | R8, R15 |
| 2 | 10u | Capacitors_SMD:C_1210 | C1, C2 |
| 2 | 1M | Resistors_SMD:R_0603 | R4, R12 |
| 2 | 22u | Capacitors_SMD:C_1210 | C4, C15 |
| 2 | 5k9 | Resistors_SMD:R_0603 | R6, R13 |
| 2 | OPA2192 | Housings_SSOP:TSSOP-8_3x3mm_Pitch0.65mm | U1, U5 |
| 1 | 1 | Resistors_SMD:R_1206 | R5 |
| 1 | BSS138 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | INA106 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U6 |
| 1 | INA106_R | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | OPA192 | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | SMAJ30CA | Diodes_SMD:D_SMA | D3 |
| 1 | Screw_Terminal_1x03 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_3pol | J1 |
| 1 | flukso | logo:logo_mask | flukso |
| 1 | fluksobot | logo:logo_bot_mask | fluksobot |
The 90 most common of 96 parts.
Questions
How big is the Flt06 PCB?
It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Flt06 use?
96 parts, built around the OPA2192ID, INA106U, OPA192ID and STPS160A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flt06 KiCad files?
From the flukso/flt06 repository on GitHub, at the commit this page was made from: the board is flt06.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flt06 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers36 × 20 mm
- 6 layers175 × 150 mm
- 4 layers255.9 × 224.5 mm
Central control unit
RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system
1,880 parts1 - 4 layers71 × 21.6 mm
EMGAmplifier
Arjun-Mahes/EMGAmplifier
made an EMG amplifier PCB from scratch that streams filtered raw and enveloped outputs wirelessly using an ESP32
63 parts - 2 layers72.4 × 44.5 mm
MilliOhm Meter
Dirkmeister/MilliOhm-Meter
MilliOhm - Meter PCB based on Scullcons MilliOhm-Meter Design
43 parts - 2 layers72 × 47 mm
- 4 layers90 × 100 mm
