Skip to the content
PCBKitNew board
OPA2192ID on a board, in 3D

OPA2192ID

Texas Instruments

-18V~-2.25V、2.25V~18V -40℃~+125℃ 10MHz 140dB 1mA 2 200nV/℃ 20V/us 2pA 4.5V~36V 5.5nV/√Hz@1kHz 5pA 5uV 65mA EMI filtering/RF suppression、Zero drift / auto-zero Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Precision Op Amps ROHS

Extended
DatasheetJLCPCBLCSCti/OPA2192ID
Category
Precision Op Amps
Package
SOIC-8
Pins
8

Overview

The OPA2192ID is a precision Op Amp made by Texas Instruments in a SOIC-8 package with 8 pins. -18V~-2.25V、2.25V~18V -40℃~+125℃ 10MHz 140dB 1mA 2 200nV/℃ 20V/us 2pA 4.5V~36V 5.5nV/√Hz@1kHz 5pA 5uV 65mA EMI filtering/RF suppression、Zero drift / auto-zero Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Precision Op Amps ROHS.

PCBKit's library has its KiCad symbol (Operational Amplifiers:Operational Amplifier x2 Type1 [alt], from CERN's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 35,295 are in stock at JLCPCB (part C110074). 18 open-source boards in 15 repositories on GitHub use it.

Symbol

84V+V-321
Operational Amplifiers:Operational Amplifier x2 Type1 [alt]From CERN's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

10
Supply, least
4.5 V · V+ – V–, recommended operating minimum, single supply · p. 6
Supply, most
36 V · V+ – V–, recommended operating maximum, single supply · p. 6
Supply, absolute maximum
40 V · V+ – V–, absolute maximum supply voltage · p. 6
Works from
-40 °C · minimum rated ambient temperature · p. 6
Works up to
125 °C · maximum rated ambient temperature · p. 6
Junction, hottest
150 °C · maximum junction temperature · p. 6
Takes working
2 mA · sum of two amplifiers' typical quiescent currents, IO = 0 A · p. 9
Junction to air (D (SOIC))
107.9 K/W · junction-to-ambient thermal resistance · p. 7
Junction to board (D (SOIC))
48.9 K/W · junction-to-board thermal resistance · p. 7
Junction to case (D (SOIC))
53.9 K/W · junction-to-case top thermal resistance · p. 7

What it is and has

11
Input/output
Rail-to-rail input and output · p. 1
Input offset voltage
±5µV · p. 1
Input voltage noise density
5.5nV/√Hz at 1kHz · p. 1
Common-mode rejection
140dB · p. 1
Input bias current
±5pA · p. 1
Gain-bandwidth product
10MHz · p. 1
Slew rate
20V/µs · p. 1
Input filtering
EMI/RFI filtered inputs · p. 1
Differential input range
Extends to supply rails · p. 1
Capacitive load drive
1nF · p. 1
Channels and package options
Dual; SOIC-8 and VSSOP-8 · p. 1

Specifications

93
ParameterConditionsAs printedPage
电源电压，VS = (V+) – (V–) VSSingle supplymax 40 V6
信号输入引脚 电流min -10 · max 10 mA6
工作 温度范围min -55 · max 150 °C6
工作 结温max 150 °C6
储存温度，Tstg Tstgmin -65 · max 150 °C6
静电放电 V(ESD)人体放电模型 (HBM)，符合 ANSI/ESDA/JEDEC JS-001 (1)min -4000 · max 4000 V6
静电放电 V(ESD)OPA2192; 充电器件模型 (CDM)，符合 JEDEC 规范 JESD22-C101 (2)min -750 · max 750 V6
电源电压，VS = (V+) – (V–) VSSingle supplymin 4.5 · max 36 V6
电源电压，VS = (V+) – (V–) VSSplit supply, magnitude of each railmin 2.25 · max 18 V6
额定温度范围min -40 · max 125 °C6
结至环境热阻 RθJAOPA2192, D (SOIC), 8 引脚typ 107.9 °C/W7
结至芯片外壳（顶部）热阻 RθJC(top)OPA2192, D (SOIC), 8 引脚typ 53.9 °C/W7
结至电路板热阻 RθJBOPA2192, D (SOIC), 8 引脚typ 48.9 °C/W7
结至顶部的特征参数 ψJTOPA2192, D (SOIC), 8 引脚typ 6.6 °C/W7
结至电路板的特征参数 ψJBOPA2192, D (SOIC), 8 引脚typ 48.3 °C/W7
输入失调电压 VOSTA = +25°C; VCM = VOUT = VS / 2; RLOAD = 10kΩ to VS / 2typ 5 · max 25 uV8
输入失调电压 VOSTA = 0°C 至 85°C; VCM = VS / 2typ 8 · max 50 uV8
输入失调电压 VOSTA = -40°C 至 +125°C; VCM = VS / 2typ 10 · max 75 uV8
输入失调电压 VOSTA = +25°C; VCM = (V+) – 1.5Vtyp 10 · max 40 uV8
输入失调电压 VOSVCM = (V+) – 1.5V; TA = 0°C 至 85°Ctyp 25 · max 150 uV8
输入失调电压 VOSVCM = (V+) – 1.5V; TA = -40°C 至 +125°Ctyp 50 · max 250 uV8
输入失调电压漂移 dVOS/dT仅 D 封装; TA = 0°C 至 85°Ctyp 0.1 · max 0.5 uV/°C8
输入失调电压漂移 dVOS/dT仅 D 封装; TA = -40°C 至 +125°Ctyp 0.15 · max 0.8 uV/°C8
电源抑制比 PSRRTA = -40°C 至 +125°Ctyp 0.3 · max 1 uV/V8
输入偏置电流 IBTA = +25°Ctyp 5 · max 20 pA8
输入偏置电流 IBTA=-40°C 至 +125°Cmax 5 nA8
输入偏移电流 IOSTA = +25°Ctyp 2 · max 20 pA8
输入偏移电流 IOSTA=-40°C 至 +125°Cmax 2 nA8
输入电压噪声 En(V-)-0.1V<VCM<(V+)-3V; f = 0.1Hz 至 10Hztyp 1.3 uVPP8
输入电压噪声 En(V+) – 1.5V < VCM < (V+) + 0.1V; f = 0.1Hz 至 10Hztyp 4 uVPP8
输入电压噪声密度 en(V-)-0.1V<VCM<(V+)-3V; f = 100Hztyp 10.5 nV/√Hz8
输入电压噪声密度 en(V-)-0.1V<VCM<(V+)-3V; f=1kHztyp 5.5 nV/√Hz8
输入电压噪声密度 en(V+) – 1.5V < VCM < (V+) + 0.1V; f = 100Hztyp 32 nV/√Hz8
输入电压噪声密度 en(V+) – 1.5V < VCM < (V+) + 0.1V; f = 1kHztyp 12.5 nV/√Hz8
输入电流噪声密度 inf=1kHztyp 1.5 fA/√Hz8
共模抑制比 CMRR(V-)-0.1V<VCM<(V+)-3V; TA = +25°Cmin 120 · typ 140 dB8
共模抑制比 CMRR(V-)-0.1V<VCM<(V+)-3V; TA = -40°C 至 +125°Cmin 114 · typ 126 dB8
共模抑制比 CMRR(V+) – 1.5V < VCM < (V+); TA = +25°Cmin 100 · typ 120 dB8
共模抑制比 CMRR(V+) – 1.5V < VCM < (V+); TA = -40°C 至 +125°Cmin 86 · typ 100 dB8
开环电压增益 AOL(V–) + 0.6V < VO < (V+) – 0.6V，RLOAD = 2kΩ; TA = +25°Cmin 120 · typ 134 dB8
开环电压增益 AOL(V–) + 0.6V < VO < (V+) – 0.6V，RLOAD = 2kΩ; TA = -40°C 至 +125°Cmin 114 · typ 126 dB8
开环电压增益 AOL(V–) + 0.3V < VO < (V+) – 0.3V，RLOAD = 10kΩ; TA = +25°Cmin 126 · typ 140 dB8
开环电压增益 AOL(V–) + 0.3V < VO < (V+) – 0.3V，RLOAD = 10kΩ; TA = -40°C 至 +125°Cmin 120 · typ 134 dB8
单位带宽增益积 GBWTA = +25°Ctyp 10 MHz9
压摆率 SRG = 1，10V阶跃typ 20 V/us9
稳定时间 ts达 0.01%; VS = ±18V，G = 1，10V 阶跃typ 1.4 us9
稳定时间 ts达 0.01%; VS = ±18V，G = 1，5V 阶跃typ 0.9 us9
稳定时间 ts达 0.001%; VS = ±18V，G = 1，10V 阶跃typ 2.1 us9
稳定时间 ts达 0.001%; VS = ±18V，G = 1，5V 阶跃typ 1.8 us9
过载恢复时间 tORVIN × G = VStyp 200 ns9
总谐波失真 + 噪声 THD+NG = 1，f = 1kHz，VO = 3.5VRMStyp 0.00008 %9
串扰OPA2192，在 dc 下typ 150 dB9
串扰OPA2192，f = 100kHztyp 130 dB9
电压输出摆幅到 VO正电源轨; 无负载typ 5 · max 15 mV9
电压输出摆幅到 VO正电源轨; RLOAD = 10kΩtyp 95 · max 110 mV9
电压输出摆幅到 VO正电源轨; RLOAD = 2kΩtyp 430 · max 500 mV9
电压输出摆幅到 VO负电源轨; 无负载typ 5 · max 15 mV9
电压输出摆幅到 VO负电源轨; RLOAD = 10kΩtyp 95 · max 110 mV9
电压输出摆幅到 VO负电源轨; RLOAD = 2kΩtyp 430 · max 500 mV9
短路电流 ISC±65 mAtyp 65 mA9
开环输出阻抗 ZOf=1MHz，IO = 0A，请参阅图 31typ 375 Ω9
每个放大器的静态电流 IQIO = 0A; TA = +25°Ctyp 1 · max 1.2 mA9
每个放大器的静态电流 IQTA = –40°C 至 +125°C，IO = 0Amax 1.5 mA9
过热保护 (1)typ 140 °C9
输入失调电压 VOSVCM = (V+) – 3V; TA = +25°Ctyp 5 · max 25 uV10
输入失调电压 VOSVCM = (V+) – 3V; TA = 0°C 至 85°Ctyp 8 · max 50 uV10
输入失调电压 VOSVCM = (V+) – 3V; TA = -40°C 至 +125°Ctyp 10 · max 75 uV10
输入失调电压 VOSVCM = (V+) – 1.5V; TA = +25°Ctyp 10 · max 40 uV10
输入失调电压 VOSVCM = (V+) – 1.5V; TA = 0°C 至 85°Ctyp 25 · max 150 uV10
输入失调电压漂移 dVOS/dTVCM = (V+) – 3V; 仅有D封装; TA = 0°C 至 85°Ctyp 0.1 · max 0.5 uV/°C10
输入失调电压漂移 dVOS/dTVCM = (V+) – 3V; 仅有D封装; TA = -40°C 至 +125°Ctyp 0.15 · max 0.8 uV/°C10
输入失调电压漂移 dVOS/dTVCM = (V+) – 1.5V，TA = –40°C 至 +125°Ctyp 0.5 · max 3 uV/°C10
电源抑制比 PSRRTA = –40°C 至 +125°C，VCM = VS / 2 – 0.75Vtyp 1 uV/V10
输入电压噪声 En(V–) – 0.1V < VCM < (V+) – 3V，f = 0.1Hz 至 10Hztyp 1.3 uVPP10
输入电压噪声 En(V+) – 1.5V < VCM < (V+) + 0.1V，f = 0.1Hz 至 10Hztyp 4 uVPP10
共模抑制比 CMRR(V–) – 0.1V < VCM < (V+) – 3V; TA = +25°Cmin 94 · typ 110 dB10
共模抑制比 CMRR(V–) – 0.1V < VCM < (V+) – 3V; TA = -40°C 至 +125°Cmin 90 · typ 104 dB10
共模抑制比 CMRR(V+) – 1.5V < VCM < (V+); TA = -40°C 至 +125°Cmin 84 · typ 100 dB10
开环电压增益 AOL(V–) + 0.6V < VO < (V+) – 0.6V，RLOAD = 2kΩ; TA = +25°Cmin 110 · typ 120 dB10
开环电压增益 AOL(V–) + 0.6V < VO < (V+) – 0.6V，RLOAD = 2kΩ; TA = -40°C 至 +125°Cmin 100 · typ 114 dB10
开环电压增益 AOL(V–) + 0.3V < VO < (V+) – 0.3V，RLOAD = 10kΩ; TA = +25°Cmin 110 · typ 126 dB10
开环电压增益 AOL(V–) + 0.3V < VO < (V+) – 0.3V，RLOAD = 10kΩ; TA = -40°C 至 +125°Cmin 110 · typ 120 dB10
稳定时间 ts达 0.01%; VS = ±3V，G = 1，5V 阶跃typ 1 us11
过载恢复时间 tORVIN× G = VStyp 200 ns11
电源轨的电压输出摆幅 VO正电源轨; 无负载typ 5 · max 15 mV11
电源轨的电压输出摆幅 VO正电源轨; RLOAD = 10kΩtyp 95 · max 110 mV11
电源轨的电压输出摆幅 VO正电源轨; RLOAD = 2kΩtyp 430 · max 500 mV11
电源轨的电压输出摆幅 VO负电源轨; 无负载typ 5 · max 15 mV11
电源轨的电压输出摆幅 VO负电源轨; RLOAD = 10kΩtyp 95 · max 110 mV11
电源轨的电压输出摆幅 VO负电源轨; RLOAD = 2kΩtyp 430 · max 500 mV11
开环输出阻抗 ZOf=1MHz，IO = 0A，请参阅 图 31typ 375 Ω11
每个放大器的静态电流 IQIO = 0A; TA = +25°Ctyp 1 · max 1.2 mA11
每个放大器的静态电流 IQIO = 0A; TA = -40°C 至 +125°Cmax 1.5 mA11

Ordering codes, by the datasheet

1
OPA2192IDRG4.B
SOIC (D) | 8 · 2500 | LARGE T&R; -40 to 125°C; NIPDAU lead finish · p. 40

Parameters

23
Common Mode Rejection Ratio(CMRR)
140dB
Current - Supply
2mA
Dual Supply
-18V~-2.25V
Features
Zero drift / auto-zero
Gain Bandwidth Product
10MHz
Ib - Input Bias Current
5pA
Input Offset Current(Ios)
2pA
Input Offset Voltage Drift(Vos TC)
200nV/℃
Input Voltage Noise Density
5.5nV/√Hz@1kHz
Junction Temperature(Max)
150℃
Number of Channels
2
Operating Temperature
-40℃~+125℃
Output Current
65mA
Quiescent Current(Iq)
1mA
Rail to Rail
Rail-to-Rail Input, Rail-to-Rail Output
Single Supply
4.5V~36V
Slew Rate
20V/us
Thermal Resistance(Junction to Ambient)
107.9℃/W
Thermal Resistance(Junction to Board)
48.9℃/W
Thermal Resistance(Junction to Case)
53.9℃/W
Voltage - Supply
4.5V~36V
Voltage - Supply(Absolute Max)
40V
Vos - Input Offset Voltage
5uV

Order codes

2

Pinout

8
The pins of the OPA2192ID
PinNameType
1OUTOutput
2IN-Input
3IN+Input
4V-Power in
5IN+Input
6IN-Input
7OUTOutput
8V+Power in

Open-source boards using it

All 18
  • 2 layers50 × 50 mmTdstatv3, the printed circuit board in 3D

    Tdstatv3

    thomasdob/tdstatv3

    A USB-controlled potentiostat/galvanostat for thin-film battery characterization

    71 parts23GPL-3.0
  • 2 layers37.5 × 24 mmVectorScopeMusicAddon, the printed circuit board in 3D

    VectorScopeMusicAddon

    davedarko/VectorScopeMusicAddon

    A small add-on for the Hackaday Supercon 2023 / Europe 2024 event badge that allows displaying oscilloscope music

    16 parts2CC0-1.0
  • 4 layers138.4 × 138.3 mmGRBL board, the printed circuit board in 3D

    GRBL board

    ephemeridis/GRBL_board

    This is a PCB designed to run GRBL, an open source CNC control software that is designed and optimised for Arduino.

    287 parts2GPL-3.0
  • 4 layers43.2 × 36.8 mmPi pico dds, the printed circuit board in 3D

    Pi pico dds

    gabeak2/RP2040_PIO_DAC

    RP2040 PCB with a 12-bit R-2R DAC

    77 parts2
  • 2 layers55.5 × 70 mmMystat, the printed circuit board in 3D

    Mystat

    genji0306/Opensens

    Opensource Potentiostat

    66 parts1
  • 4 layers130 × 115 mm4ch Strain Gauge Collector, the printed circuit board in 3D

    4ch Strain Gauge Collector

    EERNINUO/4ch-Strain-Gauge-Collector

    4通道应变信号同步采集模块

    308 partsGPL-3.0
  • 2 layers72.4 × 27.3 mmStimulus driver, the printed circuit board in 3D

    Stimulus driver

    flintwinters/electrode

    This repository contains a single INA333/OPA2192/TLC555/LM386M-1 sonifier schematic. The PCB retains its manual footprint placement and has a provisional two-layer signal route with one PGND net and thermal-relief pours…

    48 parts
  • 2 layers80 × 100 mmFlt06, the printed circuit board in 3D

    Flt06

    flukso/flt06

    PCB for testing the Fluksometer

    96 partsMIT

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/OPA2192ID" title="OPA2192ID in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/OPA2192ID.jpg" alt="OPA2192ID" width="1200" height="900">
A picture that opens the part, for a README
[![OPA2192ID](https://pcbkit.io/embed/parts/ti/OPA2192ID.jpg?size=s)](https://pcbkit.io/parts/ti/OPA2192ID)

Questions

Is there a KiCad symbol and footprint for the OPA2192ID?

Yes. The symbol is Operational Amplifiers:Operational Amplifier x2 Type1 [alt] and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA2192ID?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA2192ID datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA2192ID?

JLCPCB lists it as part C110074, with 35,295 in stock; the sellers' links on this page open their listings.

What can replace the OPA2192ID?

Parts like it in the library: the GS8552-SR by Gainsil, the OPA197ID by Texas Instruments, the OPA189ID by Texas Instruments and the OPA182ID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA2192ID?

18 boards in 15 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8