2 layers99.7 × 63.9 mm
NES CN ROM-256-05
emeargt/nes-cnrom
KiCad project for NES-CN-ROM-256-05 cartridge schematic and PCB
17 parts31CC-BY-SA-4.0
2 layers
Jiggler
FltSv/Jiggler- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 21
- Pads
- 64
- Tracks, vias
- 110, 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Jun 2025
- Updated
- 16 Jun 2025
Overview
Jiggler is an open-source printed circuit board by FltSv, from the FltSv/Jiggler repository on GitHub. It is a 2-layer board with 10 parts on 21 nets, routed with 110 tracks and 3 vias.
It is built around the ATTINY13A-PU and 74HC86D. Its parts include 5 ICs, 3 capacitors and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY13A-PU
DIP-8-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH DIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
74HC86D
SO-14-40℃~+125℃ 1.5V~4.2V 20ns@6V,50pF 2V~6V 2uA 4 5.2mA 5.2mA 500mV~1.8V 74HC Series XOR Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates
README
README.mdJiggler
このプロジェクトは、KiCadとMicrochipStudioを使用した電子回路プロジェクトです。
プロジェクト構成
Jiggler/
├── KiCad/ # KiCadプロジェクトファイル
│ ├── Jiggler.kicad_pcb
│ ├── Jiggler.kicad_sch
│ └── Jiggler.kicad_pro
│
├── MicrochipStudio/ # MicrochipStudioプロジェクトファイル
│ ├── main.c
│ └── Jiggler.cproj
│
└── CircuitSimulator.txt # Circuit Simulator用のシミュレーションファイル開発環境
- KiCad 7.0
- Microchip Studio
- Windows 11
セットアップ
-
KiCadプロジェクトの開き方
- KiCadを起動
KiCad/Jiggler.kicad_proを開く
-
MicrochipStudioプロジェクトの開き方
- Microchip Studioを起動
MicrochipStudio/Jiggler.atslnを開く
-
回路シミュレーションの実行方法
- Circuit Simulatorにアクセス
- File > Open を選択
CircuitSimulator.txtを選択
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | TA7291S/SG | Package_SIP:SIP-9_22.3x3mm_P2.54mm | U3, U4, U5 |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 1000pF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | 74HC86 | Package_DIP:DIP-14_W7.62mm | U6 |
| 1 | ATtiny13A-P | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | ISP_Conn | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
Questions
What parts does the Jiggler use?
10 parts, built around the ATTINY13A-PU and 74HC86D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jiggler KiCad files?
From the FltSv/Jiggler repository on GitHub, at the commit this page was made from: the board is KiCad/Jiggler.kicad_pcb and its schematic KiCad/Jiggler.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jiggler design in my own project?
Its repository states no licence, so its author keeps all rights: ask FltSv before reusing the design.
Similar boards
- 2 layers100 × 61.4 mm
Cart
digilogistist/The-Open-Source-USB-NES-Project
USB-NES and NES-FASTGFX product engineering repository
38 parts24CC0-1.0 - 2 layers100 × 100 mm
- 2 layers22.9 × 30.7 mm
- 4 layers243.8 × 243.8 mm
- 6 layers100.1 × 112 mm
Picones
WiiMake/picones
In the last 40 years, technology has advanced to the point were what used to be done in hardware can now be done in software. This project uses an rp2350 to emulate a ROM chip on an NES Cartridge.
59 parts1 - 2 layers27.9 × 15.2 mm
- 2 layers140 × 60 mm
A277d led tachometer
bazsimarkus/a277d-led-tachometer
An analog LED tachometer controlled by an East German A277D chip (clone of UAA180), featuring an integrated ATtiny13A-based digital ignition pulse generator for testing.
61 parts