
Cutiepie2040 ortho
flamwenco/cutiepie
A funky little 10.5u with dual 1.75u spacebars.

A funky little 10.5u with dual 1.75u spacebars.
Cutiepie2040 is an open-source printed circuit board by flamwenco, from the flamwenco/cutiepie repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 200 × 81 mm with 114 parts on 89 nets, routed with 435 tracks and 47 vias.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 38 diodes, 3 ICs, 2 connectors, 1 switch and 1 crystal. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +22 |
| 34 | MX-NoLED | MX_Only:MXOnly-1U-NoLED | MX1, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX24, MX25 +18 |
| 10 | .1u | Capacitor_SMD:C_0402_1005Metric | C_1V-Decoup2, C_1V-Decoup3, C_3V-Decoup3, C_3V-Decoup4, C_3V-Decoup5, C_3V-Decoup6, C_3V-Decoup7, C_3V-Decoup8, C_3V-Decoup9, C_Flash1 |
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric | C_1V-Decoup1, C_3V-Decoup2, C_LD1, C_LD2 |
| 4 | MX-NoLED | MX_Only:MXOnly-1.25U-NoLED | MX2, MX4, MX12, MX36 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R_Crystal1, R_Flash1, R_RST1 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C_Crystal1, C_Crystal2 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R_DATA1, R_DATA2 |
| 2 | MX-NoLED | MX_Only:MXOnly-1.75U-NoLED | MX19, MX23 |
| 2 | MX-NoLED | MX_Only:MXOnly-2U-ReversedStabilizers-NoLED | MX19, MX23 |
| 2 | MX-NoLED | MX_Only:MXOnly-1.5U-NoLED | MX3, MX35 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C_3V-Decoup1 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | MX-NoLED | MX_Only:MXOnly-ISO-ReversedStabilizers-NoLED | MX35 |
| 1 | MX-NoLED | Other Footprints:MXOnly-4U-ReversedStabilizers-NoLED | MX19 |
| 1 | MX-NoLED | MX_Only:MXOnly-3U-ReversedStabilizers-NoLED | MX23 |
| 1 | RP2040 | cipulot_parts:RP2040-QFN-56 | U1 |
| 1 | Reset | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | SW1 |
| 1 | SM04B | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23 | U3 |

flamwenco/cutiepie
A funky little 10.5u with dual 1.75u spacebars.

flamwenco/cutiepie
A funky little 10.5u with dual 1.75u spacebars.

flamwenco/cutiepie
A funky little 10.5u with dual 1.75u spacebars.

flamwenco/cutiepie
A funky little 10.5u with dual 1.75u spacebars.


shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.


polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.


It measures 200 × 81 mm and has 2 copper layers, 1.6 mm thick.
114 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the flamwenco/cutiepie repository on GitHub, at the commit this page was made from: the board is KiCad Project Files/cutiepie2040.kicad_pcb and its schematic Baconspoon_Hotswap_and_BLE_PCBs/ble-uniform-stagger-hotswap-solder/cutiepie-nRF52840-uniform-stagger-hotswap-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).