

Small Gauge
Open Source replacement for the Mazda Miata Oil Pressure Gauge
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 52
- Pads
- 168
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Oct 2023
- Updated
- 19 Mar 2024
Overview
Small Gauge is an open-source printed circuit board by finenife, from the finenife/Small-Gauge repository on GitHub. It is a 2-layer board with 28 parts on 52 nets.
It is built around the RP2040, W25Q128JVSIQ and ABM8G-12.000MHZ-18-D2Y-T3. Its parts include 17 capacitors, 5 resistors, 3 ICs, 2 connectors and 1 crystal. It belongs with the RP2040 boards of this library.
Main components
3RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHABM8G-12.000MHZ-18-D2Y-T3
SMD3225-4P-40℃~+85℃ 120Ω 12MHz 18pF SMD crystal oscillator ±20ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdSmall Gauge
Open Source replacement for the Mazda Miata Oil Pressure Gauge
some small notes for myself of other repos ill be referencing
-
ill likely move this away from a mono repo at some point
-
Screen - ST77903 - 1.6 Inch TFT Display LCD MODULE Circular Display 400x400 ST77903 Driver Quad-SPI Interface 14Pins https://a.aliexpress.com/_mM0T8uA
-
LVGL - https://lvgl.io/
-
ESP-IDF CAN (TWAI) Library documentation https://docs.espressif.com/projects/esp-idf/en/stable/esp32s2/api-reference/peripherals/twai.html
-
RejsaCAN-ESP32 https://github.com/MagnusThome/RejsaCAN-ESP32
-
ST77903 ESP Library https://github.com/moononournation/Arduino_GFX/issues/395
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Resistor_SMD:R_0201_0603Metric | C10, C11, C12, C13, C14, C15, C16 |
| 3 | 100nF | Resistor_SMD:R_0201_0603Metric | C3, C7, C8 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R3 |
| 2 | 1u | Capacitor_SMD:C_0201_0603Metric | C6, C9 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 27p | Capacitor_SMD:C_0201_0603Metric | C4, C5 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C17 |
| 1 | ABM8G-12.000MHZ-18-D2Y-T3 | Mouser:ABM8G | Y1 |
| 1 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | DNF | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R2 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | USB_B_Micro | Mouser:USB_MICRO_B_1051640001 | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
Similar boards
- 2 layers42 × 67 mm

- 2 layers181 × 97 mm

OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm

- 4 layers102.9 × 96.7 mm

PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm

Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm

Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers78 × 60 mm

- 2 layers44 × 44 mm

Questions
What parts does the Small Gauge use?
28 parts, built around the RP2040, W25Q128JVSIQ and ABM8G-12.000MHZ-18-D2Y-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Small Gauge KiCad files?
From the finenife/Small-Gauge repository on GitHub, at the commit this page was made from: the board is PCB Files/Small Gauge/Small_Gauge/Small_Gauge.kicad_pcb and its schematic PCB Files/Small Gauge/Small_Gauge/Small_Gauge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Small Gauge design in my own project?
Its repository states no licence, so its author keeps all rights: ask finenife before reusing the design.