2 layers217.3 × 393.8 mm
2 layers217.3 × 393.8 mm
Sweepv2 custom
filterpaper/split_pcbs9Open source split PCB mods
- Size
- 217.3 × 393.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 43
- Pads
- 311
- Tracks, vias
- 693, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Sep 2021
- Updated
- 25 Aug 2022
Overview
Sweepv2 custom is an open-source printed circuit board by filterpaper, from the filterpaper/split_pcbs repository on GitHub. It is a 2-layer board of 217.3 × 393.8 mm with 44 parts on 43 nets, routed with 693 tracks and 9 vias.
Its parts include 34 switches, 2 ICs and 2 connectors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
Architeuthis dux/README.mdSimplified Architeuthis dux
Simplified versions of tapioki's Architeuthis dux with hotswap socket and puck support removed, fixed phantom drill holes
Instructions
To build an Architeuthis dux, you need the following:
- 2 pro-micro controllers (Elite-C or Pro-micro C)
- 2 PJ320A audio jack
- 1 male-to-male TRRS cable
- 34 Kailh choc v1 switches and keycaps
- Rubber feet or bumbers for the bottom
- Optional: low profile socket with Mill-max pins, or budget socket pins with round pin headers
Note: Architeuthis dux is a double sided PCB so controllers face down on the left and face up on the right.
QMK Firmware
To build the QMK firmware, run:
qmk compile -kb a_dux -km defaultParts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | SW_Push | Kailh:SW_PG1350_nonrev_DPB | SW2, SW11, SW11_r1, SW12, SW12_r1, SW13_r1, SW14, SW15, SW15_r1, SW16, SW16_r1, SW17, SW17_r1, SW18, SW18_r1, SW20 +17 |
| 2 | AudioJack4dpb | Kailh:TRRS-PJ-320A | J1, J2 |
| 2 | ProMicro-kbd | kbd:ProMicro_v3 | U1, U2 |
| 2 | SW_Push | kbd:SW_SPST_B3U-1000P | RSW1, RSW2 |
| 2 | VAL** | kbd:mouse-bite-2mm-slot-with-space-for-track | mouse-bite-2mm-slot, mouse-bite-2mm-slot |
| 1 | SW_Push | Kailh:SW_PG1350_rev_DPB | SW10 |
The 42 most common of 44 parts.
Questions
How big is the Sweepv2 custom PCB?
It measures 217.3 × 393.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sweepv2 custom use?
44 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sweepv2 custom KiCad files?
From the filterpaper/split_pcbs repository on GitHub, at the commit this page was made from: the board is Sweep/archive/sweepv2_custom.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sweepv2 custom design in my own project?
Its repository states no licence, so its author keeps all rights: ask filterpaper before reusing the design.
More from filterpaper/split_pcbs
12- 2 layers238.2 × 206.5 mm
- 2 layers217.4 × 393.8 mm
- 2 layers238.2 × 206.5 mm
- 2 layers229.5 × 95.1 mm
- 2 layers217.4 × 86.8 mm
- 2 layers17.8 × 31.9 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
- 2 layers108.6 × 393.8 mm
Similar boards
- 2 layers78 × 60 mm
- 2 layers115 × 14.5 mm
- 2 layers37.7 × 20 mm
- 2 layers88.9 × 88.4 mm
- 2 layers125 × 98 mm
3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
44 parts258 - 2 layers65 × 56.5 mm
RPiG3iMac
qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino
44 parts240LGPL-3.0 - 2 layers54.4 × 49.3 mm
Fx3 tn20k adapter
Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
44 parts236CC-BY-4.0 - 2 layers250 × 32 mm
