2 layers217.3 × 393.8 mm
2 layers108.6 × 393.8 mm
Half swept custom
filterpaper/split_pcbs9Open source split PCB mods
- Size
- 108.6 × 393.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 23
- Pads
- 194
- Tracks, vias
- 573, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Sep 2021
- Updated
- 25 Aug 2022
Overview
Half swept custom is an open-source printed circuit board by filterpaper, from the filterpaper/split_pcbs repository on GitHub. It is a 2-layer board of 108.6 × 393.8 mm with 22 parts on 23 nets, routed with 573 tracks and 20 vias.
Its parts include 17 switches, 1 IC and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
Architeuthis dux/README.mdSimplified Architeuthis dux
Simplified versions of tapioki's Architeuthis dux with hotswap socket and puck support removed, fixed phantom drill holes
Instructions
To build an Architeuthis dux, you need the following:
- 2 pro-micro controllers (Elite-C or Pro-micro C)
- 2 PJ320A audio jack
- 1 male-to-male TRRS cable
- 34 Kailh choc v1 switches and keycaps
- Rubber feet or bumbers for the bottom
- Optional: low profile socket with Mill-max pins, or budget socket pins with round pin headers
Note: Architeuthis dux is a double sided PCB so controllers face down on the left and face up on the right.
QMK Firmware
To build the QMK firmware, run:
qmk compile -kb a_dux -km defaultParts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | SW_Push | Kailh:SW_PG1350_rev_DPB | SW2, SW3, SW4, SW5, SW6, SW8, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW20, SW21 +1 |
| 1 | |||
| 1 | AudioJack4dpb | Kailh:TRRS-PJ-DPB2 | J2 |
| 1 | ProMicro-kbd | kbd:ProMicro_v2 | U1 |
The 20 most common of 22 parts.
Questions
How big is the Half swept custom PCB?
It measures 108.6 × 393.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Half swept custom use?
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Half swept custom KiCad files?
From the filterpaper/split_pcbs repository on GitHub, at the commit this page was made from: the board is Sweep/archive/half-swept_custom.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Half swept custom design in my own project?
Its repository states no licence, so its author keeps all rights: ask filterpaper before reusing the design.
More from filterpaper/split_pcbs
12- 2 layers238.2 × 206.5 mm
- 2 layers217.4 × 393.8 mm
- 2 layers217.3 × 393.8 mm
- 2 layers238.2 × 206.5 mm
- 2 layers229.5 × 95.1 mm
- 2 layers217.4 × 86.8 mm
- 2 layers17.8 × 31.9 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
Similar boards
- 2 layers158 × 11 mm
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
22 parts1.1kGPL-3.0 - 2 layers57 × 65 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
22 parts1kGPL-3.0 - 2 layers81 × 57.2 mm
RP2040-Macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
22 parts915 - 2 layers54.6 × 70.9 mm
BeagleLogic Cape
abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.
22 parts479GPL-3.0 - 2 layers66.4 × 24.5 mm
Connecting piece
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
22 parts456 - 2 layers51 × 70 mm
- 2 layers19.7 × 19.7 mm
- 2 layers27.8 × 16 mm
Spi 1v8 level shifter
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
22 parts253GPL-3.0