2 layers217.3 × 393.8 mm
2 layers119.6 × 206.5 mm
Hypergolicv1 left
filterpaper/split_pcbs9Open source split PCB mods
- Size
- 119.6 × 206.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 24
- Pads
- 173
- Tracks, vias
- 312, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Sep 2021
- Updated
- 25 Aug 2022
Overview
Hypergolicv1 left is an open-source printed circuit board by filterpaper, from the filterpaper/split_pcbs repository on GitHub. It is a 2-layer board of 119.6 × 206.5 mm with 27 parts on 24 nets, routed with 312 tracks and 3 vias.
Its parts include 17 switches and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
Architeuthis dux/README.mdSimplified Architeuthis dux
Simplified versions of tapioki's Architeuthis dux with hotswap socket and puck support removed, fixed phantom drill holes
Instructions
To build an Architeuthis dux, you need the following:
- 2 pro-micro controllers (Elite-C or Pro-micro C)
- 2 PJ320A audio jack
- 1 male-to-male TRRS cable
- 34 Kailh choc v1 switches and keycaps
- Rubber feet or bumbers for the bottom
- Optional: low profile socket with Mill-max pins, or budget socket pins with round pin headers
Note: Architeuthis dux is a double sided PCB so controllers face down on the left and face up on the right.
QMK Firmware
To build the QMK firmware, run:
qmk compile -kb a_dux -km defaultParts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | SW_Push | Kailh:SW_PG1350_rev_DPB | SW2, SW3, SW4, SW5, SW6, SW8, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW20, SW21 +1 |
| 2 | , | ||
| 2 | MountingHole_Pad | kbd:1pin_conn | GND, GND |
| 2 | Val** | kbd:1pin_conn | , |
| 1 | ProMicro-kbd | kbd:ProMicro_DPB | U1 |
| 1 | SW_SPDT | Kailh:SPDT_C128955 | SW |
The 25 most common of 27 parts.
More from filterpaper/split_pcbs
12- 2 layers238.2 × 206.5 mm
- 2 layers217.4 × 393.8 mm
- 2 layers217.3 × 393.8 mm
- 2 layers238.2 × 206.5 mm
- 2 layers229.5 × 95.1 mm
- 2 layers217.4 × 86.8 mm
- 2 layers17.8 × 31.9 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
- 2 layers108.6 × 393.8 mm
Similar boards
- 2 layers47.6 × 27.3 mm
- 2 layers77.4 × 77.4 mm
CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm
- 2 layers40 × 40 mm
- 2 layers22 × 42 mm
Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm
PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm
AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm
Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223
Questions
How big is the Hypergolicv1 left PCB?
It measures 119.6 × 206.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hypergolicv1 left use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hypergolicv1 left KiCad files?
From the filterpaper/split_pcbs repository on GitHub, at the commit this page was made from: the board is hypergolic V1.2 bm/hypergolicv1_left.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hypergolicv1 left design in my own project?
Its repository states no licence, so its author keeps all rights: ask filterpaper before reusing the design.