2 layers217.3 × 393.8 mm
2 layers117.2 × 86.1 mm
Splinter right
filterpaper/split_pcbs9Open source split PCB mods
- Size
- 117.2 × 86.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 22
- Pads
- 136
- Tracks, vias
- 316, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 20 Sep 2021
- Updated
- 25 Aug 2022
Overview
Splinter right is an open-source printed circuit board by filterpaper, from the filterpaper/split_pcbs repository on GitHub. It is a 2-layer board of 117.2 × 86.1 mm with 19 parts on 22 nets, routed with 316 tracks and 0 vias.
Its parts include 17 switches and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
Architeuthis dux/README.mdSimplified Architeuthis dux
Simplified versions of tapioki's Architeuthis dux with hotswap socket and puck support removed, fixed phantom drill holes
Instructions
To build an Architeuthis dux, you need the following:
- 2 pro-micro controllers (Elite-C or Pro-micro C)
- 2 PJ320A audio jack
- 1 male-to-male TRRS cable
- 34 Kailh choc v1 switches and keycaps
- Rubber feet or bumbers for the bottom
- Optional: low profile socket with Mill-max pins, or budget socket pins with round pin headers
Note: Architeuthis dux is a double sided PCB so controllers face down on the left and face up on the right.
QMK Firmware
To build the QMK firmware, run:
qmk compile -kb a_dux -km defaultParts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | SW_Push | Kailh:SW_PG1350_rev_DPB2 | SW3, SW4, SW5, SW6, SW8, SW8, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW20, SW21 +1 |
| 1 | ProMicro-kbd | kbd:ProMicro_v3_min_dual | U1 |
| 1 | TRRS | Kailh:TRRS-PJ-DPB2 | Jack0 |
Questions
How big is the Splinter right PCB?
It measures 117.2 × 86.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Splinter right use?
19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Splinter right KiCad files?
From the filterpaper/split_pcbs repository on GitHub, at the commit this page was made from: the board is splinter/splinter_right.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Splinter right design in my own project?
Its repository states no licence, so its author keeps all rights: ask filterpaper before reusing the design.
More from filterpaper/split_pcbs
12- 2 layers238.2 × 206.5 mm
- 2 layers217.4 × 393.8 mm
- 2 layers217.3 × 393.8 mm
- 2 layers238.2 × 206.5 mm
- 2 layers229.5 × 95.1 mm
- 2 layers217.4 × 86.8 mm
- 2 layers17.8 × 31.9 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
Similar boards
- 2 layers43.9 × 27.7 mm
- 2 layers50 × 60 mm
Debate Device
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
19 parts915 - 2 layers102.9 × 96.7 mm
ISA adapter
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
19 parts805 - 2 layers60 × 39 mm
- 2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers80 × 80 mm
- 2 layers25.4 × 25.4 mm
Ina169
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
19 parts282 - 2 layers58.4 × 28.6 mm
New rele
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
19 parts269