
FSR Bed Sensor
fhb/FSR-bed-sensor-Lolin-ESP32-C3
FSR Sensor using an Lolin ESP32-C3 pico (pin compatible to Login ESP32-C3 mini)

FSR Sensor using an Lolin ESP32-C3 pico (pin compatible to Login ESP32-C3 mini)
FSR Bed Sensor potentiometer is an open-source printed circuit board by fhb, from the fhb/FSR-bed-sensor-Lolin-ESP32-C3 repository on GitHub. It is a 2-layer board of 25.4 × 25.4 mm with 8 parts on 12 nets, routed with 45 tracks and 0 vias.
It is built around the ESP32-C3. It belongs with the sensors and measurement boards and the ESP32 and RISC-V boards of this library.
This project includes everything needed to build a bed occupancy sensor inspired by https://community.home-assistant.io/t/fsr-the-best-bed-occupancy-sensor/365795: One PCB design for connecting two FSR sensors to an Lolin ESP32-C3 pico (pin compatible to Lolin ESP32-C3 mini) and a case for it. There are also two options to add a temperature sensor using the I2c port on the Lolin ESP32-C3. Everything has been tested and works. Make sure the JST-XH plugs are properly plugged in.
List of materials:

Option 1:The Wemos SHT-30 is the easiest option as ready made SH1.0 4Pin cables are available, that's the option I ended up using and designing a case for.
Option 2: You could also make your own JST-XH to JST-SH1.0 cable and solder a JST-XH connector to a BME280 5V Board.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Potentiometer_ACP_CA6-H2,5_Horizontal | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | R1(A0), R2(A3) |
| 1 | BME280 5V | Custom Footprints:BME280 5V | BME280 T&H1 |
| 1 | ESP32-C3 | Module:WEMOS_Lolin_ESP32-C3_Pico | Wemos LOLIN C3 Pico |
| 1 | JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | FSR2 |
| 1 | ST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | FSR1 |
The 6 most common of 8 parts.

fhb/FSR-bed-sensor-Lolin-ESP32-C3
FSR Sensor using an Lolin ESP32-C3 pico (pin compatible to Login ESP32-C3 mini)

fhb/FSR-bed-sensor-Lolin-ESP32-C3
FSR Sensor using an Lolin ESP32-C3 pico (pin compatible to Login ESP32-C3 mini)


G-Pereira/greenmobi-bms
A VESC compatible battery management system

OpenDrone-hw/OpenAIO
Open-source AIO for 2-6S toothpick quads: flight controller, 4-in-1 AM32 ESC and ExpressLRS receiver, 25.5x25.5 mm.





It measures 25.4 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
8 parts, built around the ESP32-C3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fhb/FSR-bed-sensor-Lolin-ESP32-C3 repository on GitHub, at the commit this page was made from: the board is PCB/FSR Bed Sensor_potentiometer.kicad_pcb and its schematic PCB/V2/FSR Bed Sensor V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask fhb before reusing the design.