

SensorPCB
Limpia vidrios para materiales
- Size
- 88.9 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 48
- Pads
- 101
- Tracks, vias
- 197, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Oct 2024
- Updated
- 2 Dec 2024
Overview
SensorPCB is an open-source printed circuit board by fgutep, from the fgutep/limpiaVidrios repository on GitHub, published under the MIT licence. It is a 2-layer board of 88.9 × 101.6 mm with 17 parts on 48 nets, routed with 197 tracks and 0 vias.
It is built around the ESP32-S3-DEVKITC-1-N8R2. Its parts include 15 connectors and 2 ICs. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdlimpiaVidrios
Limpia vidrios para materiales
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Screw_Terminal_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J14, J15 |
| 1 | 5VIN | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J12 |
| 1 | 5VRail | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | 7.4VIN | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J9 |
| 1 | ACC_MPU6050 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | AVAILABLE I2C | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | COLOR | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J8 |
| 1 | ESP32-S3-DEVKITC-1-N8R2 | ESP32-S3:ESP32-S3-DEVKITC-1-N8R2 | U1 |
| 1 | MOTORA | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J10 |
| 1 | MOTORB | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J11 |
| 1 | NEOPIXEL | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J6 |
| 1 | OLED | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | VoltSens | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J7 |
| 1 | ~ | DRV:DRV8833 | U2 |
More from fgutep/limpiaVidrios
1- 2 layers55.5 × 44 mm

Similar boards
- 4 layers135 × 84 mm

Stepper with TMC2209 controller board V1
JasonHEngineering/DIY-Robot-Arm-V3
1) Along with using with TMC2209 motor drivers, I have removed R8, R15, R16, R17, R18, R19 because the R value was accidentally too high. I have shorted R8, R16, R17, and left open R15, R18, R19.
95 parts2 - 2 layers200 × 130 mm

Esp32s3 wmlta
riezky-gitH/SIMPAS-BOILER
> 📖 Guidebook proyek — tautan guidebook baru akan ditambahkan di sini.
129 parts2MIT - 2 layers91.5 × 90.5 mm

Project Kratos- W2 Q2 -ESP32-S3 Devkit Breakout Board
arkadasgupta07/ProjectKratos
Arka Dasgupta BITS Pilani, K. K. Birla Goa Campus Aspiring to develop rovers by engineering their electronics, controls and automation subsystems.
26 parts1 - 2 layers100 × 50 mm

- 4 layers100 × 79 mm

ESP32 Interface
dennowiggle/ESP32_Interface
Facilitate learning the Z80 Retro! hardware and software.
114 parts1LGPL-2.1 - 2 layers85.4 × 100 mm

- 2 layers126.2 × 143.6 mm

Sciencepcb
Sidbit08/ABEX_PCB_v1
A custom ESP32-S3-based PCB designed in KiCad for automated soil sample analysis, featuring drivers and interfaces for environmental sensors, peristaltic pumps, and auger drilling actuators.
100 parts1 - 2 layers102 × 45 mm

HELPStat V2
stevfu/eis_capstone
Utilization of Electrochemical Impedance Spectroscopy for the Detection of Drugs
51 parts1MIT
Questions
How big is the SensorPCB PCB?
It measures 88.9 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SensorPCB use?
17 parts, built around the ESP32-S3-DEVKITC-1-N8R2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SensorPCB KiCad files?
From the fgutep/limpiaVidrios repository on GitHub, at the commit this page was made from: the board is PCBs/SensorPCBb/SensorPCB/SensorPCB.kicad_pcb and its schematic PCBs/Battery/batteryPCBa/batteryPCBa.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SensorPCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).