4 layers50 × 60 mm
PiCCANTE OBD Dongle
Alia5/PiCCANTE
PiCCANTE is a powerful tool for exploring and reversing CAN busses of vehicles, based on Raspberry Pi Pico (any model)
35 parts104GPL-3.0
2 layers65.5 × 56.5 mm
Tko rpi hat
feverscreen/tko-rpi-hat- Size
- 65.5 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 58
- Pads
- 171
- Tracks, vias
- 171, 10
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Jul 2020
- Updated
- 11 Nov 2020
Overview
Tko rpi hat is an open-source printed circuit board by feverscreen, from the feverscreen/tko-rpi-hat repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65.5 × 56.5 mm with 39 parts on 58 nets, routed with 171 tracks and 10 vias.
It is built around the TPS5430DDA and B340A. Its parts include 11 resistors, 6 capacitors, 6 connectors, 3 diodes and 2 ICs.
Main components
2
TPS5430DDA
ESOP-8-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
B340A
SMA(DO-214AC)-55℃~+150℃ 1 Independent 3A 40V 500mV@3A 500uA@40V 80A SMA(DO-214AC) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdtko-rpi-hat
Raspberry Pi hat for the Te Kahu Ora cameras.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100K | Resistor_SMD:R_0603_1608Metric | R1, R2, R8, R9, R10, R11 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_Pad | H1, H2, H3, H4 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5, C7 |
| 2 | 470R | Resistor_SMD:R_0603_1608Metric | R3, R5 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 15uH | footprints:MWSA1004-150MT | L1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 220uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C10 |
| 1 | 36K | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 3K16 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | B340A | Diode_SMD:D_SMA | D1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J6 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | Conn_01x04 | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J5 |
| 1 | D_Zener | Diode_SMD:D_SMA | D2 |
| 1 | Fuse | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F1 |
| 1 | LED | Diode_SMD:D_0603_1608Metric | D3 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Q_PMOS_GDS | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | TPS2546RTER | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm_ThermalVias | IC1 |
| 1 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U1 |
| 1 | Thermal Camera | footprints:8-pin-plug | J2 |
| 1 | USB_A | Connector_USB:USB_A_CONNFLY_DS1095-WNR0 | J4 |
Questions
How big is the Tko rpi hat PCB?
It measures 65.5 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tko rpi hat use?
39 parts, built around the TPS5430DDA and B340A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tko rpi hat KiCad files?
From the feverscreen/tko-rpi-hat repository on GitHub, at the commit this page was made from: the board is tko-rpi-hat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tko rpi hat design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers105.2 × 71.1 mm
Onyx PCB
CuriousMotor/Onyx-Stepper-Motherboard
The successor of the iconic Arduino-CNC-shield
96 parts56MIT - 2 layers75.8 × 92.5 mm
ESP32 STEPPER CONTROL PCB
JohnDecebal/UNDR
UNDR AUTO is a fully automatic WDT (Weiss Distribution Technique) tool designed for espresso enthusiasts. This open-source DIY project combines 3D printed parts with electronic and mechanical components to create a…
48 parts46 - 2 layers85 × 56 mm
Orange juice board
jeji/orange_juice
A orange pi zero shield board for 3D printer with klipper features
56 parts13GPL-3.0 - 2 layers99 × 56 mm
Orange juice board
jeji/orange_juice_2
For Orange Pi zero 2 with klipper and more advance feature
56 parts5 - 4 layers70 × 76 mm
- 2 layers83.4 × 58 mm
- 4 layers60.2 × 60.5 mm
ESP32 FlightController
durveshpathak1989/kicad-local-agent
Free local Ollama agent for generating and validating KiCad project files
73 partsMIT