Skip to the content
4 layers220 × 59 mmSteno, the printed circuit board in 3D

Custom RP2040 based split stenography keyboard.

Size
220 × 59 mm
Copper layers
4
Thickness
1.6 mm
Parts
85
Nets
81
Pads
403
Tracks, vias
532, 104
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
1 May 2026
Updated
14 Jun 2026

Overview

Steno is an open-source printed circuit board by fernd4wg, from the fernd4wg/steno repository on GitHub. It is a 4-layer board of 220 × 59 mm with 85 parts on 81 nets, routed with 532 tracks and 104 vias.

It is built around the RP2040, W25Q16JVSSIQ and AMS1117-3.3. Its parts include 26 diodes, 24 switches, 16 capacitors, 8 resistors and 3 ICs. It belongs with the RP2040 boards of this library.

Main components

3

Parts

85
QtyValueFootprintReferences
241N914Diode_SMD:D_SOD-123D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +8
24KeyswitchScottoKeebs_Hotswap:Hotswap_Choc_V1V2_1.00uS1_S1, S10_*1, S11_F1, S12_P1, S13_L1, S14_T1, S15_D1, S16_R1, S17_B1, S18_G1, S19_S1, S20_Z1, S21_O1, S22_A1, S23_E1, S24_U1 +8
10100nCapacitor_SMD:C_0402_1005MetricC1, C2, C9, C11, C12, C13, C14, C15, C16, C17
31k OhmsResistor_SMD:R_0402_1005MetricR1, R6, R7
210pCapacitor_SMD:C_0402_1005MetricC7, C8
210uCapacitor_SMD:C_0603_1608MetricC3, C5
21uCapacitor_SMD:C_0603_1608MetricC18, C19
227 OhmResistor_SMD:R_0402_1005MetricR4, R5
25.1K OhmResistor_SMD:R_0402_1005MetricR2, R3
2SW_Push3rd_party_footprints:SW4_PTS815 SJM 250 SMTR LFS_CNKBOOTSEL1, RST1
1120 OhmResistor_SMD:R_0402_1005MetricR8
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1Crystal_GND24Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1DDiode_SMD:D_SMAD1
1LEDLED_SMD:LED_0402_1005MetricLED1
1RP2040Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mmU3
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01AJ2
1W25Q16JVSSPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU1

The 81 most common of 85 parts.

Similar boards

  • 2 layers61.9 × 76.2 mmDigits pcb, the printed circuit board in 3D

    Digits pcb

    justinlindh/digits

    Encrypted retro phone network — private VoIP over vintage desk phones

    77 parts4AGPL-3.0
  • 2 layers54 × 25 mmRP2040 Template, the printed circuit board in 3D

    RP2040 Template

    elral/PCB_RP2040_Template

    This KiCad template contains a base RP2040 schematic and PCB layout. To use this template go to File > New Project From Template..., switch to the User Templates tab, then click the folder icon and navigate to this…

    34 parts2
  • 2 layers99.1 × 61 mmHuge Stepper Driver, the printed circuit board in 3D

    Huge Stepper Driver

    lisasnt/HSD-RP2040-5-stepper-motor-driver

    Custom PCB with RP2040 and Stepper Drivers

    105 parts1
  • 2 layers185 × 83 mmMass Spring Damper SysID Lab, the printed circuit board in 3D

    Mass Spring Damper SysID Lab

    Scalable-Open-Source-Labs/Mass-Spring-Damper-SysID-Lab

    An open source Mass-Spring-Damper to assist with teaching System Identification

    135 parts1MIT
  • 4 layers68 × 75 mmDeltaRhoRobot, the printed circuit board in 3D

    DeltaRhoRobot

    valleyquail/DeltaRhoPCB

    PCB files for the robot

    119 parts1
  • 4 layers99 × 84 mmRobotic arm controller, the printed circuit board in 3D

    Robotic arm controller

    bejaouihamza/robotic_arm_controller

    Traditional servo controllers simply send PWM signals. This board goes further:

    140 parts
  • 4 layers65 × 30 mmAnorith, the printed circuit board in 3D

    Anorith

    dialgorithm/anorith

    a minimal rp2040 dev board with usb-c and onboard qspi flash.

    45 parts
  • 2 layers31 × 18 mmRP2040Micro, the printed circuit board in 3D

    RP2040Micro

    elral/PCB_RP2040Micro

    This Repo is deprecated. No further develpment will take place.

    39 parts

Questions

How big is the Steno PCB?

It measures 220 × 59 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Steno use?

85 parts, built around the RP2040, W25Q16JVSSIQ and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Steno KiCad files?

From the fernd4wg/steno repository on GitHub, at the commit this page was made from: the board is steno.kicad_pcb and its schematic key_layout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Steno design in my own project?

Its repository states no licence, so its author keeps all rights: ask fernd4wg before reusing the design.