

Wetterstation
This is a small fun project: a temperature sensor running only on solar energy, without a battery. It contains code for the ESP8266 to connect to an MQTT server, publish its temperature, and then go into deep sleep for…
- Size
- 64.3 × 34.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 41
- Pads
- 132
- Tracks, vias
- 189, 24
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Sep 2025
- Updated
- 30 Oct 2026
Overview
Wetterstation is an open-source printed circuit board by FabianAster, from the FabianAster/wetterstation repository on GitHub. It is a 2-layer board of 64.3 × 34.3 mm with 35 parts on 41 nets, routed with 189 tracks and 24 vias.
It is built around the ESP-12F, BME280 and BQ25505RGRT. Its parts include 15 resistors, 9 capacitors, 6 connectors, 4 ICs and 1 inductor. It belongs with the power boards and the ESP8266 boards of this library.
Main components
3ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi ModulesBME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity SensorBQ25505RGRT
VQFN-20-EP(3.5x3.5)VQFN-20-EP(3.5x3.5) Power Management - Specialized ROHSTexas InstrumentsPower Management - Specialized
README
README.mdSolar Powered Temperatur Sensor with Super Capacitor

This is a small fun project: a temperature sensor running only on solar energy, without a battery. It contains code for the ESP8266 to connect to an MQTT server, publish its temperature, and then go into deep sleep for 10 seconds. The Python script captures the readings and stores them in a database. For charging, it uses a BQ25505 MPPT charger.

Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R5, R11, R12 |
| 3 | Conn_01x02_Pin | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1, J2, J3 |
| 2 | 0 | Resistor_SMD:R_1206_3216Metric | R13, R14 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric | C6, C8 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 4.7k | Resistor_SMD:R_1206_3216Metric | R15, R16 |
| 2 | 4.7uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C5, C7 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 3.17M | Resistor_SMD:R_1206_3216Metric | R7 |
| 1 | 4.76M | Resistor_SMD:R_1206_3216Metric | R9 |
| 1 | 5.07M | Resistor_SMD:R_1206_3216Metric | R8 |
| 1 | 5.61M Ohm (min, if larger voltage drops) | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 7.32M (better smaller) | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | BQ25505RGRT | bqMPPT:QFN50P350X350X100-21N | U2 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C9 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_NV_B02P-NV_1x02_P5.00mm_Vertical | J7 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | Conn_01x06_Pin | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J4 |
| 1 | ESP-12F | RF_Module:ESP-12E | U1 |
| 1 | L | Inductor_SMD:L_Abracon_ASPI-0425 | L1 |
| 1 | TPS7A20xxxDQN | Package_SON:Texas_X2SON-4_1x1mm_P0.65mm | U3 |
Similar boards
- 2 layers66 × 21.5 mm

- 4 layers128 × 184 mm

Cosmicpi 1.7
CosmicPi/CosmicPiV1.7PCB
PCB for Version 1.7 of the Cosmic Pi Hardware. Incremental changes from V1.6. This design is licensed under the CERN OHL V1.2
219 parts14 - 2 layers54.9 × 95 mm

Board v5
brev-dev/another_esp8266_sensor_board
PCB layout and instructions for a multi-purpose esp8266 sensor device, with optional LORA connectivity.
86 parts5GPL-3.0 - 2 layers24 × 57.8 mm

Weather station
mec-kon/weather_station
A simple weather station hardware (pcb files) for recording temperature, humidity, pressure and airquality.
73 parts3GPL-3.0 - 4 layers52.7 × 47.6 mm

Esp8266 atmosphere sensor
abzman/esp-IoT-boards
R5v: 1.9K for the red LED, 3.9K for the blue LED
62 parts9Unlicense - 2 layers55 × 82.7 mm

- 2 layers51.4 × 61 mm

- 2 layers50 × 38 mm

Questions
How big is the Wetterstation PCB?
It measures 64.3 × 34.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wetterstation use?
35 parts, built around the ESP-12F, BME280 and BQ25505RGRT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wetterstation KiCad files?
From the FabianAster/wetterstation repository on GitHub, at the commit this page was made from: the board is PCB/wetterstation.kicad_pcb and its schematic PCB/wetterstation-backups/wetterstation-2025-07-14_210752/wetterstation.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wetterstation design in my own project?
Its repository states no licence, so its author keeps all rights: ask FabianAster before reusing the design.