
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

Macropad with ISO Enter and RGB LEDs for funzies
ISO13715 is an open-source printed circuit board by exen904, from the exen904/ISO13715-PCB repository on GitHub. It is a 2-layer board of 123.8 × 67.9 mm with 39 parts on 32 nets, routed with 193 tracks and 7 vias.
It is built around the 1N4148W and SK6812MINI-E. Its parts include 18 diodes, 18 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.

Name derives from DIN ISO 13715 Kanten mit unbestimmter Gestalt. Depending on the layout you choose for the bottom row 13/15 keys, 7 where the regular Alpha cluster would be and ISO should be obvious.
Huge shoutout to PCBway, who sponsored the run of the matte black PCB I used in the build guide. No strings attached here, if you want a matte black PCB, thats the way to go.
You can find the Gerber files for ordering your own PCB in the PCB\production folder. For service I can absolutely recommend PCBway, who as mentioned above, sponsored my prototype run. Service was great and they deliver quality work, so I can really recommend them.

For the MCU you have two options. Either XIAO RP2040, or Waveshare RP2040 Zero/0xCB Gemini. Both fit and work, however the pinout is mirrored on either option. I originally designed the PCB for the Xiao, with the MCU facing towards you (not like most split builds with face down MCUs). However, my Proto is built with a RP2040 zero, which has to be flipped on its face. I recommend using IC sockets for the MCU.
The current case only supports the HHKB bottom row with 2x 1U keys, the version with the larger blockers is still on my todo. If you cant wait though, feel free to edit the STEP files to your needs. For the diffusor, I chose transparent PETG and for a more unified look, changed the last layer to white. The mounting system of the case itself is inspired from the awesome cases from Bubbleology and uses the same magnets.
For printing, I recommend 0.2mm layer height, anything around 10% infill. How tight the plate works for you also depends on the swichtes you choose, if its too loose you can play around with the XY Hole compensation in your slicer.
I started with a very basic KMK firmware based of POG to test everything, which is still included here in the Repo. However, now I also finished the QMK-VIAL port for the board. I only tested this on a 0xCB Gemini, not on a Xiao RP2040. As the Xiao exposes different pins, those need to be changed before compiling the firmware. I currently dont have one on hand to test, so Im not going to provide untested firmware files. Please adjust here for yourself.
If you are using a Helios/RP2040 Zero, you can use the provided iso13715_vial_gemini.uf2 in the Firmware folder. The VIAL firmware also has bootmagic enabled, so to get into bootloader mode, you just need to hold down the imaginary ESC key on the board.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15 |
| 13 | ~ | PCM_marbastlib-mx:SW_MX_1u_3D | SW2, SW3, SW4, SW5, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15 |
| 3 | SK6812MINI-E | PCM_marbastlib-various:LED_6028R | LED1, LED2, LED3 |
| 2 | ~ | PCM_marbastlib-mx:SW_MX_1.25u | SW17, SW18 |
| 2 | ~ | PCM_marbastlib-mx:SW_MX_1u | SW1, SW6 |
| 1 | Seeeduino Xiao rp2040 | PCM_marbastlib-xp-promicroish:Xiao_rp2040_AH_Pogo | U1 |
| 1 | ~ | PCM_marbastlib-mx:SW_MX_1.75u_STP_1.25 | SW20 |
The 37 most common of 39 parts.

sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…


sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!

sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072

Bastardkb/Charybdis-EC11
EC11 PCB to be used in place of the trackball in the Charybdis keyboard.



WillACosta/wlfkbd
The WLF is a 40-key split keyboard (20 keys per half) with a column-staggered matrix and a splayed thumb cluster.
It measures 123.8 × 67.9 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the 1N4148W and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the exen904/ISO13715-PCB repository on GitHub, at the commit this page was made from: the board is PCB/ISO13715.kicad_pcb and its schematic PCB/ISO13715.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask exen904 before reusing the design.