8 layers
Round pendant
sequoia-hope/ultraroute
PCB autorouting experiments around copperroute: route jobs, leaderboards, board morphing
342 parts1MIT
2 layers25.7 × 27.7 mm
Outatime pro
evyd13/outatime-pro12Custom PCB for Casio CA-53W based on Sensor Watch Pro
- Size
- 25.7 × 27.7 mm
- Copper layers
- 2
- Thickness
- 0.6 mm
- Parts
- 56
- Nets
- 105
- Pads
- 290
- Tracks, vias
- 1,255, 125
- Pours
- 258
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 23 Aug 2026
- Updated
- 7 Nov 2026
Overview
Outatime pro is an open-source printed circuit board by evyd13, from the evyd13/outatime-pro repository on GitHub. It is a 2-layer board of 25.7 × 27.7 mm with 56 parts on 105 nets, routed with 1,255 tracks and 125 vias.
It is built around the ALS-PT19-315C/L177/TR8, MAX40200ANS+T and LIS2DW12TR-MS, with the MIC5365-3.3YMT-TZ, PAM8904JPR and USBLC6-2P6 among its other parts. Its parts include 22 capacitors, 9 resistors, 7 ICs, 2 connectors and 1 transistor. It belongs with the SAM D and SAM boards of this library.
Main components
9
ALS-PT19-315C/L177/TR8
0603-40℃~+85℃ 0.6mm 0.8mm 1.7mm 2.5V~5.5V Light Intensity Spectral correction/filtering 0603 Ambient Light Sensors ROHSEverlight ElectronicsAmbient Light SensorsMAX40200ANS+T
BGA-4(0.7x0.7)-40℃~+125℃ 1.5V~5.5V 175mV 6V BGA-4(0.7x0.7) ORing Controllers ROHSMaxim Integrated (Analog Devices)Power Distribution Switches
LIS2DW12TR-MS
LGA-12(2x2)-40℃~+85℃ 1.71V~3.6V 12bit 500nA Accelerometer SPI、I2C X,Y,Z ±16g LGA-12(2x2) Accelerometers ROHSMSKSEMIAccelerometers
MIC5365-3.3YMT-TZ
DFN-4-EP(1x1)-40℃~+125℃@(Tj) 1 150mA 155mV@(150mA) 200uVrms 29uA 3.3V 5.5V 65dB@(1kHz) Fixed Over Current Protection、Thermal Shutdown Positive DFN-4-EP(1x1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyUncategorisedPAM8904JPR
UQFN3030-12UQFN3030-12 Power Management - Specialized ROHSDiodes IncorporatedPower Management - Specialized
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
EVPAWED40
SMD,3x2mm-40℃~+85℃ 0.6mm 15V 20mA 2mm 3.3N 300,000 Cycles 3mm Black IP67 Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,3x2mm Tactile Switches ROHSPanasonicTactile Switches
LTST-C19HE1WT
1.6x1.6mm-20℃~+80℃ 0.35mm 1.6mm 1.6mm 1.8V~2.4V 112mcd~450mcd 130° 2.8V~3.9V 2.8V~3.9V 20mA 20mA 20mA 28mcd~180mcd 45mcd~180mcd 468nm 470nm 520nm 525nm 624nm 632nm 75mW 80mW 80mW Common Anode White Lens SMD-4P,1.6x1.6mm RGB LEDs ROHSLite-OnLight Emitting Diodes (LED)
NCP15XH103F03RC
0402-40℃~+125℃ 0.5mm 100mW 10kΩ 1mW/℃ 1mm 310uA 3380K 3434K 3455K ±1% ±1% 0402 NTC Thermistors ROHSMurataNTC Thermistors
README
README.mdOutatime Pro
A PCB for Casio CA-53W or 3208 module based on the Sensor Watch Pro. It has the same features!
Firmware
Firmware is being worked on here.
WARNING
THIS IS NOT TESTED IN ANY WAY. DO NOT ORDER THIS THINKING IT WILL WORK. FIRMWARE DOESN'T EXIST FOR IT YET. IT IS A WORK IN PROGRESS. However, the PCB design is done.
Version number
Version number is date formate yyMMDD, August 25th 2026 would be v260825.
To-Do
The following still needs work:
- Firmware needs to be finished (work has started!)
- figure out if the selection signals for PAM8904 need to be connected to GPIO or always HIGH.
- PCB needs to be ordered and tested (I intend to do this in a few months time, need to gather funds for a prototype)
- It needs to be worn and loved!!
Bootloader
I contacted devolov, they said to me that the firmware needs to be flashed with utils/flash_watch_pyruler using Adafruit PyRuler or Trinket. (I intend to use Seeed XIAO or maybe Pi Pico.)
Bootloader.h is generated from https://github.com/joeycastillo/uf2-samdx1. (Thanks @devolov!)
LCD
The LCD is fairly simple. It has 35 pins, of which the leftmost is not connected. The first 3 connected pins are common, the rest are segments. Mapping can be found within the emulator svg file or watch_common_display.h. (Seg08 and seg01 are swapped in software to allow blinking)
Thanks to and relevant projects
- Joey Castillo for Sensor Watch, which this project is mostly based on. https://github.com/joeycastillo/Sensor-Watch/tree/main
- Travis Goodspeed, for incredible documentation about the Casio CA-53W. https://github.com/travisgoodspeed/goodwatch
- Vasily Zhuravsky, for a nice USB edge connector library https://github.com/vasya-zh/PCB-Edge-USB-connector-KiCad-library
- Dmitry Teplitsky, for making me think I can do it https://github.com/icelord75/icesio
- Greg Davill, for pointing the way to a microcontroller to use. https://github.com/gregdavill/advent-calendar-of-circuits-2020/tree/main/arm-watch
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C5, C9, C10, C11, C18, C19, C21, C22 |
| 6 | 1uF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C8, C13, C14, C15 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R6, R7, R8 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R9, R11 |
| 2 | 10k 0.1% | Resistor_SMD:R_0402_1005Metric | R3, R5 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C12, C20 |
| 2 | 12.5pF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C16, C17 |
| 2 | MAX40200ANS | Package_BGA:WLP-4_0.728x0.728mm_Layout2x2_P0.35mm | U4, U5 |
| 1 | +3v3 | OutatimePro:TestPoint_Pad_D1.0mm | TP3 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 32.768kHz | OutatimePro:Crystal_SMD_1610-2Pin_1.6x1.0mm | Y1 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 49.9 | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | ALS-PT19-315C/L177/TR8 | OutatimePro:ALS-PT19-315C | Q1 |
| 1 | ATSAML22N18A-CFUT | OutatimePro:UFBGA-100_6.0x6.0mm_Layout11x11_P0.5mm_Ball0.3mm_Pad0.25mm_NSMD | U1 |
| 1 | EVPAWED40 | OutatimePro:Panasonic_EVPAW_EVP6A | SW1 |
| 1 | GND | OutatimePro:TestPoint_Pad_D1.0mm | TP4 |
| 1 | LIS2DW12TR | OutatimePro:LGA-12_2x2mm_P0.5mm | U6 |
| 1 | LOGO | OutatimePro:ghost | G*** |
| 1 | LTST-C19HE1WT | OutatimePro:LED_LiteOn_LTST-C19HE1WT | RGB1 |
| 1 | MIC5365-3.3YMT | Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm | U2 |
| 1 | NCP15XH103F03RC | OutatimePro:TH_0402_1005Metric | TH1 |
| 1 | OSO_SWD | OutatimePro:OSO_SWD_2x3 | J3 |
| 1 | PAM8904JPR | OutatimePro:PAM8904JPR | IC1 |
| 1 | PB01 | OutatimePro:TestPoint_Pad_D1.0mm | TP5 |
| 1 | PB02 | OutatimePro:TestPoint_Pad_D1.0mm | TP6 |
| 1 | USB+ | OutatimePro:TestPoint_Pad_D1.0mm | TP1 |
| 1 | USB- | OutatimePro:TestPoint_Pad_D1.0mm | TP2 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U3 |
| 1 | USB_B_Micro_PCB_Edge_receptacle | Connector_USB_PCB_Edge:USB_Micro-B_PCB_receptacle_5pin_2mm_cutout | J1 |
| 1 | ~ | OutatimePro:ca53board | BRD1 |
| 1 | ~ | OutatimePro:ca53lcd | LCD1 |
| 1 | ~ | OutatimePro:ca53keypad | KPD1 |
Similar boards
- 2 layers11.5 × 6 mm
- 4 layers20.6 × 15.6 mm
- 6 layers36.8 × 16.4 mm
Integrated Debugger
PicoballoonLabs/Debug-Boards
Hardware designs for the integrated debug probe, debug adapter, flex debug cables and RF VNA calibrator
72 parts1MIT - 6 layers45 × 75 mm
- 4 layers112 × 100 mm
- 6 layers18.3 × 36.1 mm
- 2 layers38.9 × 48.9 mm
Questions
How big is the Outatime pro PCB?
It measures 25.7 × 27.7 mm and has 2 copper layers, 0.6 mm thick.
What parts does the Outatime pro use?
56 parts, built around the ALS-PT19-315C/L177/TR8, MAX40200ANS+T, LIS2DW12TR-MS and MIC5365-3.3YMT-TZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Outatime pro KiCad files?
From the evyd13/outatime-pro repository on GitHub, at the commit this page was made from: the board is PCB/OutatimePro.kicad_pcb and its schematic PCB/OutatimePro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Outatime pro design in my own project?
Its repository states no licence, so its author keeps all rights: ask evyd13 before reusing the design.