
STM32N6 Thesis Board
tobiasbaas/Roboterarm1
Herzlich willkommen zum Repo des Robotersarmes der Arbeitsgruppe. Bitte beachtet, dass es sich hierbei handelt um eine Erweiterung bereits vorhandener Infrastruktur.

Leafony AP05 STM32N6リーフ
Leafony stm32n6 is an open-source printed circuit board by leafony, from the leafony/ap05-stm32n6 repository on GitHub. It is a 6-layer board of 45 × 75 mm with 207 parts on 272 nets, routed with 3,638 tracks and 691 vias.
It is built around the STM32N657L0H3Q, TPS6282518DMQR and TPS6282533DMQR, with the ECMF2-40A100N6, MAX40200ANS+T and APS256XXN-OBR-BG among its other parts. Its parts include 75 resistors, 74 capacitors, 16 ICs, 13 diodes and 5 connectors. It belongs with the STM32 boards of this library.
LeafonyのMCUリーフ「AP05 STM32N6」のハードウェア設計リポジトリです。KiCadの回路図・基板データ、部品ライブラリ、製造用データを収録しています。
AP05は、STMicroelectronicsのSTM32N6シリーズを採用し、Arm Cortex-M55による画像処理やエッジAIの評価に利用するリーフです。製品概要はLeafony公式ドキュメントを参照してください。
以下は、本リポジトリの回路図・基板データに記載されている構成です。
| 項目 | 内容 |
|---|---|
| MCU | STM32N657L0H3Q(STMicroelectronics) |
| CPU | Arm Cortex-M55 |
| 外部Flash | MX25UM51245GXDI00-TR |
| 外部PSRAM | APS256XXN-OBR-BG |
| 接続 | Leafony Bus、USB Type-C、カメラコネクタ、デバッグ用コネクタ |
| 基板 | 6層、板厚0.8 mm |
| 設計ツール | KiCad 9.0 |
ピン接続や電源回路の詳細は、回路図を参照してください。
設計データから出力した3D表示です。
| 表面 | 裏面 |
|---|---|
![]() | ![]() |
| 資料 | ファイル |
|---|---|
| KiCadプロジェクト | leafony-stm32n6.kicad_pro |
| 回路図 | PDF / KiCad |
| 基板レイアウト | PDF / KiCad |
| 部品表(BOM) | Excel |
| 基板3Dモデル | STEP |
| 製造用データ | Gerber・ドリル・部品位置データ |
kicad/leafony-stm32n6/
├── leafony-stm32n6.kicad_pro # KiCadプロジェクト
├── leafony-stm32n6.kicad_sch # トップ階層の回路図
├── leafony-stm32n6.kicad_pcb # 基板レイアウト
├── *.kicad_sch # MCU、電源、メモリ、USBなどの階層回路図
├── sym-lib-table # プロジェクト用シンボルライブラリ設定
├── fp-lib-table # プロジェクト用フットプリントライブラリ設定
├── lib/
│ ├── Leafony.kicad_sym # Leafony用シンボル
│ ├── Leafony.pretty/ # Leafony用フットプリント
│ └── 3dmodels/ # 部品の3Dモデル
├── assets/ # 設計関連の画像
└── exported/ # 回路図PDF、BOM、STEP、基板画像など
└── Gerber/ # Gerber、ドリル、部品位置データkicad/leafony-stm32n6/leafony-stm32n6.kicad_pro をKiCadで開きます。Leafony用のシンボルとフットプリントは、プロジェクト内の sym-lib-table と fp-lib-table から ${KIPRJMOD}/lib/ を参照します。フォルダー構成を保ったまま開いてください。基板の標準3Dモデルは KICAD9_3DMODEL_DIR を参照しています。
公式ドキュメントでは、STM32N6向けの開発環境としてSTM32CubeIDEとSTM32CubeN6が案内されています。本リポジトリにはファームウェアを収録していません。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | 0R | Resistor_SMD:R_0402_1005Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R21, R22, R23, R24, R25 +23 |
| 28 | 100nF(M) 16V X7R | Capacitor_SMD:C_0201_0603Metric | C11, C15, C16, C22, C23, C24, C25, C26, C27, C28, C30, C32, C34, C36, C37, C38 +12 |
| 12 | 0R 1/4W | Resistor_SMD:R_0603_1608Metric | R45, R46, R58, R63, R64, R69, R70, R71, R72, R73, R74, R75 |
| 9 | 1uF(M) 50V X5R | Capacitor_SMD:C_0402_1005Metric | C52, C55, C59, C60, C62, C67, C68, C69, C70 |
| 9 | 1uF(M) 6.3V X5R | Capacitor_SMD:C_0201_0603Metric | C5, C14, C17, C18, C19, C20, C21, C29, C31 |
| 8 | 10k(J) | Resistor_SMD:R_0402_1005Metric | R43, R44, R51, R54, R57, R59, R60, R62 |
| 8 | 10uF(M) 10V X7R | Capacitor_SMD:C_0603_1608Metric | C33, C35, C56, C61, C63, C64, C65, C66 |
| 8 | DF2S7MSL,L3F | Leafony:SOD-962 SL2_TOS | D5, D6, D7, D8, D9, D10, D11, D12 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 5 | 4.7uF(M) 16V X5R | Capacitor_SMD:C_0603_1608Metric | C44, C45, C49, C50, C51 |
| 4 | 22uF(M) 6.3V X5R | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C10 |
| 4 | 4.7k(J) | Resistor_SMD:R_0402_1005Metric | R3, R4, R5, R20 |
| 4 | ECMF2-40A100N6 | Leafony:ECMF240A100N6 | U5, U6, U7, U8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 2 | 0.47uH | Leafony:IND_DFE201610E_MUR | L4, L5 |
| 2 | 100k(J) | Resistor_SMD:R_0402_1005Metric | R52, R55 |
| 2 | 10nF(M) 50V X7R | Capacitor_SMD:C_0402_1005Metric | C39, C53 |
| 2 | 1k(J) | Resistor_SMD:R_0402_1005Metric | R19, R50 |
| 2 | 200R(F) | Resistor_SMD:R_0402_1005Metric | R41, R42 |
| 2 | 3.3pF(J) 50V C0G | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 4.7uF(M) 6.3V X7R | Capacitor_SMD:C_0603_1608Metric | C57, C58 |
| 2 | 5.1k(J) | Resistor_SMD:R_0402_1005Metric | R65, R66 |
| 2 | 8.2pF(J) 50V C0G | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | MAX40200ANS | Package_BGA:WLP-4_0.728x0.728mm_Layout2x2_P0.35mm | U10, U16 |
| 2 | SML-A12U8TT86 | Leafony:LED_SML-A12_ROM | D1, D2 |
| 1 | 0.47uF(M) 6.3V X5R | Capacitor_SMD:C_0402_1005Metric | C41 |
| 1 | 1.0uH | Leafony:IND_DFE201610E_MUR | L1 |
| 1 | 100R(J) | Resistor_SMD:R_0402_1005Metric | R53 |
| 1 | 10k(F) | Resistor_SMD:R_0402_1005Metric | R67 |
| 1 | 18R@100MHz | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 1SS387 | Diode_SMD:D_SOD-523 | D3 |
| 1 | 2.2nF(M) 50V X7R | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 2.2nH | Inductor_SMD:L_0603_1608Metric | L3 |
| 1 | 2.7k(F) | Resistor_SMD:R_0402_1005Metric | R68 |
| 1 | 2R(F) | Resistor_SMD:R_0402_1005Metric | R49 |
| 1 | 32.768kHz | Leafony:XTAL_NX2012SA-32.768K-STD-MUB-1 | Y1 |
| 1 | 4.7uF(M) 10V X5R | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 48MHz | Leafony:CS13734-48M | Y2 |
| 1 | APS256XXN-OBR-BG | Leafony:BGA24C100P5X5_800X600X120 | U3 |
| 1 | BAT30F4 | Leafony:CR_B30F4_STM | D13 |
| 1 | BAT60JFILM | Leafony:CR_60JFILM_STM | D4 |
| 1 | BM06B-SRSS-TB | Connector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | J1 |
| 1 | CUS-12TB | Leafony:CUS-12TB_NDC | SW2 |
| 1 | CX90M-16P | Leafony:HRS_CX90M-16P | J4 |
| 1 | EVQ-P7B01P | Leafony:EVQ-P7B01P | SW1 |
| 1 | FH12-22S-0.5SH55 | Leafony:CONN_FH12-22S-0.5SH55_HIR | J3 |
| 1 | FTSH-107-01-L-DV-K-A | Leafony:SAMTEC_FTSH-107-01-L-DV-K-A | J2 |
| 1 | LD39020ADTPU18R | Leafony:VREG_LD39020ADTPU18R | U14 |
| 1 | LD39020ADTPU33R | Leafony:VREG_LD39020ADTPU33R | U15 |
| 1 | LD56100DPU18R | Leafony:DFN8_1P6X1P2X0P4_STM | U11 |
| 1 | LOGO | Leafony:LEAFONY_LOGO | G*** |
| 1 | Leafony Bus | Leafony:CN_F29 | CN1 |
| 1 | MPZ1005S300CT000 | Fuse:Fuse_0402_1005Metric | FB1 |
| 1 | MX25UM51245GXDI00-TR | Leafony:BGA24C100P5X5_800X600X120 | U4 |
| 1 | RE1C002UNTCL | Leafony:DIO_RB558WMF_ROM | Q1 |
| 1 | STL6N3LLH6 | Leafony:POWERFLAT-2X2 | Q2 |
| 1 | STM32N657L0H3Q | Leafony:VFBGA223_10X10_STM | U1 |
| 1 | TCPP01-M12 | Leafony:QFN50P300X300X100-13N-D | U9 |
| 1 | TPS6282518DMQR | Leafony:DMQ0006A | U12 |
| 1 | TPS6282533DMQR | Leafony:DMQ0006A | U13 |
| 1 | TS3A4751RUCR | Leafony:RUC14 | U2 |

tobiasbaas/Roboterarm1
Herzlich willkommen zum Repo des Robotersarmes der Arbeitsgruppe. Bitte beachtet, dass es sich hierbei handelt um eine Erweiterung bereits vorhandener Infrastruktur.



Raw1mage/bodesign
它與宿主無關、可獨立對外營運:任何支援 MCP 的客戶端(IDE、agent,或你自己的 HTTP 呼叫端) 都能透過 MCP Streamable HTTP 驅動它,不需要任何宿主外殼。正式服務部署在 DockerLab CT105 (http://192.168.100.141:8177/mcp/,經 nginx ingress,POST /invoke 一律 403);容器內部的 TCP port 從不直接對外…

alanmimms/nexrig
A ham oriented SSB exciter for 160m-10m that uses a PC or Raspberry Pi USB host as UI and DSP.



Protocentral/protocentral_healthypi6_hardware
Open hardware design files for HealthyPi 6 — STM32H757 vital-signs monitor with the HealthyLink modular expansion bus
It measures 45 × 75 mm and has 6 copper layers, 0.8 mm thick.
207 parts, built around the STM32N657L0H3Q, TPS6282518DMQR, TPS6282533DMQR and ECMF2-40A100N6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the leafony/ap05-stm32n6 repository on GitHub, at the commit this page was made from: the board is kicad/leafony-stm32n6/leafony-stm32n6.kicad_pcb and its schematic kicad/leafony-stm32n6/camera.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask leafony before reusing the design.