2 layers256.5 × 172.9 mm
2 layers0.1 × 0.1 mm
BatteryManagementUnit
EV-Project/BatteryManagementUnit- Size
- 0.1 × 0.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 87
- Pads
- 230
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 11 Oct 2016
- Updated
- 17 Nov 2016
Overview
BatteryManagementUnit is an open-source printed circuit board by EV-Project, from the EV-Project/BatteryManagementUnit repository on GitHub. It is a 2-layer board of 0.1 × 0.1 mm with 68 parts on 87 nets.
It is built around the MCP2551-I/SN, AMC1301DWV and TLP2361(E, with the FODM3052R4, AP1117E50G and RJ45 among its other parts. Its parts include 25 resistors, 14 ICs, 14 connectors, 5 transistors and 4 diodes. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
7
MCP2551-I/SN
SOIC-8-40℃~+85℃ 1Mbps 365uA 4.5V~5.5V 75mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversAMC1301DWV
SOIC-8-40℃~+125℃ 15kV/us 30uA 5000 50uV 8.2 Differential Isolated ΔΣ (Sigma-Delta) modulator、Fault detection、Full-differential topology ±250mV SOIC-8 Isolation Amplifiers ROHSTexas InstrumentsIsolation Amplifiers
TLP2361(E
SO-6,5LEAD-40℃~+125℃ 1.5V 1.6mA 10mA 15Mbps 2.7V~5.5V 20kV/us 3.75kV 5V 6V 6mA 80ns 80ns DC SO-6,5LEAD Logic Output Optoisolators ROHSToshibaLogic Output Optoisolators
FODM3052R4
SMD-4P-40℃~+100℃ 1 1.2V 1000V/us 3.75kV 300uA 4 600V 70mA DC No Random phase triggering TRIAC SMD-4P Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output Optoisolators
AP1117E50G
SOT-2230℃~+125℃@(Tj) 1 1.4V@(1A) 18V 1A 5V 70dB@(180Hz) Fixed Over Current Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedLinear Voltage Regulators (LDO)
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
PESD1CAN
SOT-23-65℃~+150℃ 11pF 1nA 2 200W@8/20us 24V 30.3V 3A@8/20us 70V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 120 | Resistors_SMD:R_1206_HandSoldering | R106, R107, R111, R115, R116, R117, R118, R119, R120 |
| 6 | TLP2361 | electric_car_lib:soic-5 | U104, U108, U110, U111, U201, U202 |
| 4 | 1k | Resistors_SMD:R_1206_HandSoldering | R103, R104, R108, R109 |
| 3 | D | Diodes_SMD:DO-214AB_Handsoldering | D101, D102, D103 |
| 3 | FODM3052 | electric_car_lib:MFP4L | U101, U105, U109 |
| 3 | Q_NPN_BCE | TO_SOT_Packages_SMD:TO-252-2Lead | Q101, Q104, Q105 |
| 3 | R | Resistors_SMD:R_1206_HandSoldering | R101, R102, R114 |
| 2 | 0 | Resistors_SMD:R_1210_HandSoldering | J101, J102 |
| 2 | 33 | Resistors_SMD:R_1206_HandSoldering | R112, R113 |
| 2 | 60 | Resistors_SMD:R_1206_HandSoldering | R204, R205 |
| 2 | C | Capacitors_SMD:C_1210_HandSoldering | C101, C102 |
| 2 | Q_NMOS_GDS | TO_SOT_Packages_SMD:TO-252-2Lead | Q102, Q103 |
| 2 | RJ45 | Connect:RJ45_8 | J201, J202 |
| 2 | Terminate | electric_car_lib:JumperSingle | JP201, JP202 |
| 1 | 100 | Resistors_SMD:R_1206_HandSoldering | R201 |
| 1 | 10K 2W | Resistors_ThroughHole:Resistor_Cement_KOA-BGR-3N | R110 |
| 1 | 10k 2W | Resistors_ThroughHole:Resistor_Cement_KOA-BGR-3N | R105 |
| 1 | 330 | Resistors_SMD:R_1206_HandSoldering | R202 |
| 1 | 4.7K | Resistors_SMD:R_1206_HandSoldering | R203 |
| 1 | 4.7nF | Capacitors_SMD:C_1210_HandSoldering | C201 |
| 1 | AMC1301 | electric_car_lib:amc1301 | U102 |
| 1 | AP1117D33 | TO_SOT_Packages_SMD:SOT-223 | U106 |
| 1 | AP1117E50 | TO_SOT_Packages_SMD:SOT-223 | U107 |
| 1 | Battery | Connect:bornier2 | P108 |
| 1 | CONT_H | Connect:bornier2 | P106 |
| 1 | CONT_H_mon | Connect:bornier2 | P104 |
| 1 | CONT_L | Connect:bornier2 | P107 |
| 1 | CONT_L_mon | Connect:bornier2 | P105 |
| 1 | Filter | electric_car_lib:JumperSingle | JP203 |
| 1 | HALL EFFECT | Pin_Headers:Pin_Header_Straight_1x04 | P101 |
| 1 | MCP2551-I/SN | Power_Integrations:SO-8 | U203 |
| 1 | PESD1CAN | TO_SOT_Packages_SMD:SOT-23_Handsoldering | D201 |
| 1 | PSU_ISO_3v | Pin_Headers:Pin_Header_Straight_1x04 | P109 |
| 1 | PSU_ISO_5v | Pin_Headers:Pin_Header_Straight_1x04 | P110 |
| 1 | Teensy_3.2 | electric_car_lib:Teensy3.2 | U103 |
| 1 | cellsH | Pin_Headers:Pin_Header_Straight_1x02 | P103 |
| 1 | cellsL | Pin_Headers:Pin_Header_Straight_1x02 | P102 |
Questions
How big is the BatteryManagementUnit PCB?
It measures 0.1 × 0.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BatteryManagementUnit use?
68 parts, built around the MCP2551-I/SN, AMC1301DWV, TLP2361(E and FODM3052R4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BatteryManagementUnit KiCad files?
From the EV-Project/BatteryManagementUnit repository on GitHub, at the commit this page was made from: the board is BatteryManagementUnit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BatteryManagementUnit design in my own project?
Its repository states no licence, so its author keeps all rights: ask EV-Project before reusing the design.
Similar boards
- 2 layers239.3 × 121.3 mm
- 2 layers
- 2 layers122.6 × 52.7 mm
- 2 layers248 × 174.4 mm
- 2 layers228 × 149.8 mm
MIC19
ZeniteSolar/MIC19
Módulo de Interface do Controle da embarcação solar Guarapuvu II (Zênite Solar)
300 partsGPL-3.0 - 2 layers121 × 52.1 mm
- 2 layers232.1 × 131.2 mm
