2 layers256.5 × 172.9 mm
2 layers121 × 52.1 mm
Basicsensormodule
ZeniteSolar/MRPC19Módulo Raspberry Pi CAN 2019
- Size
- 121 × 52.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 30
- Pads
- 159
- Tracks, vias
- 246, 12
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 May 2019
- Updated
- 19 Jan 2020
Overview
Basicsensormodule is an open-source printed circuit board by ZeniteSolar, from the ZeniteSolar/MRPC19 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 121 × 52.1 mm with 38 parts on 30 nets, routed with 246 tracks and 12 vias.
It is built around the MCP2551-I/SN, LM7805 and RJ45, with the LL4148 and PESD1CAN among its other parts. Its parts include 11 capacitors, 9 resistors, 5 connectors, 4 diodes and 3 ICs. It belongs with the interfaces and adapters and power boards and the Raspberry Pi (Linux) boards of this library.
Main components
5
MCP2551-I/SN
SOIC-8-40℃~+85℃ 1Mbps 365uA 4.5V~5.5V 75mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
LM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
LL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching Diodes
PESD1CAN
SOT-23-65℃~+150℃ 11pF 1nA 2 200W@8/20us 24V 30.3V 3A@8/20us 70V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
README
README.mdMRPC19
Módulo Raspberry PI CAN
As conexões com o MCP2515 foram realizadas com o SPI0 do Raspberry Pi:
| RASPBERRY PI | Description |
|---|---|
| GPIO08 | MCP2515 SS |
| GPIO09 | SPI0 MOSI |
| GPIO10 | SPI0 MOSI |
| GPIO11 | SPI0 SCK |
| GPIO25 | MCP2515 INT |
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C102, C201, C202, C205, C401, C502, C503 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R402, R403, R404, R405 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H101, H102, H103, H104 |
| 2 | 1uF | Capacitor_Tantalum_SMD:CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C501, C504 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C203, C204 |
| 2 | LED_RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D402, D403 |
| 2 | RJ45 | KicadZeniteSolarLibrary18:RJ45_YH59_01 | J601, J602 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R205 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R203 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R201 |
| 1 | 16MHz | Crystal:Crystal_HC49-U_Vertical | Y201 |
| 1 | 22K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R204 |
| 1 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R202 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F501 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | LL4148 | Diode_SMD:D_MiniMELF_Handsoldering | D501 |
| 1 | LM7805 | KicadZeniteSolarLibrary18:TO-220-3_Horizontal_TabDown_SMD | U501 |
| 1 | MCP2515-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U202 |
| 1 | MCP2551-I/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U201 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J501 |
| 1 | USART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J401 |
| 1 | pesd1can | Package_TO_SOT_SMD:SOT-23_Handsoldering | D201 |
Questions
How big is the Basicsensormodule PCB?
It measures 121 × 52.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Basicsensormodule use?
38 parts, built around the MCP2551-I/SN, LM7805, RJ45 and LL4148. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Basicsensormodule KiCad files?
From the ZeniteSolar/MRPC19 repository on GitHub, at the commit this page was made from: the board is hardware/basicsensormodule.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Basicsensormodule design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers239.3 × 121.3 mm
- 2 layers
- 2 layers122.6 × 52.7 mm
- 2 layers248 × 174.4 mm
- 2 layers228 × 149.8 mm
MIC19
ZeniteSolar/MIC19
Módulo de Interface do Controle da embarcação solar Guarapuvu II (Zênite Solar)
300 partsGPL-3.0 - 2 layers232.1 × 131.2 mm
- 2 layers63 × 108 mm
MSC25
ZeniteSolar/MSC25
Este projeto consiste em uma placa de circuito impresso (PCB) com firmware embarcado, projetada para realizar a leitura de alta precisão de um sensor de corrente de efeito Hall e transmitir os dados através do…
61 parts