2 layers116 × 102 mm
2 layers
Proto1
eutectic6337/coin13a challenge coin with blinky lights
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 30
- Pads
- 96
- Tracks, vias
- 161, 25
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Dec 2024
- Updated
- 18 May 2026
Overview
Proto1 is an open-source printed circuit board by eutectic6337, from the eutectic6337/coin1 repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board with 41 parts on 30 nets, routed with 161 tracks and 25 vias.
Its parts include 10 resistors, 10 diodes, 6 capacitors, 2 connectors and 2 switches. It belongs with the RISC-V boards of this library.
README
README.mdcoin1
challenge coin with blinky lights
Feature: Using 8 PWM channels to provide dimming function for 16 LEDs by connecting pairs in anti-parallel between a PWM pin and a GPIO.
built as a stack of 3 PCBs - components mounted on top of bottom board, second board has a cutout to fit a battery and for each mounted component, and top board has holes to transmit light from LEDs
finished coin to have [relatively] smooth top and bottom
using JLCPCB's serial-number mechanism to put a unique number on each coin
Initial code flashed onto these is a modified version of the Arduino Blink demo.
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 47R | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 10 | LED | LED_SMD:LED_0402_1005Metric | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 7 | TestPoint_THTPad_D2.0mm_Drill1.0mm | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | T51, T51, T52, T53, T54, T55, T56 |
| 6 | 10n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6 |
| 2 | BAT- | TestPoint:TestPoint_Pad_D4.0mm | -, B1 |
| 2 | touch | TestPoint:TestPoint_Pad_D4.0mm | S1, S2 |
| 1 | Conn_01x03 | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | TestPoint_THTPad_3.0x3.0mm_Drill1.5mm | TestPoint:TestPoint_THTPad_3.0x3.0mm_Drill1.5mm | T1 |
| 1 | WCH CH32V003F4U6 | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U1 |
Questions
What parts does the Proto1 use?
41 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Proto1 KiCad files?
From the eutectic6337/coin1 repository on GitHub, at the commit this page was made from: the board is hardware/reverse/proto1/reverse.kicad_pcb and its schematic hardware/smd0201/smd0201.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Proto1 design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from eutectic6337/coin1
9- 2 layers125 × 121.5 mm
- 2 layers120 × 38.3 mm
- 2 layers
- 2 layers50 × 48.6 mm
- 2 layers40 × 38.3 mm
- 2 layers
- 2 layers
- 2 layers16 × 29.5 mm
Similar boards
- 2 layers70 × 35 mm
- 2 layers270 × 11 mm
Daylight Disco
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
41 parts1.1kGPL-3.0 - 2 layers27.5 × 48.3 mm
ICE40DevBoard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
41 parts915 - 2 layers45 × 25 mm
Easy PD Sink
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
41 parts599 - 2 layers97 × 78.5 mm
Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
41 parts517GPL-2.0 - 2 layers96.1 × 78.6 mm
EYEBROW WARNING INDICATOR LEFT
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
41 parts431 - 2 layers37 × 15 mm
- 2 layers20.3 × 69.7 mm
PG attiny404
fabiansteiner/OpenValve
3D-printable pinch valve for irrigation and sensor-driven liquid control.
41 parts276CERN-OHL-S-2.0