Skip to the content
2 layers40 × 38.3 mmInternal, the printed circuit board in 3D

a challenge coin with blinky lights

Size
40 × 38.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
2
Pads
25
Tracks, vias
3, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
3 Dec 2024
Updated
18 May 2026

Overview

Internal is an open-source printed circuit board by eutectic6337, from the eutectic6337/coin1 repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 40 × 38.3 mm with 25 parts on 2 nets, routed with 3 tracks and 0 vias.

README

README.md

coin1

challenge coin with blinky lights

pre-DEFCON prototype, from the inside

Feature: Using 8 PWM channels to provide dimming function for 16 LEDs by connecting pairs in anti-parallel between a PWM pin and a GPIO.

built as a stack of 3 PCBs - components mounted on top of bottom board, second board has a cutout to fit a battery and for each mounted component, and top board has holes to transmit light from LEDs

finished coin to have [relatively] smooth top and bottom

using JLCPCB's serial-number mechanism to put a unique number on each coin

Initial code flashed onto these is a modified version of the Arduino Blink demo.

Parts

25
QtyValueFootprintReferences
17TestPoint_THTPad_3.0x3.0mm_Drill1.5mmTestPoint:TestPoint_THTPad_3.0x3.0mm_Drill1.5mmT1, T12, T13, T14, T15, T16, T18, T19, T20, T21, T21, T21, T21, T21, T21, T21 +1
7TestPoint_THTPad_D2.0mm_Drill1.0mmTestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmT51, T51, T52, T53, T54, T55, T56

The 24 most common of 25 parts.

More from eutectic6337/coin1

9
  • 2 layers116 × 102 mmReverse panel, the printed circuit board in 3D

    Reverse panel

    eutectic6337/coin1

    a challenge coin with blinky lights

    342 parts3CC0-1.0
  • 2 layers125 × 121.5 mmSmd0402, the printed circuit board in 3D

    Smd0402

    eutectic6337/coin1

    a challenge coin with blinky lights

    131 parts3CC0-1.0
  • 2 layers120 × 38.3 mmSmd0201, the printed circuit board in 3D

    Smd0201

    eutectic6337/coin1

    a challenge coin with blinky lights

    73 parts3CC0-1.0
  • 2 layersCoin1, the printed circuit board in 3D

    Coin1

    eutectic6337/coin1

    a challenge coin with blinky lights

    55 parts3CC0-1.0
  • 2 layers50 × 48.6 mmInternal, the printed circuit board in 3D

    Internal

    eutectic6337/coin1

    a challenge coin with blinky lights

    48 parts3CC0-1.0
  • 2 layersProto1, the printed circuit board in 3D

    Proto1

    eutectic6337/coin1

    a challenge coin with blinky lights

    41 parts3CC0-1.0
  • 2 layersObverse, the printed circuit board in 3D

    Obverse

    eutectic6337/coin1

    a challenge coin with blinky lights

    23 parts3CC0-1.0
  • 2 layersObverse, the printed circuit board in 3D

    Obverse

    eutectic6337/coin1

    a challenge coin with blinky lights

    13 parts3CC0-1.0
  • 2 layers16 × 29.5 mmSAO CR1616, the printed circuit board in 3D

    SAO CR1616

    eutectic6337/coin1

    a challenge coin with blinky lights

    5 parts3CC0-1.0

Similar boards

  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0
  • 2 layers113.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    25 parts2.1k
  • 2 layers58.4 × 114.3 mmPicoPedal, the printed circuit board in 3D

    PicoPedal

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    25 parts915
  • 2 layers54 × 15 mmXyp gpib, the printed circuit board in 3D

    Xyp gpib

    xyphro/UsbGpib

    Versatile, cheap and portable USB to GPIB converter (USBTMC class based)

    25 parts690MIT
  • 2 layers50 × 76 mmVoron 0, the printed circuit board in 3D

    Voron 0

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    25 parts397Apache-2.0
  • 2 layers237.5 × 102.9 mmStorage, the printed circuit board in 3D

    Storage

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    25 parts301Unlicense
  • 2 layers43.3 × 21 mmNanoS3 Carrier, the printed circuit board in 3D

    NanoS3 Carrier

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    25 parts296

Questions

How big is the Internal PCB?

It measures 40 × 38.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Internal use?

25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Internal KiCad files?

From the eutectic6337/coin1 repository on GitHub, at the commit this page was made from: the board is hardware/internal/proto1/internal.kicad_pcb and its schematic hardware/smd0201/smd0201.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Internal design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).