

ESP32-S2-Breakout
ESP32 based ECU
- Size
- 61 × 30.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 57
- Pads
- 194
- Tracks, vias
- 428, 52
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Nov 2024
- Updated
- 2 Feb 2025
Overview
ESP32-S2-Breakout is an open-source printed circuit board by EsTaNG9, from the EsTaNG9/freertos-ecu repository on GitHub. It is a 2-layer board of 61 × 30.5 mm with 38 parts on 57 nets, routed with 428 tracks and 52 vias.
It is built around the ESP32-S2-WROOM-N4, USBLC6-2SC6 and XC6220B331MR. Its parts include 13 capacitors, 11 resistors, 3 ICs, 3 connectors and 2 diodes. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.
Main components
3ESP32-S2-WROOM-N4
SMD,31x18mm-40℃~+85℃ -97dBm 19.5dBm 2.4GHz 310mA 3V~3.6V 63mA ESP32-S2 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S SMD,31x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)XC6220B331MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.md[blocked]
FREERTOS ECU
This is a poor attempt at developing a basic enegine managment system based on the ESP32 microprocessor.
View Demo
·
Report Bug
·
Request Feature
About The Project
Our project consist on developing a simple engine management system for a 1 cylinder 4 or 2 stroke internal combustion engine. The hear of this project was to develop a way to trigger the sparkplug at the correct time for each rotation of the engine.
Limitações:
- The ESP32 only has 4 timers
- An PIC or ARM based microcontroller would be a better application, just because normally they have more timers available
- Falta de tempo para melhor desenvolver o projeto :smile:
Despite our efforts, the deadline came in quicly and unfortunately we didnt have time to finnish this project the our fullest capability.
Materials
This is an example of how to list things you need to use the software and how to install them.
- 1x ESP32
- 1x Hall Sensor
- 4x Potentiometers (Emulate de CLT, IAT, MAP and TPS sensors)
- 1x ILI9341 320x240 SPI TFT LCD Display with Touch Sensor
- 3x LED´s + associated Resistors (Emulate Ignition Coil, Fuel Injector and Fuel Pump)
- 2x ESP32 Dev Kits (One as the controller the other has the Hall Sensor emulator)
- Breadboard
Roadmap
- Hall sensor triggering an interrupt
- Trigger pattern 36-1 on the interrupt
- DISPLAY
- Touch
- VE table
- IGN table
- Main page
- Read + interpolate value from tables
- ADC
- MAP
- IAT
- CLT
- TPS
See the open issues for a full list of proposed features (and known issues).
Contact
João Serrada - @estang9 - 2192349@my.ipleiria.pt
Alexandre Bernardo - 2213099@my.ipleiria.pt
Project Link: https://github.com/EsTaNG9/freertos-ecu
Youtube Video Link: https://youtube.com/shorts/LGoChy05eWk
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C5, C6, C11 |
| 4 | 20p | Capacitor_SMD:C_0603_1608Metric | C9, C10, CL1, CL2 |
| 2 | 0r | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R8 |
| 2 | 22r | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | >1A | Inductor_SMD:L_0603_1608Metric | FB1, FB2 |
| 2 | Conn_01x23 | Connector_PinHeader_2.54mm:PinHeader_1x23_P2.54mm_Vertical | J2, J3 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 100r | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 32.768KHz 12.5p | ESP32-S2-Breakout:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 750r | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | Boot | ESP32-S2-Breakout:Alps_SKRK | SW2 |
| 1 | ESP32-S2-WROOM | ESP32-S2-Breakout:ESP32-S2-WROOM | U2 |
| 1 | N/C | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Reset | ESP32-S2-Breakout:Alps_SKRK | SW1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0 | ESP32-S2-Breakout:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XC6220B331MR | Package_TO_SOT_SMD:SOT-23-5 | U3 |
Similar boards
- 2 layers124 × 35 mm

- 2 layers64.3 × 25.4 mm

- 2 layers155 × 80 mm

- 2 layers27.9 × 92.7 mm

- 2 layers51.1 × 30 mm

Franzininho WIFI
Franzininho/Franzininho-WIFI-dev-edition
Versão da Franzininho para teste e validação do ESP32-S2
31 parts39 - 2 layers64.8 × 41 mm

- 4 layers51.3 × 23.4 mm

20210211 eduino
ccadic/HackZeGarage
ESP32-S2 and CC1101S 433Mhz usb stick to record and send car gates/garages data keys and open stuff
33 parts19 - 2 layers83 × 71 mm

Questions
How big is the ESP32-S2-Breakout PCB?
It measures 61 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32-S2-Breakout use?
38 parts, built around the ESP32-S2-WROOM-N4, USBLC6-2SC6 and XC6220B331MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-S2-Breakout KiCad files?
From the EsTaNG9/freertos-ecu repository on GitHub, at the commit this page was made from: the board is board/ecu_v0.1/ESP32-S2-Breakout/ESP32-S2-Breakout.kicad_pcb and its schematic board/ecu_v0.1/ESP32-S2-Breakout/ESP32-S2-Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-S2-Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask EsTaNG9 before reusing the design.