
Franzininho WIFI
Franzininho/Franzininho-WIFI-dev-edition
Versão da Franzininho para teste e validação do ESP32-S2

Franzininho WiFi is a board with ESP32-S2.
Franzininho WiFi is an open-source printed circuit board by Franzininho, from the Franzininho/Franzininho-WiFi repository on GitHub. It is a 2-layer board of 64.3 × 25.4 mm with 38 parts on 52 nets, routed with 401 tracks and 40 vias.
It is built around the ESP32-S2-WROOM-N4, AP2112K-3.3 and USBLC6-2SC6, with the 1N5819W among its other parts. Its parts include 9 capacitors, 8 resistors, 6 connectors, 4 diodes and 3 ICs. It belongs with the radio and wireless boards and the ESP32 boards of this library.
The Franzininho WiFi Board is a development board based on the ESP32-S2-WROOM module.

For more details, check the official documentation:
Franzininho WiFi Documentation
ESP32-S2-WROOM Module
Interfaces
Pinout
LEDs
Buttons
USB
Power Supply
Programming Support

This project is open-source hardware and is available under the CERN Open Hardware License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R5 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D2, D3, D4 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C9 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | Conn_01x20_Male | Franzininho-WIFI-kicad:PinSocket_1x20_P2.54mm_Vertical | J2, J3 |
| 2 | LOGO | Graphics:wifi | G***, G*** |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 1N5819W | Diode_SMD:D_SOD-123F | D1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_PTS810 | SW2 |
| 1 | Conn_01x03_Female | Franzininho-WIFI-kicad:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04_Female | Franzininho-WIFI-kicad:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | ESP32-S2-WROOM | Espressif:ESP32-S2-WROOM | U2 |
| 1 | LOGO | Graphics:logo-franzininho12_7 | G*** |
| 1 | LOGO | Graphics:bandeiraBrasil | G*** |
| 1 | RESET | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
The 36 most common of 38 parts.

Franzininho/Franzininho-WIFI-dev-edition
Versão da Franzininho para teste e validação do ESP32-S2

01HACKER01/Chaox-75-v2
This repository contains the firmware and hardware files for my CHAOX-75 keyboard project.



Mposiblee/Zireael
The keyboard is based on Dao Chok BLE. The locations of components on the board have been changed, space for the battery has been added, and the thumb cluster has also been changed.

tubbytwins/bumwings-kbd
Ergonomic keyboard PCB design that uses the Waveshare RP2040-zero board.

HeyPCB/esp32-s3-devkit
ESP32-S3 dev board in the DevKitC-1 layout (31 x 64 mm, 4 layers, KiCad 10), built through HeyPCB's MCP server

It measures 64.3 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
38 parts, built around the ESP32-S2-WROOM-N4, AP2112K-3.3, USBLC6-2SC6 and 1N5819W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Franzininho/Franzininho-WiFi repository on GitHub, at the commit this page was made from: the board is Franzininho-WIFI-kicad/Franzininho WIFI.kicad_pcb and its schematic Franzininho-WIFI-kicad/Franzininho WIFI.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Franzininho before reusing the design.