Skip to the content
4 layers51 × 23 mmMini, the printed circuit board in 3D

Schematics and Board design for ElasticNodeHardware

Size
51 × 23 mm
Copper layers
4
Thickness
1.6 mm
Parts
78
Nets
98
Pads
351
Tracks, vias
508, 276
Pours
7
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
16 Jun 2019
Updated
5 Nov 2026

Overview

Mini is an open-source printed circuit board by es-ude, from the es-ude/elasticai.hardware repository on GitHub, published under the MIT licence. It is a 4-layer board of 51 × 23 mm with 78 parts on 98 nets, routed with 508 tracks and 276 vias.

It is built around the ICE40UP5K-SG48ITR50, RP2350A and W25Q16JVUXIQ, with the TLV73312PDBV, TLV73333PDBV and ABM8G-25.000MHZ-18-D2Y-T3 among its other parts. Its parts include 25 capacitors, 25 resistors, 8 ICs, 4 connectors and 2 diodes. It belongs with the RP2040, RP2350 and FPGA and CPLD boards of this library.

Main components

7

README

readme.md

Elastic Node Hardware Platform

This repo contains the hardware design files of our elastic node hardware for deploying deep learning architectures on embedded hardware.

ENv6 - Elastic Node v6

Still in progress

ENv5 - Elastic Node v5

The 5th generation of Elastic node is designed based on the 4th version, but with some improvements. The main improvements are:

  • Using Cortex-M0 MCU instead of AVR 8-bit MCU, to gain more performance and lower power consumption.
  • Using SPI as the communication interface between MCU and the FPGA to save more IO pins.
  • Simplify the power supply circuit to reduce the space and improve reliability.
  • Adding an energy meter chip to ease the energy measurement.
  • Optimize the PCB layout to reduce the PCB size.

Before you start using the ENv5, please read the following documents accordingly:

Troubleshooting

  • When you notice the esp32 is not responding to the RP2040, you can apply the pre-build firmware to test.
    • some descriptions about the behavior of the test are available here.

Parts

78
QtyValueFootprintReferences
2310uCapacitor_SMD:C_0402_1005MetricC1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +7
135k1Resistor_SMD:R_0402_1005MetricR5, R7, R8, R17, R18, R19, R20, R21, R22, R25, R26, R27, R28
6750RResistor_SMD:R_0402_1005MetricR9, R10, R15, R16, R23, R24
41RResistor_SMD:R_0603_1608MetricR1, R2, R3, R12
216pCapacitor_SMD:C_0402_1005MetricC24, C25
227R4Resistor_SMD:R_0402_1005MetricR4, R6
2SMA-FEMALE-Hconnectors:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMountJ2, J4
2W25Q16JVUXIQcustom_library:USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mmU6, U7
1+1V2custom_library:TestPoint_Pad_D1.0mmTP1
1+3V3custom_library:TestPoint_Pad_D1.0mmTP2
13µ3custom_library:L_0805_2012_metric_Alligned_HandSolderL1
1ICE40UP5K-SG48ITR50custom_library:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mmU5
1KX7_12Mcustom_library:KX-7Y1
1LED_0603LED_SMD:LED_0603_1608MetricD1
1LOGOlogos:logo_ude_5x5G***
1NetTie_2NetTie:NetTie-2_SMD_Pad0.5mmNT1
1PAC1954T-E4Mxsensors:VQFN-16-1EP_3x3mm_P0.5mm_EP1.1x1.1mmU1
1PMODConnector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_HorizontalU4
1Pico Debugger (SWD)Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1RP2350Acustom_library:QFN-60_EP_7x7_Pitch0.4mmU8
1TLV73312PDBVPackage_TO_SOT_SMD:SOT-23-5U2
1TLV73333PDBVPackage_TO_SOT_SMD:SOT-23-5U9
1USB-C Receptable (16P)connectors:USB_C_Receptacle_16PJ1
1WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD2
1~{BOOT}connectors:TACTILE-SWITCHS1
1~{RST}connectors:TACTILE-SWITCHS2

The 72 most common of 78 parts.

More from es-ude/elasticai.hardware

7
  • 8 layers90 × 65 mmDigital board v1, the printed circuit board in 3D

    Digital board v1

    es-ude/elasticai.hardware

    Schematics and Board design for ElasticNodeHardware

    261 parts4MIT
  • 4 layers34 × 34 mmElasticnode tiny, the printed circuit board in 3D

    Elasticnode tiny

    es-ude/elasticai.hardware

    Schematics and Board design for ElasticNodeHardware

    125 parts4MIT
  • 2 layers120 × 70 mmMXO Offset Generator, the printed circuit board in 3D

    MXO Offset Generator

    es-ude/elasticai.hardware

    Schematics and Board design for ElasticNodeHardware

    115 parts4MIT
  • 4 layers73 × 45 mmENV6 DemoBoard 1, the printed circuit board in 3D

    ENV6 DemoBoard 1

    es-ude/elasticai.hardware

    Schematics and Board design for ElasticNodeHardware

    106 parts4MIT
  • 2 layers55.9 × 45 mmFPGABoard GateMate 1, the printed circuit board in 3D

    FPGABoard GateMate 1

    es-ude/elasticai.hardware

    Schematics and Board design for ElasticNodeHardware

    81 parts4MIT
  • 2 layers55.9 × 45 mmFPGABoard Spartan7 v1, the printed circuit board in 3D

    FPGABoard Spartan7 v1

    es-ude/elasticai.hardware

    Schematics and Board design for ElasticNodeHardware

    54 parts4MIT
  • 2 layers55 × 60 mmMXO Offset Generator, the printed circuit board in 3D

    MXO Offset Generator

    es-ude/elasticai.hardware

    Schematics and Board design for ElasticNodeHardware

    45 parts4MIT

Similar boards

  • 4 layers49.4 × 111.4 mmEeg hardware v1, the printed circuit board in 3D

    Eeg hardware v1

    es-ude/eeg-hardware

    Repo of the Custom Hardware Design Files of the EEG-based Gaming Controller

    412 partsMIT
  • 2 layers100 × 68 mmFirst fpga pcb, the printed circuit board in 3D

    First fpga pcb

    mattvenn/first-fpga-pcb

    FPGA dev board based on Lattice iCE40 8k

    70 parts83
  • 2 layers97.6 × 74.6 mmFpga board, the printed circuit board in 3D

    Fpga board

    kevinroshann/fpga_board

    48 parts
  • 2 layers141 × 150 mmMidiori, the printed circuit board in 3D

    Midiori

    fabPlane/x68000-midi

    X68000 MIDI and 8 MB RAM expansion card: Gowin GW1NR-9, YM3802-compatible gateware in Amaranth, and a universal I/O slot breakout. CC0.

    45 partsCC0-1.0
  • 2 layersPcb dev fpga iCE40, the printed circuit board in 3D

    Pcb dev fpga iCE40

    shishir-dey/pcb-dev-fpga-iCE40

    A 2 layer development board with a Lattice Semiconductor ICE40UP5K-SG48ITR FPGA. Made with KiCad

    57 partsMIT
  • 6 layers70 × 50 mmThunderbolt pcie adapter, the printed circuit board in 3D

    Thunderbolt pcie adapter

    antmicro/thunderbolt-pcie-adapter

    This project contains open hardware design files for an adapter board wrapping 4-lane (i.e. 4x) PCIe Gen 3.0 devices into a Thunderbolt 3 uplink. It is based on the Intel/JHL6340SLLSQ Thunderbolt controller.

    272 parts82Apache-2.0
  • 10 layers120 × 120 mmK410t devboard, the printed circuit board in 3D

    K410t devboard

    antmicro/kintex-410t-devboard

    This repository contains open hardware design files for a devkit created for AMD-Xilinx Kintex-7 K410T FPGA.

    1,020 parts46Apache-2.0
  • 4 layers43 × 43 mmGmsl serializer, the printed circuit board in 3D

    Gmsl serializer

    antmicro/gmsl-serializer

    Experimental GMSL2 serializer board compatible with Antmicro MIPI CSI video accessories

    118 parts24Apache-2.0

Questions

How big is the Mini PCB?

It measures 51 × 23 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Mini use?

78 parts, built around the ICE40UP5K-SG48ITR50, RP2350A, W25Q16JVUXIQ and TLV73312PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mini KiCad files?

From the es-ude/elasticai.hardware repository on GitHub, at the commit this page was made from: the board is v6/mini/mini.kicad_pcb and its schematic measurement/mxo_offset_full/MXO_Offset_Generator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mini design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).