Skip to the content
2 layers100 × 60 mmLVPowerModule, the printed circuit board in 3D

KiCad design files for the power boards of the Xplore rover.

Size
100 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
81
Nets
60
Pads
339
Tracks, vias
790, 557
Pours
45
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
26 Feb 2025
Updated
20 Sep 2026

Overview

LVPowerModule is an open-source printed circuit board by EPFLXplore, from the EPFLXplore/Power_HW repository on GitHub. It is a 2-layer board of 100 × 60 mm with 81 parts on 60 nets, routed with 790 tracks and 557 vias.

It is built around the LTC3892EUH#PBF, LTC4372CMS8#TRPBF and ADUM1251ARZ, with the SI8640EB-B-IU, CRCW060322K1FKEBC and A750MW687M1VAAE018 among its other parts. Its parts include 35 capacitors, 27 resistors, 8 transistors, 6 ICs and 2 connectors. It belongs with the robots and motor control boards of this library.

Main components

12

README

README.md

ERC_POWER_HW

This repository contains the KiCad design files for the power boards of the rover. The associated software can be found on the ERC_POWER_SW repository.

Parts

81
QtyValueFootprintReferences
13C0603C104K5RACTUSamacSys.PcbLib:CAPC1608X95NC6, C10, C13, C16, C17, C19, C20, C25, C26, C27_D1, C27_D2, C30, C32
7CRCW060322K1FKEBSamacSys.PcbLib:RESC1608X50NR5, R10, R11, R12, R13, R20, R21
6CRCW06030000ZSTBSamacSys.PcbLib:RESC1608X50NR8, R9, R14, R15, R16, R17
5A750MW687M1VAAE018SamacSys.PcbLib:CAPPRD500W65D1000H1800C3, C4, C5, C7, C33
4BSC016N06NSATMA1Vault:FP-PG-TDSON-8-MFGQ5_D1, Q5_D2, Q6_D1, Q6_D2
4BSZ0703LSSamacSys.PcbLib:BSZ011NE2LS5IATMA1Q1, Q2, Q3, Q4
4CRCW06035K60JNEACSamacSys.PcbLib:RESC1608X50NR7, R18, R19, R23
2C0603C102J5RACTUSamacSys.PcbLib:CAPC1608X95NC1, C2
2C0603C103K5RACTUSamacSys.PcbLib:CAPC1608X95NC28_D1, C28_D2
2C1206C105K5RACSamacSys.PcbLib:CAPC3216X110NC23, C24
2C3225X7R2A106K250ACSamacSys.PcbLib:CAPC3225X230NC29_D1, C29_D2
2C5750X7S2A106K230KBSamacSys.PcbLib:CAPC5750X310NC8, C9
2CRCW0603100KJNEACSamacSys.PcbLib:RESC1608X55NR3, R22
2CRCW060310R0JNEACSamacSys.PcbLib:RESC1608X55NR24_D1, R24_D2
2CRCW06031K00FKECCSamacSys.PcbLib:RESC1608X55NR25_D1, R25_D2
2CRF2512-FZ-R005ELFSamacSys.PcbLib:RESC6432X80NR1, R2
2LTC4372CMS8#TRPBFSamacSys.PcbLib:SOP65P490X110-8NIC4_D1, IC4_D2
2PQ2614BHA-100KSamacSys.PcbLib:PQ2614BLA1R0KL1, L2
2T598D336M035ATE0652021-05-11_14-36-17.SchLib:CAPMP7.6X4.3_3.1N_KEMC21, C22
146437-3001SamacSys.PcbLib:464373001J1
1980TRSamacSys.PcbLib:980TRJ2
1ADUM1251ARZSamacSys.PcbLib:SOIC127P600X175-8NIC3
1C0603C121J5GACTUSamacSys.PcbLib:CAPC1608X87NC14
1C0603C151J5GACSamacSys.PcbLib:CAPC1608X87NC15
1C0603C362J5GACTUSamacSys.PcbLib:CAPC1608X87NC12
1C0603C512J5GACAUTOSamacSys.PcbLib:CAPC1608X87NC11
1C1206X475M5RACAUTOSamacSys.PcbLib:CAPC3316X195NC18
1CRCW060324K9FKTASamacSys.PcbLib:RESC1608X50NR4
1CRCW060326K7FKEBSamacSys.PcbLib:RESC1608X50NR6
1LTC3892EUH#PBFSamacSys.PcbLib:QFN50P500X500X80-33N-DIC1
1MCP1799T-3302H_TTSamacSys.PcbLib:SOT95P237X112-3NPS1
1MCP47FEB02A0-E_STSamacSys.PcbLib:SOP65P640X120-8NIC2
1SI8640EB-B-IUSamacSys.PcbLib:SOP64P600X175-16NIC5

More from EPFLXplore/Power_HW

8
  • 4 layers100 × 70 mmElonMux, the printed circuit board in 3D

    ElonMux

    EPFLXplore/Power_HW

    KiCad design files for the power boards of the Xplore rover.

    329 parts7
  • 6 layers204.5 × 71.7 mmSmps legged robot, the printed circuit board in 3D

    Smps legged robot

    EPFLXplore/Power_HW

    KiCad design files for the power boards of the Xplore rover.

    327 parts7
  • 6 layers79.6 × 58 mmSMPS legged robot module, the printed circuit board in 3D

    SMPS legged robot module

    EPFLXplore/Power_HW

    KiCad design files for the power boards of the Xplore rover.

    156 parts7
  • 4 layers123 × 84.5 mmPolluxIII, the printed circuit board in 3D

    PolluxIII

    EPFLXplore/Power_HW

    KiCad design files for the power boards of the Xplore rover.

    118 parts7
  • 2 layers100 × 60 mmHVPowerModule, the printed circuit board in 3D

    HVPowerModule

    EPFLXplore/Power_HW

    KiCad design files for the power boards of the Xplore rover.

    105 parts7
  • 4 layers50 × 135 mmPower hat, the printed circuit board in 3D

    Power hat

    EPFLXplore/Power_HW

    KiCad design files for the power boards of the Xplore rover.

    74 parts7
  • 2 layers97.1 × 70 mm5V Buck Board, the printed circuit board in 3D

    5V Buck Board

    EPFLXplore/Power_HW

    KiCad design files for the power boards of the Xplore rover.

    12 parts7
  • 4 layers40 × 65 mmPower hat wago, the printed circuit board in 3D

    Power hat wago

    EPFLXplore/Power_HW

    KiCad design files for the power boards of the Xplore rover.

    12 parts7

Similar boards

  • 4 layers85 × 56 mmDwc hat, the printed circuit board in 3D

    Dwc hat

    dwcguru1/dwc-hat

    Raspberry Pi Monitor for Deep-Water-Cultures (DWC)

    100 parts4MIT
  • 4 layers212 × 116 mmEswitch simple, the printed circuit board in 3D

    Eswitch simple

    dpeckham/eswitch

    8-channel ESP32-S3 + PROFET+2 (BTS7008-1EPP) 12V load switch with 3-position ATO fuse bypass, KiCad 10, script-generated

    230 parts
  • 4 layers60 × 60 mmBLDC Controller, the printed circuit board in 3D

    BLDC Controller

    HSabinoR/K-9R

    A Low-Cost (hopefully) Robotic Dog

    84 parts
  • 2 layers85.7 × 137.2 mmPIDDEF, the printed circuit board in 3D

    PIDDEF

    SNolasco86/ProjectosKiCad

    Proyectos PCBen software KiCad

    95 parts
  • 2 layers85 × 56.5 mmAIOR, the printed circuit board in 3D

    AIOR

    GBert/misc

    miscellaneous stuff / unsorted

    156 parts99
  • 2 layers40 × 60 mmJoint controller board rev d power, the printed circuit board in 3D

    Joint controller board rev d power

    aliahumanoid/alia-humanoid-core

    Humanoid research project (Phase 0): firmware, host software, STL files and electronics for tendon-driven joints inside real human proportions. GPLv3 software, CC BY-NC-ND hardware files.

    40 parts12GPL-3.0
  • 2 layers162.9 × 178.9 mmAMPCD, the printed circuit board in 3D

    AMPCD

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    81 parts431

Questions

How big is the LVPowerModule PCB?

It measures 100 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LVPowerModule use?

81 parts, built around the LTC3892EUH#PBF, LTC4372CMS8#TRPBF, ADUM1251ARZ and SI8640EB-B-IU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LVPowerModule KiCad files?

From the EPFLXplore/Power_HW repository on GitHub, at the commit this page was made from: the board is Pollux/Kicad/LVPowerModule/KiCad FIles/LVPowerModule.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LVPowerModule design in my own project?

Its repository states no licence, so its author keeps all rights: ask EPFLXplore before reusing the design.