4 layers85 × 56 mm
2 layers85.7 × 137.2 mm
Proyectos PCBen software KiCad
- Size
- 85.7 × 137.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 95
- Nets
- 106
- Pads
- 367
- Tracks, vias
- 740, 44
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Mar 2017
- Updated
- 30 Mar 2017
Overview
PIDDEF is an open-source printed circuit board by SNolasco86, from the SNolasco86/ProjectosKiCad repository on GitHub. It is a 2-layer board of 85.7 × 137.2 mm with 95 parts on 106 nets, routed with 740 tracks and 44 vias.
It is built around the TME 1205S, LM358 and ADUM1251ARZ. Its parts include 22 capacitors, 19 resistors, 17 connectors, 8 inductors and 6 ICs.
Main components
3TME 1205S
SIP,11.5x7.1mm-40℃~+85℃ 1 10.8V~13.2V 110kHz 13mA 150mVp-p 1W 1kV 200mA 33uF 5V 71% Short Circuit Protection SIP,11.5x7.1mm Isolated Power Modules ROHSTRACO POWERIsolated Power Modules
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
ADUM1251ARZ
SOIC-8-40℃~+105℃ 2500 35kV/us Bidirectional SOIC-8 I2C Isolators ROHSAnalog DevicesDigital Isolators
Parts
95| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | R | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R1, R10, R11, R14, R15, R16, R17, R18, R19, R20, R21, R22, R25, R26, R27, R28 +3 |
| 14 | C | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C3, C4, C5, C6, C8, C11, C13, C14, C17, C18, C21, C22, C23, C24 |
| 6 | CP1 | Capacitors_ThroughHole:C_Radial_D8_L11.5_P3.5 | C1, C2, C7, C12, C15, C16 |
| 5 | HEADER_3 | Sockets_WAGO734:WAGO_734_3pin_Straight_RuggedPads | J5, J6, J7, J8, J9 |
| 5 | INDUCTOR | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | L4, L5, L6, L7, L12 |
| 5 | Jumper_NO_Small | Buttons_Switches_SMD:SW_SPST_B3U-1000P-B | JP2, JP3, JP4, JP5, JP6 |
| 3 | HEADER_2 | Sockets_WAGO734:WAGO_734_2pin_Straight_RuggedPads | J1, J2, J10 |
| 3 | L_Small | Inductors_NEOSID:Neosid_Inductor_SM-NE30_SMD1210 | L1, L2, L3 |
| 2 | 7805correg | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | U1, U2 |
| 2 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P5, P6 |
| 2 | CONN_02X08 | Pin_Headers:Pin_Header_Straight_2x08 | P4, P9 |
| 2 | CP1 | Capacitors_ThroughHole:C_Radial_D5_L6_P2.5 | C9, C10 |
| 2 | D | Diodes_ThroughHole:Diode_DO-35_SOD27_Horizontal_RM10 | D1, D2 |
| 2 | NCP1117ST33T3G | TO_SOT_Packages_SMD:SOT-223 | U3, U4 |
| 2 | ZENER | Discret:D4 | D7, D8 |
| 1 | AduM1251 | SMD_Packages:SOIC-8-N | U6 |
| 1 | CONN_01X02 | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | P14 |
| 1 | CONN_01X04 | Socket_Strips:Socket_Strip_Straight_1x04 | P12 |
| 1 | CONN_01X07 | Socket_Strips:Socket_Strip_Straight_1x07 | P7 |
| 1 | CONN_01X08 | Socket_Strips:Socket_Strip_Straight_1x08 | P13 |
| 1 | CONN_01X10 | Socket_Strips:Socket_Strip_Straight_1x10 | P3 |
| 1 | CONN_2 | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | K1 |
| 1 | Conn_Poncho2P_2x_20x2 | Poncho_Esqueleto:Conn_Poncho_SinBorde | XA1 |
| 1 | D_Small | Diodes_ThroughHole:Diode_DO-35_SOD27_Horizontal_RM10 | D13 |
| 1 | FUSE | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_SemiClosed_Casing10x25mm | F1 |
| 1 | JUMPER | Varistors:RV_Disc_D7_W5.4_P5 | JP1 |
| 1 | LED | LEDs:LED-3MM | D3 |
| 1 | LM358 | Housings_DIP:DIP-8_W7.62mm_LongPads | U5 |
| 1 | LOGO | Poncho_Esqueleto:Logo_Poncho | Power ADQ |
| 1 | Logo_EDU-CIAA | Poncho_Esqueleto:Logo_EDU-CIAA | G*** |
| 1 | Logo_OSHWA | Poncho_Esqueleto:Logo_OSHWA | G101 |
| 1 | Module_LevelShifter | PIDDEF:Adafruit-LevelShifter-TXB0108 | Module_Adafruit1 |
| 1 | Q_NMOS_DGS | TO_SOT_Packages_THT:TO-92_Molded_Narrow | Q1 |
| 1 | Q_NPN_BCE | TO_SOT_Packages_THT:TO-92_Molded_Narrow | Q2 |
| 1 | RELAY_2RT | Relays_ThroughHole:Relay_DPDT_IM0(3,6,7)NS | K2 |
| 1 | TME_1205S | Converters_DCDC_ACDC:DCDC-Conv_TRACO_TME05xx_TME12xx | Dc/Dc1 |
Similar boards
- 2 layers85 × 56.5 mm
- 2 layers100 × 60 mm
HVPowerModule
EPFLXplore/Power_HW
KiCad design files for the power boards of the Xplore rover.
105 parts7 - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers68.8 × 53.6 mm
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
46 parts269 - 2 layers152 × 88 mm
RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222 - 2 layers118 × 103.5 mm
- 2 layers113 × 62.2 mm
FullScope
tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen
15 parts165Apache-2.0
Questions
How big is the PIDDEF PCB?
It measures 85.7 × 137.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PIDDEF use?
95 parts, built around the TME 1205S, LM358 and ADUM1251ARZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PIDDEF KiCad files?
From the SNolasco86/ProjectosKiCad repository on GitHub, at the commit this page was made from: the board is PIDDEF/PIDDEF.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PIDDEF design in my own project?
Its repository states no licence, so its author keeps all rights: ask SNolasco86 before reusing the design.