

MECB Z80 CPU
- Size
- 99.8 × 99.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 93
- Pads
- 305
- Tracks, vias
- 1,728, 181
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Jul 2024
- Updated
- 25 Oct 2026
Overview
MECB Z80 CPU is an open-source printed circuit board by epaell, from the epaell/MECB repository on GitHub. It is a 2-layer board of 99.8 × 99.8 mm with 28 parts on 93 nets, routed with 1,728 tracks and 181 vias.
It is built around the ATF22V10C-15PU, 74HC670P-E and 74HC74D, with the AS6C4008-55PCN and TC1232CPA among its other parts. Its parts include 8 capacitors, 8 ICs, 2 connectors, 1 switch and 1 crystal. It belongs with the retro computing and games boards and the FPGA and CPLD boards of this library.
Main components
5ATF22V10C-15PU
PDIP-245V EEPLD PDIP-24 Programmable Logic Device (CPLDs/FPGAs) ROHSMicrochip TechnologyProgrammable Logic Device (CPLDs/FPGAs)74HC670P-E
DIP-16-40℃~+125℃ 16 21ns@4.5V,50pF 2V~6V 35mA 35mA 74HC Output enable Tri-State DIP-16 Shift Registers ROHSRenesas ElectronicsShift Registers74HC74D
SOIC-14-40℃~+125℃ 1 15ns 2 2V~6V 3.5pF 37ns@6V,50pF 3ns、3ns、3ns 40uA 5.2mA 5.2mA 74HC Series 82MHz Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSNexperiaFlip FlopsAS6C4008-55PCN
PDIP-320℃~+70℃ 2.7V~5.5V 30mA 4Mbit 4uA 55ns Parallel Port (Parallel) PDIP-32 SRAM ROHSAlliance MemorySRAMTC1232CPA
PDIP-8-40℃~+85℃@(Ta) 1 250ms 4.62V 4V~5.5V Active Low Open-drain、Push-pull Voltage monitor Watchdog timer、Manual reset input PDIP-8 Supervisor and Reset ICs ROHSMicrochip TechnologySupervisor And Reset ICs
README
SDCardShield/README.mdSDCardShield
A version of the SD Card shield that was originally developed by Corsham Technologies for the SWTPC. It has been modified to work with the MECB I/O board (PIA port) and makes use of Adafruit modules to implement the realtime clock:
https://core-electronics.com.au/adafruit-ds3231-precision-rtc-breakout.html
and microSD interface:
https://core-electronics.com.au/microsd-card-breakout-board.html
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 4K7 | Resistor_THT:R_Array_SIP9 | RN1, RN3 |
| 2 | 74HC670 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U6, U7 |
| 1 | 74HC74 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U8 |
| 1 | 8 MHz | Package_DIP:DIP-4-8_W7.62mm_Socket_LongPads | Y1 |
| 1 | AS6C4008-55 | Package_DIP:DIP-32_W15.24mm_Socket_LongPads | U3 |
| 1 | ATF22V10C-15PU | MyCustomFootprintLibrary:DIP-24_W7.62mm_Socket_LongPads_ZIF_Friendly | U1 |
| 1 | CLK_SEL | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | MECB_64AC | MyCustomFootprintLibrary:DIN41612_C_2x32_C64AC_Male_Horizontal_THT | J1 |
| 1 | SST39SF040 | Package_DIP:DIP-32_W15.24mm_Socket_LongPads | U2 |
| 1 | SW_DIP_PB | Button_Switch_THT:SW_Tactile_Straight_KSA0Axx1LFTR | SW1 |
| 1 | TC1232CPA | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U4 |
| 1 | Z84C00xxP | Package_DIP:DIP-40_W15.24mm_Socket_LongPads | U5 |
More from epaell/MECB
10- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers139.8 × 53.3 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers80 × 67.5 mm

Similar boards
- 2 layers208 × 110 mm

- 4 layers273 × 178 mm

Pico thing
markrvmurray/pico-thing
An 8-bit MC6809E / HD6309E single-board computer with a pair of Raspberry Pi Pico 2 (RP2350 / Pimoroni PGA2350) modules acting as intelligent bus peripherals, a 1–2 MB banked-RAM DAT/MMU, a 40-pin PATA hard-disk…
206 parts1BSD-2-Clause - 2 layers99.9 × 99.9 mm

- 2 layers216 × 150 mm

Motherboard-201
artemisamsx/artemisa
Schematics, PCB designs and HDL simulations to build a 8-bits MSX computer
106 parts67 - 4 layers160 × 100 mm

- 2 layers65.7 × 63 mm

Msx printer interface
tangent3D/msx_printer_interface
Low-cost printer cartridge for MSX models and FPGA implementations that do not feature a standard printer port
11 parts - 6 layers243.8 × 243.8 mm

Raven
agranlund/raven
Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack
237 parts87 - 2 layers99.8 × 99.8 mm

MECB Template 22V10
DigicoolThings/MECB
Minimalist Europe Card Bus (MECB). An 8-bit Retro Computing Modular System Bus for 8-bit Retro Enthusiast Experimentation.
7 parts24
Questions
How big is the MECB Z80 CPU PCB?
It measures 99.8 × 99.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MECB Z80 CPU use?
28 parts, built around the ATF22V10C-15PU, 74HC670P-E, 74HC74D and AS6C4008-55PCN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MECB Z80 CPU KiCad files?
From the epaell/MECB repository on GitHub, at the commit this page was made from: the board is MECB_Z80/MECB_Z80_CPU/MECB_Z80_CPU.kicad_pcb and its schematic 68008Tester/68008test.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MECB Z80 CPU design in my own project?
Its repository states no licence, so its author keeps all rights: ask epaell before reusing the design.