2 layers93 × 146 mm
Panelized pompe sap
ENACRobotique/elec
Dépôt des cartes électroniques de l'équipe ENAC Robotique
306 parts2
2 layers34.9 × 17 mm
Usb2uart
ENACRobotique/elec2Dépôt des cartes électroniques de l'équipe ENAC Robotique
- Size
- 34.9 × 17 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 30
- Pads
- 79
- Tracks, vias
- 147, 15
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Sep 2017
- Updated
- 12 Feb 2026
Overview
Usb2uart is an open-source printed circuit board by ENACRobotique, from the ENACRobotique/elec repository on GitHub. It is a 2-layer board of 34.9 × 17 mm with 15 parts on 30 nets, routed with 147 tracks and 15 vias.
It is built around the FT232RL and 74LVC1G04Z. Its parts include 5 resistors, 3 capacitors, 3 diodes, 2 ICs and 2 connectors.
Main components
2Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | LED | LED_SMD:LED_0603_1608Metric | D2, D3, D4 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 390 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 4.7u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C3 |
| 1 | 500 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 74LVC1G04 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Conn_01x06_Pin | Connector_Molex:Molex_PicoBlade_53047-0610_1x06_P1.25mm_Vertical | J2 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | USB-C_12pin | ENAC_robotique:USB-C_HRO_C-31-M-12 | J1 |
Questions
How big is the Usb2uart PCB?
It measures 34.9 × 17 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Usb2uart use?
15 parts, built around the FT232RL and 74LVC1G04Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb2uart KiCad files?
From the ENACRobotique/elec repository on GitHub, at the commit this page was made from: the board is 2026/usb2uart/usb2uart.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb2uart design in my own project?
Its repository states no licence, so its author keeps all rights: ask ENACRobotique before reusing the design.
More from ENACRobotique/elec
12- 2 layers146 × 110 mm
Useless box 2025
ENACRobotique/elec
Dépôt des cartes électroniques de l'équipe ENAC Robotique
108 parts2 - 2 layers75 × 69 mm
- 2 layers150 × 100 mm
CartePrincipaleRobot
ENACRobotique/elec
Dépôt des cartes électroniques de l'équipe ENAC Robotique
52 parts2 - 2 layers69 × 76 mm
Principal2019 elec
ENACRobotique/elec
Dépôt des cartes électroniques de l'équipe ENAC Robotique
43 parts2 - 2 layers52 × 66 mm
- 2 layers68 × 86 mm
- 2 layers87 × 78 mm
- 2 layers100 × 100 mm
CartePrincipaleR1
ENACRobotique/elec
Dépôt des cartes électroniques de l'équipe ENAC Robotique
27 parts2 - 2 layers54 × 51 mm
- 2 layers
- 2 layers70 × 75 mm
Max3232id breakout
ENACRobotique/elec
Dépôt des cartes électroniques de l'équipe ENAC Robotique
23 parts2
Similar boards
- 2 layers72.8 × 43.1 mm
Lizard
Pheeeeenom/360-Lizard-RE
This is a completely reverse engineered 360 Lizard. The ultimate xbox 360 flashing tool.
94 parts12GPL-3.0 - 2 layers83.5 × 97.5 mm
TeleprinterHat
MattisLind/teleprinterHat
A RaspberryPi HAT that interfaces a old school teleprinter
145 parts6 - 4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0 - 4 layers83.1 × 92.5 mm
- 2 layers101.6 × 137.4 mm
- 2 layers97 × 79.5 mm
MBRadioDual2
LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios
104 parts35Unlicense - 4 layers88.9 × 20.3 mm
- 2 layers25.4 × 78.2 mm
Sd board
w0ts/optimist
Optimist: an open, modular firmware platform for the M-VAVE FM-1 (from SLOOP / Felucca)
28 parts32GPL-3.0