Skip to the content
4 layers121 × 96 mmClaw Machine, the printed circuit board in 3D

Projet de machine à pince réalisé dans le cadre de l'Option Maker ENSEA 2025-2026.

Size
121 × 96 mm
Copper layers
4
Thickness
1.6 mm
Parts
92
Nets
154
Pads
466
Tracks, vias
21, 0
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
18 Jan 2026
Updated
12 May 2026

Overview

Claw Machine is an open-source printed circuit board by emiz-jh, from the emiz-jh/2526_Maker_ClawMachine repository on GitHub. It is a 4-layer board of 121 × 96 mm with 92 parts on 154 nets, routed with 21 tracks and 0 vias.

It is built around the TMC2225-SA-T, AZ1117CH2-3.3TRG1 and MFL0603R1100FB, with the S4B-XH-A(LF)(SN) among its other parts. Its parts include 32 resistors, 28 capacitors, 12 connectors, 8 diodes and 7 ICs.

Main components

4

README

README.md

2526_Maker_ClawMachine

Description du Projet

Dans le cadre de l'Option Maker 2025-2026 à l'ENSEA, mon projet est de concevoir une machine à pince (Claw Machine) miniature.

L'idée est de concevoir un système automatisé capable de déplacer une pince sur trois axes (X, Y, Z) pour saisir et relâcher des objets.

Sommaire

  1. Principe de réalisation
  2. Organisation du dépôt
  3. Rétro-planning

1. Principe de réalisation

Pour mener à bien ce projet, j'utiliserais différentes technologies de prototypage rapide qu'on va étudier en cours :

1.1 Conception Mécanique & Fabrication

  • Châssis (LASER) : Conception d'une structure externe légère et rigide via la découpeuse LASER.
  • Système d'axes (3D Print) : Déplacement X-Y-Z assuré par des rails et supports modélisés sur mesure et imprimés en 3D.
  • Pince motorisée : Assemblage de pièces imprimées en 3D actionnées par un servomoteur.

1.2 Électronique & Énergie

  • PCB : Conception d'un circuit imprimé pour centraliser le contrôle des moteurs, du joystick et du bouton.
  • Alimentation (LiPo) : Fabrication d'une alimentation avec un transformateur secteur vers 12V.

1.3 Gestion de projet & Livrables

  • Versionning (Git) : Utilisation de Git et GitHub pour le suivi du code source et des fichiers de conception.
  • Documentation : Reporting sur ce README.md.
  • Rendu final : Code source complet, fichiers de fabrication et vidéo de démonstration de 90 secondes.

2. Organisation du dépôt

  • Project_Management : Contient le suivi de projet, le journal de bord hebdomadaire, la to do list.
  • CAD : Plans de découpe LASER et modèles 3D (pince, supports, rails).
  • Hardware : Schémas électriques, fichiers de routage du PCB et liste des composants (BOM).
  • Software : Code source pour le pilotage des moteurs et la gestion des entrées utilisateur.
  • Livrables : Exercices de la première partie de l'option Maker.

3. La Vidéo

Vidéo :

La V2 améliorée avec effets et sous-titres:)) https://drive.google.com/file/d/1RBb7gfRtg3nFpQULt-ub-SjBEfwNZvmX/view?usp=sharing

Auteure : Emilie ZHENG

Encadrant : Nicolas PAPAZOGLOU

Parts

92
QtyValueFootprintReferences
8100nCapacitor_SMD:C_0402_1005MetricC503, C504, C507, C508, C602, C604, C702, C704
810kResistor_SMD:R_0402_1005MetricR503, R504, R602, R702, R801, R802, R803, R804
810uCapacitor_SMD:CP_Elec_4x5.7C501, C502, C505, C506, C601, C603, C701, C703
8680mResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR507, R508, R509, R510, R604, R605, R704, R705
7RED_LEDLED_SMD:LED_0603_1608MetricD202, D203, D204, D501, D502, D601, D701
5820Resistor_SMD:R_0402_1005MetricR204, R511, R512, R606, R706
4110mResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR501, R502, R601, R701
41k5Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR505, R506, R603, R703
422nCapacitor_SMD:C_0402_1005MetricC509, C510, C605, C705
44u7Capacitor_SMD:C_0402_1005MetricC511, C512, C606, C706
4Conn_01x02Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ801, J803, J804, J806
4Conn_01x04Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ501, J502, J601, J701
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH101, H102, H103, H104
4TMC2225-SA-TPackage_SO:HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x5.4mm_ThermalViasU501, U502, U601, U701
210uCapacitor_SMD:C_0402_1005MetricC201, C202
2Conn_01x05Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ802, J805
11000uCapacitor_SMD:CP_Elec_5x5.4C203
1100nCapacitor_SMD:C_0603_1608MetricC204
1173010542173010542:WPME-FDSM_173010X42U201
11kResistor_SMD:R_0805_2012MetricR201
11k6Resistor_SMD:R_0402_1005MetricR203
15k1Resistor_SMD:R_0402_1005MetricR202
1AZ1117CH2-3.3TRG1Package_TO_SOT_SMD:SOT-223-3_TabPin2U202
1Conn_01x02Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_VerticalJ201
1Conn_02x02_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical_SMDJ202
1D_Schottky_AAKLibrary:DST10100SD201
1NUCLEO_L476RGLibrary:ST_NUCLEO_64U801
1SW_SPDTLibrary:472121020311_bisSW201

More from emiz-jh/2526_Maker_ClawMachine

2
  • 4 layers65 × 30 mmHub USB, the printed circuit board in 3D

    Hub USB

    emiz-jh/2526_Maker_ClawMachine

    Projet de machine à pince réalisé dans le cadre de l'Option Maker ENSEA 2025-2026.

    45 parts1
  • 2 layers35 × 35 mmClaw Machine Interface, the printed circuit board in 3D

    Claw Machine Interface

    emiz-jh/2526_Maker_ClawMachine

    Projet de machine à pince réalisé dans le cadre de l'Option Maker ENSEA 2025-2026.

    11 parts1

Similar boards

  • 2 layers94 × 68.6 mmBilan PCB, the printed circuit board in 3D

    Bilan PCB

    AresEnsea/2324_Projet2A_AresCFR

    Ce repository GitHub regroupe l'ensemble des projets & documents réalisés par l'association Ares pour la Coupe de France de Robotique 2024 – Farming Mars.

    107 parts7
  • 2 layers106 × 33 mmStepper Driver TMC2225-SA Tx4, the printed circuit board in 3D

    Stepper Driver TMC2225-SA Tx4

    Arlausea/2324_Projet2A_Eve

    Upgrade of a robot arm to help disabled people in everyday life

    84 parts
  • 4 layers62 × 45 mmServo, the printed circuit board in 3D

    Servo

    theatrus/tsumikoro

    What if you made lots of spheres roll around?

    73 parts1
  • 2 layers143 × 78 mmSnekSafe, the printed circuit board in 3D

    SnekSafe

    USA-RedDragon/SnekSafe

    Keep your snek safe by controlling temperature and lighting.

    19 parts1MIT
  • 2 layers62 × 38.1 mmWater meter counter, the printed circuit board in 3D

    Water meter counter

    usimd/water-meter-counter

    Inductive water meter counting module for B-meters GSD8

    46 parts1
  • 4 layers100 × 106 mmDelivery robot 1, the printed circuit board in 3D

    Delivery robot 1

    ECE49022Team22/delivery-robot-pcb

    Delivery robot KiCad PCB project and reusable 3.3 V LDO module

    181 parts

Questions

How big is the Claw Machine PCB?

It measures 121 × 96 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Claw Machine use?

92 parts, built around the TMC2225-SA-T, AZ1117CH2-3.3TRG1, MFL0603R1100FB and S4B-XH-A(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Claw Machine KiCad files?

From the emiz-jh/2526_Maker_ClawMachine repository on GitHub, at the commit this page was made from: the board is Hardware/Claw_Machine/Claw_Machine.kicad_pcb and its schematic Hardware/Claw_Machine/Claw_Machine.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Claw Machine design in my own project?

Its repository states no licence, so its author keeps all rights: ask emiz-jh before reusing the design.