Skip to the content
2 layers143 × 78 mmSnekSafe, the printed circuit board in 3D

Keep your snek safe by controlling temperature and lighting.

Size
143 × 78 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
46
Pads
111
Tracks, vias
63, 2
Pours
45
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
13 May 2023
Updated
7 Nov 2026

Overview

SnekSafe is an open-source printed circuit board by USA-RedDragon, from the USA-RedDragon/SnekSafe repository on GitHub, published under the MIT licence. It is a 2-layer board of 143 × 78 mm with 19 parts on 46 nets, routed with 63 tracks and 2 vias.

It is built around the CPC40055ST and S4B-XH-A(LF)(SN). Its parts include 5 resistors, 3 connectors, 2 switches, 1 capacitor and 1 IC. It belongs with the lEDs and displays boards and the ESP32 boards of this library.

Main components

2

README

README.md

SnekSafe

Keep your snek safe by controlling temperature and lighting.

Assembled v1.1 Board

v1.1 assembled v1.1 assembled in enclosure

Board Renders

Board Top Board Bottom Board Enclosure

Schematic

Schematic

Board Layout

Board Layout

Site Images

Home Settings

Parts not in the BOM that you might need

Cost

The one-off BOM cost, assuming you have spade connectors and 14AWG wire on hand is $121.25.

On ESP32 choice

I chose the official ESP32-DevKitC-32E (ESP32-DevKitC V4) board due to quality. For some reason, on a cheaper NodeMCU ESP32S I was able to scan less WiFi networks and got a lower effective range.

Premade Carts

A few items, such as the C13 AC cord, the C14 AC plug, and the panel mount AC outlets must be sourced on your own, as DigiKey and Mouser don't sell these commonly.

JST XH Plug Parts

Mouser doesn't stock these: https://www.digikey.com/short/1hzrmn3b

Mouser

https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c3308da5f2

Parts

19
QtyValueFootprintReferences
22.4kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2
2422Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR5, R6
2CPC40055STCPC40055ST:CPC40055STK1, K2
2MountingHole_3.2mm_M3_Pad_ViaMountingHole:MountingHole_3.2mm_M3_Pad_ViaMH1, MH2
2MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaMH3, MH4
110kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR3
11uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1
1ESP32-DEVKITC-32DESP32-DEVKITC-32D:MODULE_ESP32-DEVKITC-32DU1
1InstructionsQR:rickrollQR*****
1LOGOsnek:snekG***
1RAC10E-05SK_277RAC10E-05SK_277:RAC10E05SK277PS1
1S4B-XH-A(LF)(SN)Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_HorizontalJ1
1Screw_Terminal_01x03Phoenix 1714968:1714968J3
1Screw_Terminal_01x06Phoenix 1713969:1713969J2

Similar boards

  • 4 layers100 × 72 mmEspSFDmains, the printed circuit board in 3D

    EspSFDmains

    chrissileinus/espSFD

    47 parts
  • 4 layers121 × 96 mmClaw Machine, the printed circuit board in 3D

    Claw Machine

    emiz-jh/2526_Maker_ClawMachine

    Projet de machine à pince réalisé dans le cadre de l'Option Maker ENSEA 2025-2026.

    92 parts1
  • 4 layers62 × 45 mmServo, the printed circuit board in 3D

    Servo

    theatrus/tsumikoro

    What if you made lots of spheres roll around?

    73 parts1
  • 2 layers62 × 38.1 mmWater meter counter, the printed circuit board in 3D

    Water meter counter

    usimd/water-meter-counter

    Inductive water meter counting module for B-meters GSD8

    46 parts1
  • 4 layers100 × 106 mmDelivery robot 1, the printed circuit board in 3D

    Delivery robot 1

    ECE49022Team22/delivery-robot-pcb

    Delivery robot KiCad PCB project and reusable 3.3 V LDO module

    181 parts
  • 2 layers43.4 × 42 mmLarge button, the printed circuit board in 3D

    Large button

    synthesissolutions/geeksforkids

    16 parts2

Questions

How big is the SnekSafe PCB?

It measures 143 × 78 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SnekSafe use?

19 parts, built around the CPC40055ST and S4B-XH-A(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SnekSafe KiCad files?

From the USA-RedDragon/SnekSafe repository on GitHub, at the commit this page was made from: the board is kicad/sneksafe.kicad_pcb and its schematic kicad/sneksafe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SnekSafe design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).