Skip to the content
2 layers55 × 60 mmController, the printed circuit board in 3D

uiuc ece445 senior design

Size
55 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
39
Nets
41
Pads
167
Tracks, vias
342, 154
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
7 May 2026
Updated
7 May 2026

Overview

Controller is an open-source printed circuit board by emilyliiuu, from the emilyliiuu/birdsimulator repository on GitHub. It is a 2-layer board of 55 × 60 mm with 39 parts on 41 nets, routed with 342 tracks and 154 vias.

It is built around the SX1280IMLTRT, CONMHF1-SMD-T and JS5208, with the NX2016SA-52MHZ-EXS00A-CS06016 among its other parts. Its parts include 14 capacitors, 6 connectors, 4 resistors, 3 ICs and 3 inductors. It belongs with the STM32 boards of this library.

Main components

4

Parts

39
QtyValueFootprintReferences
41uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC96, C97, C98, C99
4Conn_01x03_MaleConnector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_VerticalJA1, JE1, JR1, JT1
21.2pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC7, C10
2100nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC11, C13
210kResistor_SMD:R_0603_1608MetricR3, R4
210nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC8, C14
2Conn_01x02_FemaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J6
10.5pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC9
10.8pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5
1100pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC12
115uHInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL1
11kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
12.5nHInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderL3
1330Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2
13nHInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderL2
1470nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC6
1CONMHF1-SMD-TCONMHF1_SMD_T:CONN_CONMHF1-SMD_LNXJ5
1Conn_01x02Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_HorizontalJ4
1Conn_01x04_MaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_HorizontalLCD1
1Conn_01x04_MaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Conn_01x06_MaleConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ2
1JS5208joystick:SW_JS5208S1
1LEDLED_THT:LED_D3.0mmD1
1LT1129-3.3_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1NX2016SA-52MHZ-EXS00A-CS06016NX2016SA_52MHZ_EXS00A_CS06016:NX2016SA_NDKQ1
1STM32L031K6TxPackage_QFP:LQFP-32_7x7mm_P0.8mmU2
1SW_PushButton_Switch_THT:SW_PUSH_6mm_H4.3mmSW1
1SX1280IMLTRTSX1280IMLTRT:XCVR_SX1280IMLTRTU3

More from emilyliiuu/birdsimulator

5
  • 4 layers36 × 54 mmEsc, the printed circuit board in 3D

    Esc

    emilyliiuu/birdsimulator

    uiuc ece445 senior design

    89 parts
  • 2 layers50 × 60 mmBird suit main, the printed circuit board in 3D

    Bird suit main

    emilyliiuu/birdsimulator

    uiuc ece445 senior design

    45 parts
  • 2 layers28 × 48 mmDrone FC, the printed circuit board in 3D

    Drone FC

    emilyliiuu/birdsimulator

    uiuc ece445 senior design

    43 parts
  • 2 layers28 × 28 mmVideo transmitter, the printed circuit board in 3D

    Video transmitter

    emilyliiuu/birdsimulator

    uiuc ece445 senior design

    36 parts
  • 2 layers39 × 30 mmBird suit gyros, the printed circuit board in 3D

    Bird suit gyros

    emilyliiuu/birdsimulator

    uiuc ece445 senior design

    5 parts

Similar boards

  • 4 layersBLE MIOTY MODULE, the printed circuit board in 3D

    BLE MIOTY MODULE

    Chandubreddy819/Bluetooth-and-Mioty-Localization-Hardware

    A coin-cell-powered asset-tracking module that shares a single 2.4 GHz radio (Semtech SX1280) between two protocols: frequent BLE/Google FMDN advertisements for precise short-range tracking, and periodic mioty (TS-UNB)…

    59 parts1
  • 4 layers130 × 40 mmPumaTX MB HW00, the printed circuit board in 3D

    PumaTX MB HW00

    PumaFPV/PumaTX

    DIY FPV Remote controller based on the one from the mavic

    121 parts4MIT
  • 4 layers76.9 × 67.3 mmTerra HW, the printed circuit board in 3D

    Terra HW

    jamesmendel/terra-nova

    Terra 2.0 Firmware and Hardware

    95 parts2GPL-3.0
  • 6 layers22 × 80 mmM2SmartHome, the printed circuit board in 3D

    M2SmartHome

    lukasznowarkiewicz/M2SmartHome

    Setting up a smart home hub, such as running Home Assistant, often requires hardware with sufficient performance and connectivity options.

    257 parts2
  • 2 layers69 × 56.8 mmBeal TX, the printed circuit board in 3D

    Beal TX

    anobli/beal-hw

    Kicad project for a Lora valves controller

    93 partsCERN-OHL-S-2.0
  • 6 layers160 × 100 mmAwohali, the printed circuit board in 3D

    Awohali

    DeepSpace00/Awohali

    An open soure GNSS station for flash flood nowcasting

    556 parts
  • 4 layers204.7 × 68.5 mmMain v2, the printed circuit board in 3D

    Main v2

    JaxRaffnix/sdr-analog-frontend

    201 parts
  • 4 layers85 × 100 mmTrailtrack, the printed circuit board in 3D

    Trailtrack

    lead-afk/TrailTrack-pub

    128 parts

Questions

How big is the Controller PCB?

It measures 55 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Controller use?

39 parts, built around the SX1280IMLTRT, CONMHF1-SMD-T, JS5208 and NX2016SA-52MHZ-EXS00A-CS06016. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Controller KiCad files?

From the emilyliiuu/birdsimulator repository on GitHub, at the commit this page was made from: the board is controller/hardware/controller.kicad_pcb and its schematic bird_suit/hardware/bird suit gyros/bird suit gyros.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask emilyliiuu before reusing the design.