Skip to the content
4 layers98.5 × 122.4 mmVbench pod, the printed circuit board in 3D

An open hardware bench tool that plugs into your CI: sensor sim, CAN, analog I/O, power control, and a Python SDK with pytest integration

Size
98.5 × 122.4 mm
Copper layers
4
Thickness
1.61 mm
Parts
335
Nets
274
Pads
1,209
Tracks, vias
4,060, 1,077
Pours
15
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Jun 2026
Updated
7 Nov 2026

Overview

Vbench pod is an open-source printed circuit board by embeddedci-com, from the embeddedci-com/benchpod repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 4-layer board of 98.5 × 122.4 mm with 335 parts on 274 nets, routed with 4,060 tracks and 1,077 vias.

It is built around the ICE40UP5K-SG48ITR50, STM32H563ZGT6 and LAN8742AI-CZ-TR, with the TCAN1044VDRBRQ1, INA226AIDGSR and TPS62130RGTRF0 among its other parts. Its parts include 147 capacitors, 125 resistors, 31 ICs, 9 diodes and 8 connectors. It belongs with the STM32 and FPGA and CPLD boards of this library.

Main components

12

README

README.md

BenchPod

NOTE1: Some tagged versions will have obvious mistakes in them, but as those got built, they're in the repo for historical reasons.

NOTE2: Don't build these boards yourself without any necessary changes. The current tagged versions are not production-ready yet.

An open hardware bench tool with sensor sim, CAN, analog I/O, and power control, with a Python SDK and pytest integration.

Embedded teams often end up with a bench full of equipment that's hard to share, hard to automate, and difficult to use remotely. Setting up tests often means being physically present, and that doesn't scale well across a team.

BenchPod is an attempt to make that easier. One board with sensor simulation over I2C and SPI, CAN bus, analog input and output, programmable power control, a logic analyzer, and an FPGA for fast protocol mocking, connected over WiFi so it can be shared across a team or accessed remotely. A Python SDK and pytest integration make it straightforward to go from manual bench work to automated tests without changing your setup.

This repo contains the KiCad source files for the board, plus the SPICE simulations used while designing the analog front ends.


What's in this repo

text
pcb/
  benchpod/                      # KiCad project for the analog + digital board
    vbench-pod.kicad_pro         #   KiCad project file
    vbench-pod.kicad_pcb         #   PCB layout
    vbench-pod.kicad_sch         #   Top-level schematic
    analog-power-v2.kicad_sch    #   Analog supply rails
    analog-switching.kicad_sch   #   Analog signal routing / muxing
    analog-to-digital-v2.kicad_sch  # ADC front end
    digital-to-analog-v2.kicad_sch  # DAC output stage
    LogicAnalyzer.kicad_sch      #   Logic analyzer
    power.kicad_sch              #   Power control
    ethernet.kicad_sch           #   Ethernet
    usb.kicad_sch                #   USB
    fp-lib-table                 #   Footprint library references
    sym-lib-table                #   Symbol library references
  benchpod-digital/              # KiCad project for the digital-only board (same sheet layout)
  libs/                          # Shared symbol, footprint, and 3D-model libraries

spice/                           # LTspice / ngspice simulations for the analog front ends
  adc-v1/  adc-v2/  dac-v2/

Library paths in fp-lib-table, sym-lib-table, and the PCB are stored relative to the project (${KIPRJMOD}/..), so the project opens in KiCad straight after cloning.


Which board do I have?

The board name is printed on the silkscreen (for example "BenchPod v3-r1"). Find it in the table below to get the git tag with the exact design files for your board:

SilkscreenBoardTagKiCad projectWhat changed
BenchPod v3Analog + digitalanalog-v3pcb/benchpodFirst v3 board. STM32H563ZIT6, INA238 current monitors.
BenchPod v3-DigitalDigital onlydigital-v3pcb/benchpod-digitalFirst digital-only board: the v3 without the analog section. STM32H563ZGT6 (1 MB flash), INA226 current monitors.
BenchPod v3-r1Analog + digitalanalog-v3r1pcb/benchpodSTM32H563ZGT6 and INA226 like the digital board. Monitors the pod's own current (INA226 at 0x41). The 5.5 V analog rail comes from a 7 V boost instead of the 14 V rail, so U50 no longer runs hot. TPS65131 compensation caps fixed. THS4551 and TPS7A2050 in their smaller packages (RUN, DQN).
BenchPod v3r2-DigitalDigital onlydigital-v3r2pcb/benchpod-digitalMonitors the pod's own current (INA226 at 0x41).
BenchPod v3-r2Analog + digitalanalog-v3r2pcb/benchpodOne DAC8554 quad DAC (a channel per output) replaces the DAC8551 and its two TMUX1104 muxes. The ±14 V supply starts off and the firmware switches it on. 0.1 % resistors around the ADC driver for a smaller zero offset between pods. Fixed 9.1 pF ADC compensation instead of the trimmer. SWD and USART2 on DNP 2x2 headers instead of H1-H3. More ESD clamps (USB CC, +1V8, LA_VCCIO, the 0-5 V SMA). Board revision strap 2.70 V.
BenchPod v3r3-DigitalDigital onlydigital-v3r3pcb/benchpod-digital24-pin FFC connector (CN1) for the analog module. The module 5 V and the USB-A bridge 5 V are switched by SY6280AAC power switches, with TVS diodes on the 5 V outputs. 3.3 V buck becomes a TPS62130A with a 2.2 uH inductor. PSRAM in SOP-8. Ethernet EMI changes from the Microchip and TI reference designs: RJ45 chassis ground straight to GND, center taps fed through a 0 ohm resistor, 8.2 pF on the four data lines, a flow-through TPD4E05U06 ESD clamp. 100 nF + 470 pF at the J4, J5 and J6 terminals. Connectors placed for the enclosure.
BenchPod v3-r3-analogAnalog moduleanalog-v3r3pcb/benchpod-analogFirst analog module: the analog section on its own board, connected to the v3r3 digital board by a 24-pin FFC (CN1). Front-panel connectors for the enclosure: a lead-free BNC for the ADC input (ready for 10x probes), pluggable terminal blocks for the DAC outputs (one 6-pin block) and the 4-20 mA loop. Module ID EEPROM. +3V3 from an AP2112K-3.3.

To get the files for your board, check out its tag:

text
git checkout analog-v3r1

Every tag holds all KiCad projects; use the folder from the table. Older boards: v1.0.0 and v1.0.1 are v1, v2.0.0 is v2.

The v3 tags used to be named v3.0.0 (now analog-v3), v3.0.1-digital (now digital-v3), v3.0.1-analog (now analog-v3r1) and v3.0.2-digital (now digital-v3r2).

One firmware runs on all v3 boards. The pod's own current needs firmware newer than 3.5.1. The v3-r2 board needs firmware newer than 3.9.4: older firmware runs it as a v3-r1 and its DAC outputs and ±12 V stay off.


License

Hardware (schematics, PCB layout) is released under CERN OHL-W v2.

Parts

335
QtyValueFootprintReferences
73100nCapacitor_SMD:C_0402_1005MetricC1, C10, C11, C13, C14, C101, C109, C112, C113, C114, C116, C118, C120, C121, C124, C125 +57
4810kResistor_SMD:R_0402_1005MetricR12, R14, R17, R137, R139, R142, R143, R149, R156, R157, R163, R178, R179, R183, R186, R190 +32
271uCapacitor_SMD:C_0402_1005MetricC17, C19, C24, C107, C110, C111, C115, C117, C217, C222, C235, C236, C237, C238, C239, C240 +11
17330Resistor_SMD:R_0402_1005MetricR42, R43, R44, R45, R46, R47, R48, R49, R54, R55, R56, R57, R87, R140, R141, R174 +1
1210uCapacitor_SMD:C_0603_1608MetricC21, C28, C66, C93, C95, C100, C106, C122, C123, C257, C263, C269
1133Resistor_SMD:R_0402_1005MetricR23, R24, R25, R27, R81, R82, R90, R92, R93, R94, R95
84.7kResistor_SMD:R_0402_1005MetricR26, R31, R38, R50, R180, R187, R193, R194
84.7uCapacitor_SMD:C_0805_2012MetricC2, C3, C5, C62, C63, C64, C65, C220
88.2pCapacitor_SMD:C_0402_1005MetricC29, C30, C50, C51, C273, C274, C275, C276
60Resistor_SMD:R_0402_1005MetricR2, R16, R19, R150, R160, R196
510nCapacitor_SMD:C_0402_1005MetricC104, C105, C228, C258, C259
549.9Resistor_SMD:R_0402_1005MetricR1, R145, R146, R147, R148
5SN74LVC2G66DCURlcsc:VSSOP-8_L2.1-W2.4-P0.50-LS3.2-BRU18, U19, U20, U21, U24
5SRV05-4.TCTlcsc:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BRU22, U23, U25, U28, U34
41kResistor_SMD:R_0402_1005MetricR21, R22, R164, R175
422uCapacitor_SMD:C_0805_2012MetricC91, C92, C103, C108
43.3nCapacitor_SMD:C_0402_1005MetricC99, C102, C119, C226
4470pCapacitor_SMD:C_0402_1005MetricC46, C278, C280, C282
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5_Pad_ViaH10, H11, H12, H14
3100kResistor_SMD:R_0402_1005MetricR86, R151, R152
32.2kResistor_SMD:R_0402_1005MetricR58, R62, R195
3DB2ERC-3.81-2P-BKlcsc_footprints:C5259145_CONN-TH_2P-P3.81_DB2ERC-3.81-2P-BKJ4, J5, J6
3INA226AIDGSRlcsc:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BLU29, U33, U35
3TPS259470ARPWRlcsc:VQFN-10_L2.0-W2.0-P0.45-TLU26, U27, U57
22.2uCapacitor_SMD:C_0603_1608MetricC218, C219
230mResistor_SMD:R_2512_6332MetricR83, R138
25.1kResistor_SMD:R_0402_1005MetricR75, R76
256Resistor_SMD:R_0402_1005MetricR18, R176
26pF ±10ppm SMD2016-4P Crystals - 25MhzCrystal:Crystal_SMD_2016-4Pin_2.0x1.6mmY1, Y2
2AF 90° WJDGlcsc_footprints:C456018_USB-A-TH_AF-WJDGUSB1, USB2
2Conn_02x02_Counter_ClockwiseConnector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_VerticalJ10, J11
2FerriteBeadlcsc_footprints:C85833_L0603FB2, FB3
2SMAJ5.0Alcsc:SMA_L4.3-W2.6-LS5.0-RDD23, D24
2SMAJ5.0A_C2925443lcsc:SMA_L4.3-W2.6-LS5.0-RDD1, D22
2SY6280AAClcsc_footprints:C55136_SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BLU59, U60
2TCA9554PWRlcsc:TSSOP-16_L5.0-W4.4-P0.65-LS6.4-TLU54, U56
2TS24CAlcsc_footprints:C393942_SW-SMD_2P-TS24CASW1, SW2
11.10kResistor_SMD:R_0402_1005MetricR80
11.5kResistor_SMD:R_0402_1005MetricR15
11.65kResistor_SMD:R_0402_1005MetricR79
11.8MResistor_SMD:R_0402_1005MetricR70
1100Resistor_SMD:R_0402_1005MetricR177
1105kResistor_SMD:R_0402_1005MetricR71
112.1kResistor_SMD:R_0402_1005MetricR144
1150kResistor_SMD:R_0603_1608MetricR155
12.2ulcsc_footprints:C167869_IND-SMD_L4.0-W4.0_FNR40XXSL1
120mResistor_SMD:R_2512_6332MetricR84
1316kResistor_SMD:R_0402_1005MetricR85
137.4kResistor_SMD:R_0402_1005MetricR67
149.9kResistor_SMD:R_0603_1608MetricR154
1510kResistor_SMD:R_0603_1608MetricR153
1820Resistor_SMD:R_0603_1608MetricR158
1AP2112K-1.2lcsc:SOT-25_L3.0-W1.6-P0.95-LS2.8-BRU31
1AP2112K-1.8TRG1lcsc:SOT-25_L3.0-W1.6-P0.95-LS2.8-BLU52
1AP2112K-2.5TRG1lcsc:SOT-25-5U32
1APS6404L-3SQR-SNlcsc_footprints:C5333729_SOIC-8_L4.9-W3.9-P1.27-LS6.0-BLU7
1HR911105A_C12074lcsc:RJ45-TH_HR911105AJ7
1ICE40UP5K-SG48ITRlcsc:QFN-48_L7.0-W7.0-P0.50-TL-EP5.4-1U1
1KH-FPC1.0-H2.0SMT-24P-QCHFlcsc_footprints:C5123103_FPC-SMD_24P-P1.00_KH-FPC1.0-H2.0SMT-24P-QCHFCN1
1LAN8742AI-CZ-TRlcsc:VQFN-24_L4.0-W4.0-P0.50-BL-EP2.5U6
1P4-1204RGBWS2-1.5T-Alcsc_footprints:C2827295_LED-SMD_4P-L3.2-W1.5_P4-1204RGBWS2-1.5T-ALED1
1SMAJ22CAlcsc_footprints:C41376408_SMA_L4_3-W2_6-LS5_2-RDD5
1SS34lcsc:SMA_L4.3-W2.6-LS5.2-RDD3
1STM32H563ZGT6lcsc:LQFP-144_L20.0-W20.0-P0.50-LS22.0-TLU5
1SX3M48.000B10F20TNNlcsc:OSC-SMD_4P-L3.2-W2.5-BLX1
1TCAN1044VDRBRQ1lcsc:VSON-8_L3.0-W3.0-P0.65-BR-EPU10
1TPD4E05U06DQARlcsc_footprints:C138714_USON-10_L2.5-W1.0-P0.50-BLD4
1TPS2116DRLRlcsc:SOT-583-8_L2.1-W1.6-P0.50-LS1.6-BLU8
1TPS62130RGTRlcsc_footprints:C337502_VQFN-16_L3_0-W3_0-P0_50-BL-EP1_7U30
1TYPE-C-31-M-12lcsc:USB-C_SMD-TYPE-C-31-M-12_1USBC1
1USBLC6-4SC6lcsc:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BLD11
1W25Q64JVSSIQlcsc:SOIC-8_L5.3-W5.3-P1.27-LS8.0-BLU2
1X9555WR-2x13-6TV01lcsc_footprints:C2682221_CONN-TH_X9555WR-2X13-6TV01J1

More from embeddedci-com/benchpod

2
  • 4 layers100 × 90 mmVbench pod, the printed circuit board in 3D

    Vbench pod

    embeddedci-com/benchpod

    An open hardware bench tool that plugs into your CI: sensor sim, CAN, analog I/O, power control, and a Python SDK with pytest integration

    536 parts2CERN-OHL-W-2.0
  • 4 layers98.5 × 120.2 mmVbench pod, the printed circuit board in 3D

    Vbench pod

    embeddedci-com/benchpod

    An open hardware bench tool that plugs into your CI: sensor sim, CAN, analog I/O, power control, and a Python SDK with pytest integration

    247 parts2CERN-OHL-W-2.0

Similar boards

  • 4 layers80 × 60 mmKcell faker, the printed circuit board in 3D

    Kcell faker

    karlp/kcell-faker

    fake a load cell, for testing functional behaviour with changing loads.

    75 parts
  • 4 layers58.6 × 75.3 mmSTM32H755 Devboard, the printed circuit board in 3D

    STM32H755 Devboard

    Pln3appl3/STM32H755_Devboard

    A custom devboard using the STM32H755 chip that I built to be used to prototype and test complex robotics machines I plan to build in the future and consists of MicroSD card slot, CAN-FD inbuilt, USB-C, SWD Debug…

    103 partsMIT
  • 4 layers42 × 22 mmAilink, the printed circuit board in 3D

    Ailink

    Huanfiy/ailink-pcb

    86 parts
  • 8 layers217.5 × 187.5 mmBoard c openroute partial, the printed circuit board in 3D

    Board c openroute partial

    ajisrawi/passive-radar-counter-drone

    Passive radar for counter-drone using DVB-T, 4G and 5G: simulation, receiver hardware, FPGA micro-Doppler firmware, antennas, enclosure

    314 parts3
  • 4 layers110 × 80 mmEsp32p4 extreme, the printed circuit board in 3D

    Esp32p4 extreme

    Andreuxxx1977/esp32-p4

    An open-hardware, actively cooled ESP32-P4 board for heavy multimedia work: a 2-lane MIPI camera, a 2-lane MIPI display, USB 2.0 High-Speed, 10/100 Ethernet, UHS-I microSD, 32 MB flash and 32 MB PSRAM.

    234 parts1CERN-OHL-P-2.0
  • 6 layers120.8 × 123.8 mmSocket370-motherboard, the printed circuit board in 3D

    Socket370-motherboard

    alphaonex86/FPGAmotherboard

    KiCad files of motherboards for original x86 CPUs, where an FPGA is the whole chipset: network-virtualised hard disk, NIC, a BIOS, no VGA.

    358 partsGPL-3.0
  • 2 layers20.3 × 63.5 mmIce40-up5k breakout, the printed circuit board in 3D

    Ice40-up5k breakout

    ikskuh/ice40-up5k-breakout

    A breakout board for the ICE40 UP5K FPGA suitable for breadboarding

    31 parts
  • 4 layers50 × 47.9 mmFPGA DevBoard, the printed circuit board in 3D

    FPGA DevBoard

    Jaboct/FPGA_DevBoard

    FPGA Development Board

    100 parts

Questions

How big is the Vbench pod PCB?

It measures 98.5 × 122.4 mm and has 4 copper layers, 1.61 mm thick.

What parts does the Vbench pod use?

335 parts, built around the ICE40UP5K-SG48ITR50, STM32H563ZGT6, LAN8742AI-CZ-TR and TCAN1044VDRBRQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Vbench pod KiCad files?

From the embeddedci-com/benchpod repository on GitHub, at the commit this page was made from: the board is pcb/benchpod-digital/vbench-pod.kicad_pcb and its schematic pcb/benchpod-analog/LogicAnalyzer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Vbench pod design in my own project?

Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).