
XIAO ePaper Display Board EE04 V1.2
doug-harriman/E-Display
Electronic display for calendars, weather, etc.

Ailink is an open-source printed circuit board by Huanfiy, from the Huanfiy/ailink-pcb repository on GitHub. It is a 4-layer board of 42 × 22 mm with 86 parts on 101 nets, routed with 1,620 tracks and 225 vias.
It is built around the STM32F446RET6, W25Q64JVSSIQ and TPS2553DBVR-1, with the AP2112K-3.3TRG1, CC0402KRX7R7BB104 and RC0402JR-0710KL among its other parts. Its parts include 38 resistors, 18 capacitors, 13 diodes, 6 connectors and 5 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 220 | ailink:Product_R_0402_1005Metric | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +1 |
| 11 | 100nF | ailink:Product_C_0402_1005Metric | C3, C4, C5, C6, C9, C12, C14, C15, C16, C17, C18 |
| 7 | 10k | ailink:Product_R_0402_1005Metric | R4, R5, R7, R8, R9, R31, R38 |
| 5 | SRV05-4 | ailink:Product_SOT-23-6 | D2, D3, D4, D5, D6 |
| 4 | 1.3k | ailink:Product_R_0402_1005Metric | R32, R33, R34, R35 |
| 2 | 150 | ailink:Product_R_0402_1005Metric | R28, R29 |
| 2 | 18pF | ailink:Product_C_0603_1608Metric | C10, C11 |
| 2 | 1uF | ailink:Product_C_0603_1608Metric | C1, C8 |
| 2 | 2.2uF | ailink:Product_C_0603_1608Metric | C2, C7 |
| 2 | 5.1k | ailink:Product_R_0402_1005Metric | R1, R2 |
| 2 | TPS2553DBVR | ailink:Product_SOT-23-6 | U4, U5 |
| 1 | 0 | ailink:Product_R_0402_1005Metric | R6 |
| 1 | 10nF | ailink:Product_C_0603_1608Metric | C13 |
| 1 | 147k | ailink:Product_R_0402_1005Metric | R37 |
| 1 | 16MHz 3225 CL=12pF | ailink:Product_Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | 1M | ailink:Product_R_0402_1005Metric | R3 |
| 1 | 1k | ailink:Product_R_0402_1005Metric | R30 |
| 1 | 226k | ailink:Product_R_0402_1005Metric | R36 |
| 1 | 620 | ailink:Product_R_0402_1005Metric | R27 |
| 1 | 750mA PTC | ailink:Product_Fuse_1206_3216Metric | F1 |
| 1 | AP2112K-3.3 | ailink:Product_SOT-23-5 | U3 |
| 1 | CONSOLE | ailink:Console_1x03_P1.27mm | J5 |
| 1 | FACTORY | ailink:Service_2x03_P1.27mm | J6 |
| 1 | FB 600R@100MHz | ailink:Product_L_0603_1608Metric | FB1 |
| 1 | GPIO_0_3 | ailink:Product_PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | GPIO_4_7 | ailink:Product_PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | LED_A_RX | ailink:Product_LED_0603_1608Metric | D11 |
| 1 | LED_A_TX | ailink:Product_LED_0603_1608Metric | D10 |
| 1 | LED_B_RX | ailink:Product_LED_0603_1608Metric | D13 |
| 1 | LED_B_TX | ailink:Product_LED_0603_1608Metric | D12 |
| 1 | PWR_LED_GREEN | ailink:Product_LED_0603_1608Metric | D9 |
| 1 | RGB_CA | ailink:Product_LED_RGB_1210 | D8 |
| 1 | SMAJ5.0A | ailink:Product_D_SMA | D7 |
| 1 | STM32F446RET6 | ailink:Product_LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TARGET_2x6_STRADDLE | ailink:Header_2x06_P2.54mm_Straddle | J2 |
| 1 | USBLC6-2SC6 | ailink:Product_SOT-23-6 | D1 |
| 1 | USB_C_16P | ailink:Product_USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | USB_DM | ailink:Product_TestPoint_Pad_D1.0mm | TP7 |
| 1 | USB_DP | ailink:Product_TestPoint_Pad_D1.0mm | TP6 |
| 1 | VBUS | ailink:Product_TestPoint_Pad_D1.0mm | TP1 |
| 1 | W25Q64JVSSIQ | ailink:Product_SOIC-8_5.3x5.3mm_P1.27mm | U2 |

doug-harriman/E-Display
Electronic display for calendars, weather, etc.


o7-machinehum/flipper-blackhat
Linux based WiFi pentesting device for the Flipper Zero.



Matthew-Bon/moon_child
A rocket flight computer to support CBJAMO's amoral interests.

chilly23/PCBGolf-master-Comma.ai
Compact PCB studies for the comma.ai PCBGolf challenge, including KiCad and EasyEDA designs, BOMs, STEP models, and routing-status reports.

ulyssecrn/PCBGolf
comma.ai PCBGolf entry: 4-port CAN-FD dev board on a 35 × 43 mm, 4-layer PCBA. KiCad 10.
It measures 42 × 22 mm and has 4 copper layers, 1.6 mm thick.
86 parts, built around the STM32F446RET6, W25Q64JVSSIQ, TPS2553DBVR-1 and AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Huanfiy/ailink-pcb repository on GitHub, at the commit this page was made from: the board is hardware/ailink.kicad_pcb and its schematic hardware/ailink.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Huanfiy before reusing the design.