4 layers38.9 × 37.5 mm
Overview
The STM32F446RET6 is a microcontroller made by STMicroelectronics in a LQFP-64(10x10) package with 64 pins. -40℃~+85℃ 1.7V~3.6V 128KB 12bit 12bit 180MHz 32 Bit 50 512KB ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32F4:STM32F446RETx, from KiCad's library) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. 389 are in stock at JLCPCB (part C69336). 44 open-source boards in 31 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
18- Supply, least
- 1.7 V · VDD, recommended operating min; external supervisor required at 1.7 V · p. 77
- Supply, most
- 3.6 V · VDD, recommended operating max · p. 77
- Supply, most
- 2.4 V · VDDA, recommended operating max; ADC limited to 1.2 MSPS · p. 77
- Supply, least
- 2.4 V · VDDA, recommended operating min; ADC limited to 2.4 MSPS · p. 77
- Supply, least
- 1.65 V · VBAT, recommended operating min · p. 77
- Supply, least
- 3 V · VDDUSB, recommended operating min; USB used · p. 77
- Supply, absolute maximum
- 4 V · VDD, VDDA, VDDUSB and VBAT absolute max · p. 74
- Works from
- -40 °C · ambient min, suffix 6, maximum power dissipation · p. 77
- Works up to
- 85 °C · ambient max, suffix 6, maximum power dissipation · p. 77
- Works up to
- 105 °C · ambient max, suffix 6, low power dissipation; TJ must not exceed TJmax · p. 77
- Junction, hottest
- 105 °C · junction operating max, suffix 6 · p. 77
- Junction, hottest
- 125 °C · junction absolute max · p. 75
- Takes working
- 72 mA · typical run, 180 MHz, external clock, PLL ON, peripherals enabled, ART enabled except prefetch · p. 83
- Takes at most
- 125 mA · max run, 180 MHz, 105 °C, peripherals enabled, ART enabled with prefetch · p. 84
- Takes asleep
- 2.03 µA · typical standby, 3.3 V, 25 °C, backup SRAM OFF, RTC and LSE OFF · p. 90
- A pin gives at most
- 25 mA · absolute max sink current per I/O or control pin · p. 75
- Junction to air (LQFP64 - 10 × 10 mm)
- 46 K/W · junction-to-ambient thermal resistance · p. 195
- A pin gives at most
- 20 mA · GPIO source or sink max, relaxed VOL/VOH, except PC13 to PC15 · p. 120
What it is and has
17- Core
- ARM 32-bit Cortex-M4 CPU with FPU · p. 1
- Flash memory
- 512 kB · p. 1
- SRAM
- 128 KB · p. 1
- Quad SPI
- Dual mode · p. 1
- LCD interface
- Parallel, 8080/6800 modes · p. 1
- Power supervision
- POR, PDR, PVD and BOR · p. 1
- External crystal oscillator
- 4-to-26 MHz · p. 1
- Low-power modes
- Sleep, Stop and Standby · p. 1
- ADC
- 3 × 12-bit, 2.4 MSPS; family supports up to 24 channels · p. 1
- DAC
- 2 × 12-bit · p. 1
- DMA
- 16 streams, FIFOs and burst support · p. 1
- Debug interface
- SWD and JTAG · p. 1
- Trace
- Cortex-M4 Trace Macrocell · p. 1
- Unique ID
- 96-bit · p. 1
- CRC
- CRC calculation unit · p. 1
- Maximum core frequency
- 180 MHz · p. 1
- Package option
- LQFP64 (10 × 10mm) · p. 1
Around it
3- cap 4.7 µF
- between VCAP and VSS; For a package with a single VCAP pin; ESR <1 Ω. The supplied pages do not identify which VCAP pin the LQFP64 exposes. · p. 79
- cap 2.2 µF
- between VCAP_1 and VSS; External ceramic regulator stabilization capacitor for a package with two VCAP pins; ESR <2 Ω. · p. 79
- diode Schottky
- between analog pin and ground; Recommended for analog pins that may inject negative currents. · p. 117
Specifications
565| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage (including VDDA, VDD, VDDUSB and VBAT) VDD–VSS | min -0.3 · max 4 V | 74 | |
| Input voltage on TTa pins VIN | max 4 V | 74 | |
| Input voltage on any other pin VIN | max 4 V | 74 | |
| Input voltage on BOOT0 pin VIN | max 9 V | 74 | |
| Variations between different VDD power pins |ΔVDDx| | max 50 mV | 74 | |
| Variations between all the different ground pins |VSSX −VSS| | max 50 mV | 74 | |
| Total current into sum of all VDD power lines (source) ΣIVDD | max 240 mA | 75 | |
| Total current out of sum of all VSS ground lines (sink) Σ IVSS | max -240 mA | 75 | |
| Total current into VDDUSB power line (source) Σ IVDDUSB | max 25 mA | 75 | |
| Maximum current into each VDD power pin (source) IVDD | max 100 mA | 75 | |
| Maximum current out of each VSS ground pin (sink) IVSS | max -100 mA | 75 | |
| Output current sunk by any I/O and control pin IIO | max 25 mA | 75 | |
| Output current sourced by any I/Os and control pin IIO | max -25 mA | 75 | |
| Total output current sunk by sum of all I/Os and control pins ΣIIO | max 120 mA | 75 | |
| Total output current sunk by sum of all USB I/Os ΣIIO | max 25 mA | 75 | |
| Total output current sourced by sum of all I/Os and control pins ΣIIO | max -120 mA | 75 | |
| Storage temperature range TSTG | min -65 · max 150 °C | 75 | |
| Maximum junction temperature TJ | max 125 °C | 75 | |
| Internal AHB clock frequency fHCLK | Power Scale 3, PWR_CR VOS[1:0] = 0x01, regulator ON, over-drive OFF | min 0 · max 120 MHz | 76 |
| Internal AHB clock frequency fHCLK | Power Scale 2, PWR_CR VOS[1:0] = 0x10, regulator ON, over-drive OFF | max 144 MHz | 76 |
| Internal AHB clock frequency fHCLK | Power Scale 2, PWR_CR VOS[1:0] = 0x10, regulator ON, over-drive ON | max 168 MHz | 76 |
| Internal AHB clock frequency fHCLK | Power Scale 1, PWR_CR VOS[1:0] = 0x11, regulator ON, over-drive OFF | max 168 MHz | 76 |
| Internal AHB clock frequency fHCLK | Power Scale 1, PWR_CR VOS[1:0] = 0x11, regulator ON, over-drive ON | max 180 MHz | 76 |
| Internal APB1 clock frequency fPCLK1 | Over-drive OFF | min 0 · max 42 MHz | 76 |
| Internal APB1 clock frequency fPCLK1 | Over-drive ON | min 0 · max 45 MHz | 76 |
| Internal APB2 clock frequency fPCLK2 | Over-drive OFF | min 0 · max 84 MHz | 76 |
| Internal APB2 clock frequency fPCLK2 | Over-drive ON | min 0 · max 90 MHz | 76 |
| Standard operating voltage VDD | 1.7 V requires an external power supply supervisor | min 1.7 · max 3.6 V | 77 |
| Analog operating voltage (ADC limited to 1.2 M samples) VDDA | Must be the same potential as VDD; 1.7 V requires an external power supply supervisor | min 1.7 · max 2.4 V | 77 |
| Analog operating voltage (ADC limited to 2.4 M samples) VDDA | Must be the same potential as VDD | min 2.4 · max 3.6 V | 77 |
| Backup operating voltage VBAT | min 1.65 · max 3.6 V | 77 | |
| USB supply voltage (supply voltage for PA11,PA12, PB14 and PB15 pins) VDDUSB | USB not used | min 1.7 · max 3.6 V | 77 |
| USB supply voltage (supply voltage for PA11,PA12, PB14 and PB15 pins) VDDUSB | USB used | min 3 · max 3.6 V | 77 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 | Power Scale 3, PWR_CR VOS[1:0] = 0x01, 120 MHz HCLK max frequency | min 1.08 · typ 1.14 · max 1.2 V | 77 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 | Power Scale 2, PWR_CR VOS[1:0] = 0x10, 144 MHz HCLK max with over-drive OFF or 168 MHz with over-drive ON | min 1.2 · typ 1.26 · max 1.32 V | 77 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 | Power Scale 1, PWR_CR VOS[1:0] = 0x11, 168 MHz HCLK max with over-drive OFF or 180 MHz with over-drive ON | min 1.26 · typ 1.32 · max 1.4 V | 77 |
| Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12 | Max frequency 120 MHz; requires package featuring BYPASS_REG | min 1.1 · typ 1.14 · max 1.2 V | 77 |
| Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12 | Max frequency 144 MHz; requires package featuring BYPASS_REG | min 1.2 · typ 1.26 · max 1.32 V | 77 |
| Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12 | Max frequency 168 MHz; requires package featuring BYPASS_REG | min 1.26 · typ 1.32 · max 1.38 V | 77 |
| Input voltage on RST, FTf and FT pins VIN | 2 V ≤VDD ≤3.6 V; disable internal pull-up and pull-down to sustain voltage above VDD+0.3 | min -0.3 · max 5.5 V | 77 |
| Input voltage on RST, FTf and FT pins VIN | 1.7 V ≤ VDD ≤ 2 V; disable internal pull-up and pull-down to sustain voltage above VDD+0.3 | min -0.3 · max 5.2 V | 77 |
| Input voltage on TTa pins VIN | min -0.3 V | 77 | |
| Input voltage on BOOT0 pin VIN | min 0 · max 9 V | 77 | |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PD | LQFP64; higher PD allowed at lower TA if TJ does not exceed TJmax | max 345 mW | 77 |
| Ambient temperature for 6 suffix version TA | Maximum power dissipation | min -40 · max 85 °C | 77 |
| Ambient temperature for 6 suffix version TA | Low power dissipation; TJ must not exceed TJmax | min -40 · max 105 °C | 77 |
| Junction temperature range TJ | 6 suffix version | min -40 · max 105 °C | 77 |
| Capacitance of external capacitor CEXT | typ 2.2 uF | 79 | |
| ESR of external capacitor ESR | Strict upper bound | max 2 Ω | 79 |
| Capacitance of external capacitor with a single VCAP pin available CEXT | Single VCAP pin available | typ 4.7 uF | 79 |
| ESR of external capacitor with a single VCAP pin available ESR | Single VCAP pin available; strict upper bound | max 1 Ω | 79 |
| VDD rise time rate tVDD | Subject to general operating conditions for TA | min 20 | 79 |
| VDD fall time rate tVDD | Subject to general operating conditions for TA | min 20 | 79 |
| VDD rise time rate tVDD | Power-up | min 20 us/V | 79 |
| VDD fall time rate tVDD | Power-down | min 20 us/V | 79 |
| VCAP_1 and VCAP_2 rise time rate tVCAP | Power-up | min 20 us/V | 79 |
| VCAP_1 and VCAP_2 fall time rate tVCAP | Power-down | min 20 us/V | 79 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 180 MHz; max at 25 °C | typ 72 · max 83 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 180 MHz; 85 °C | max 100 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 180 MHz; 105 °C | max 110 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 168 MHz; max at 25 °C | typ 65 · max 71 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 168 MHz; 85 °C | max 95.3 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 168 MHz; 105 °C | max 101 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 150 MHz; max at 25 °C | typ 59 · max 63.6 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 150 MHz; 85 °C | max 85.4 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 150 MHz; 105 °C | max 100.8 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 144 MHz; overdrive OFF; max at 25 °C | typ 54 · max 58.4 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 144 MHz; overdrive OFF; 85 °C | max 78.8 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 144 MHz; overdrive OFF; 105 °C | max 91.2 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 120 MHz; max at 25 °C | typ 40 · max 44.9 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 120 MHz; 85 °C | max 62.1 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 120 MHz; 105 °C | max 73.2 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 90 MHz; max at 25 °C | typ 30 · max 35.3 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 90 MHz; 85 °C | max 50.7 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 90 MHz; 105 °C | max 60 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 60 MHz; max at 25 °C | typ 21 · max 25.5 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 60 MHz; 85 °C | max 39.2 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 60 MHz; 105 °C | max 46.8 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 30 MHz; max at 25 °C | typ 12 · max 16.2 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 30 MHz; 85 °C | max 28.1 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 30 MHz; 105 °C | max 36 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 25 MHz; max at 25 °C | typ 10 · max 14.41 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 25 MHz; 85 °C | max 26.17 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 25 MHz; 105 °C | max 32.4 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 16 MHz; max at 25 °C | typ 6 · max 11.4 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 16 MHz; 85 °C | max 23.1 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 16 MHz; 105 °C | max 25.2 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 8 MHz; max at 25 °C | typ 3 · max 9.5 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 8 MHz; 85 °C | max 20.3 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 8 MHz; 105 °C | max 22.5 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 4 MHz; max at 25 °C | typ 2.3 · max 8.3 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 4 MHz; 85 °C | max 18.9 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 4 MHz; 105 °C | max 21.1 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 2 MHz; max at 25 °C | typ 1.8 · max 7.7 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 2 MHz; 85 °C | max 18.1 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 2 MHz; 105 °C | max 20.5 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 180 MHz; max at 25 °C | typ 32 · max 42 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 180 MHz; 85 °C | max 59 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 180 MHz; 105 °C | max 75 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 168 MHz; max at 25 °C | typ 29 · max 35.5 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 168 MHz; 85 °C | max 51.4 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 168 MHz; 105 °C | max 55.7 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 150 MHz; max at 25 °C | typ 26 · max 31.5 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 150 MHz; 85 °C | max 47.8 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 150 MHz; 105 °C | max 51.9 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 144 MHz; overdrive OFF; max at 25 °C | typ 24 · max 29.2 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 144 MHz; overdrive OFF; 85 °C | max 44.7 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 144 MHz; overdrive OFF; 105 °C | max 48.6 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 120 MHz; max at 25 °C | typ 18 · max 23.3 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 120 MHz; 85 °C | max 36.8 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 120 MHz; 105 °C | max 40.4 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 90 MHz; max at 25 °C | typ 14 · max 19 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 90 MHz; 85 °C | max 31.8 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 90 MHz; 105 °C | max 35.1 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 60 MHz; max at 25 °C | typ 10 · max 14.7 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 60 MHz; 85 °C | max 26.9 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 60 MHz; 105 °C | max 29.9 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 30 MHz; max at 25 °C | typ 6 · max 10.7 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 30 MHz; 85 °C | max 22.1 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 30 MHz; 105 °C | max 24.9 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 25 MHz; max at 25 °C | typ 5 · max 9.96 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 25 MHz; 85 °C | max 21.24 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 25 MHz; 105 °C | max 24.02 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 16 MHz; max at 25 °C | typ 3 · max 8.7 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 16 MHz; 85 °C | max 18.9 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 16 MHz; 105 °C | max 21.9 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 8 MHz; max at 25 °C | typ 2 · max 8.1 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 8 MHz; 85 °C | max 17.8 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 8 MHz; 105 °C | max 20.9 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 4 MHz; max at 25 °C | typ 1.7 · max 7.64 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 4 MHz; 85 °C | max 17.23 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 4 MHz; 105 °C | max 20.32 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 2 MHz; max at 25 °C | typ 1.4 · max 7.4 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 2 MHz; 85 °C | max 16.94 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 2 MHz; 105 °C | max 20.03 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 180 MHz; max at 25 °C | typ 86 · max 93 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 180 MHz; 85 °C | max 115 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 180 MHz; 105 °C | max 125 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 168 MHz; overdrive OFF; max at 25 °C | typ 79 · max 85.1 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 168 MHz; overdrive OFF; 85 °C | max 111.2 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 168 MHz; overdrive OFF; 105 °C | max 117.7 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 150 MHz; max at 25 °C | typ 73 · max 79.6 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 150 MHz; 85 °C | max 104.8 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 150 MHz; 105 °C | max 111.2 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 144 MHz; overdrive OFF; max at 25 °C | typ 68 · max 73.5 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 144 MHz; overdrive OFF; 85 °C | max 97.3 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 144 MHz; overdrive OFF; 105 °C | max 103.3 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 120 MHz; max at 25 °C | typ 54 · max 59.3 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 120 MHz; 85 °C | max 79.7 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 120 MHz; 105 °C | max 84.7 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 90 MHz; max at 25 °C | typ 42 · max 47.23 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 90 MHz; 85 °C | max 65.5 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 90 MHz; 105 °C | max 70.1 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 60 MHz; max at 25 °C | typ 29 · max 33.7 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 60 MHz; 85 °C | max 49.5 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 60 MHz; 105 °C | max 53.4 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 30 MHz; max at 25 °C | typ 16 · max 20.8 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 30 MHz; 85 °C | max 34 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 30 MHz; 105 °C | max 37.4 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 25 MHz; max at 25 °C | typ 13 · max 18.4 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 25 MHz; 85 °C | max 31.2 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 25 MHz; 105 °C | max 34.5 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 16 MHz; max at 25 °C | typ 8 · max 13.8 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 16 MHz; 85 °C | max 25 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 16 MHz; 105 °C | max 28.3 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 8 MHz; max at 25 °C | typ 5 · max 10.8 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 8 MHz; 85 °C | max 21.1 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 8 MHz; 105 °C | max 24.2 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 4 MHz; max at 25 °C | typ 3 · max 9.1 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 4 MHz; 85 °C | max 18.9 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 4 MHz; 105 °C | max 22 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 2 MHz; max at 25 °C | typ 2.1 · max 8.1 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 2 MHz; 85 °C | max 17.8 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; 2 MHz; 105 °C | max 20.9 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 180 MHz; max at 25 °C | typ 46 · max 55 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 180 MHz; 85 °C | max 75 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 180 MHz; 105 °C | max 86 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 168 MHz; max at 25 °C | typ 43 · max 49.6 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 168 MHz; 85 °C | max 67.5 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 168 MHz; 105 °C | max 72.6 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 150 MHz; max at 25 °C | typ 41 · max 48.2 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 150 MHz; 85 °C | max 65.8 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 150 MHz; 105 °C | max 70.8 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 144 MHz; overdrive OFF; max at 25 °C | typ 38 · max 43.6 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 144 MHz; overdrive OFF; 85 °C | max 61.9 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 144 MHz; overdrive OFF; 105 °C | max 66.8 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 120 MHz; max at 25 °C | typ 32 · max 37.3 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 120 MHz; 85 °C | max 53.7 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 120 MHz; 105 °C | max 58 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 90 MHz; max at 25 °C | typ 26 · max 30.7 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 90 MHz; 85 °C | max 46 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 90 MHz; 105 °C | max 50 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 60 MHz; max at 25 °C | typ 18 · max 22.8 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 60 MHz; 85 °C | max 36.4 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 60 MHz; 105 °C | max 40.1 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 30 MHz; max at 25 °C | typ 10 · max 14.9 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 30 MHz; 85 °C | max 27.1 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 30 MHz; 105 °C | max 30.2 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 25 MHz; max at 25 °C | typ 9 · max 13.55 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 25 MHz; 85 °C | max 25.4 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 25 MHz; 105 °C | max 28.54 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 16 MHz; max at 25 °C | typ 5 · max 11.1 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 16 MHz; 85 °C | max 21.8 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 16 MHz; 105 °C | max 25 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 8 MHz; max at 25 °C | typ 3 · max 9.5 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 8 MHz; 85 °C | max 19.4 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 8 MHz; 105 °C | max 22.5 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 4 MHz; max at 25 °C | typ 2.4 · max 8.34 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 4 MHz; 85 °C | max 18.1 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 4 MHz; 105 °C | max 21.17 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 2 MHz; max at 25 °C | typ 1.8 · max 7.77 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 2 MHz; 85 °C | max 17.39 mA | 84 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 2 MHz; 105 °C | max 20.5 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 180 MHz; max at 25 °C | typ 81 · max 89 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 180 MHz; 85 °C | max 110 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 180 MHz; 105 °C | max 120 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 168 MHz; overdrive OFF; max at 25 °C | typ 74 · max 80.2 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 168 MHz; overdrive OFF; 85 °C | max 105.7 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 168 MHz; overdrive OFF; 105 °C | max 112 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 150 MHz; max at 25 °C | typ 69 · max 74.9 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 150 MHz; 85 °C | max 99.5 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 150 MHz; 105 °C | max 105.6 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 144 MHz; overdrive OFF; max at 25 °C | typ 63 · max 69.3 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 144 MHz; overdrive OFF; 85 °C | max 92.4 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 144 MHz; overdrive OFF; 105 °C | max 98.1 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 120 MHz; max at 25 °C | typ 51 · max 56.3 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 120 MHz; 85 °C | max 76.1 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 120 MHz; 105 °C | max 81.1 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 90 MHz; max at 25 °C | typ 40 · max 45.32 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 90 MHz; 85 °C | max 63.19 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 90 MHz; 105 °C | max 67.63 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 60 MHz; max at 25 °C | typ 28 · max 33.1 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 60 MHz; 85 °C | max 48.7 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; 60 MHz; 105 °C | max 52.6 mA | 85 |
| Supply current in RUN mode IDD | All peripherals enabled; 16 MHz; max at 25 °C; clock-source grouping unclear in supplied text | typ 8 · max 13.8 mA | 85 |
| Supply current in RUN mode IDD | All peripherals enabled; 16 MHz; 85 °C; clock-source grouping unclear in supplied text | max 25 mA | 85 |
| Supply current in RUN mode IDD | All peripherals enabled; 16 MHz; 105 °C; clock-source grouping unclear in supplied text | max 28.2 mA | 85 |
| Supply current in RUN mode IDD | All peripherals enabled; 8 MHz; max at 25 °C; clock-source grouping unclear in supplied text | typ 5 · max 10.8 mA | 85 |
| Supply current in RUN mode IDD | All peripherals enabled; 8 MHz; 85 °C; clock-source grouping unclear in supplied text | max 21.1 mA | 85 |
| Supply current in RUN mode IDD | All peripherals enabled; 8 MHz; 105 °C; clock-source grouping unclear in supplied text | max 24.2 mA | 85 |
| Supply current in RUN mode IDD | All peripherals enabled; 4 MHz; max at 25 °C; clock-source grouping unclear in supplied text | typ 3 · max 9.1 mA | 85 |
| Supply current in RUN mode IDD | All peripherals enabled; 4 MHz; 85 °C; clock-source grouping unclear in supplied text | max 19 mA | 85 |
| Supply current in RUN mode IDD | All peripherals enabled; 4 MHz; 105 °C; clock-source grouping unclear in supplied text | max 22 mA | 85 |
| Supply current in RUN mode IDD | All peripherals enabled; 2 MHz; max at 25 °C; clock-source grouping unclear in supplied text | typ 2.1 · max 8.1 mA | 85 |
| Supply current in RUN mode IDD | All peripherals enabled; 2 MHz; 85 °C; clock-source grouping unclear in supplied text | max 17.9 mA | 85 |
| Supply current in RUN mode IDD | All peripherals enabled; 2 MHz; 105 °C; clock-source grouping unclear in supplied text | max 20.9 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 180 MHz; max at 25 °C | typ 41 · max 47 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 180 MHz; 85 °C | max 69 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 180 MHz; 105 °C | max 79 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 168 MHz; max at 25 °C | typ 38 · max 43.2 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 168 MHz; 85 °C | max 61.9 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 168 MHz; 105 °C | max 67.1 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 150 MHz; max at 25 °C | typ 37 · max 41.8 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 150 MHz; 85 °C | max 60.3 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 150 MHz; 105 °C | max 65.4 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 144 MHz; overdrive OFF; max at 25 °C | typ 34 · max 39.3 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 144 MHz; overdrive OFF; 85 °C | max 56.9 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all Peripherals disabled; 144 MHz; overdrive OFF; 105 °C | max 61.6 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 120 MHz; max at 25 °C; clock-source grouping unclear in supplied text | typ 29 · max 34.3 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 120 MHz; 85 °C; clock-source grouping unclear in supplied text | max 50.2 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 120 MHz; 105 °C; clock-source grouping unclear in supplied text | max 54.4 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 90 MHz; max at 25 °C; clock-source grouping unclear in supplied text | typ 24 · max 28.8 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 90 MHz; 85 °C; clock-source grouping unclear in supplied text | max 43.6 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 90 MHz; 105 °C; clock-source grouping unclear in supplied text | max 47.5 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 60 MHz; max at 25 °C; clock-source grouping unclear in supplied text | typ 17 · max 22 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 60 MHz; 85 °C; clock-source grouping unclear in supplied text | max 35.6 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 60 MHz; 105 °C; clock-source grouping unclear in supplied text | max 39.2 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 30 MHz; max at 25 °C; clock-source grouping unclear in supplied text | typ 10 · max 14.8 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 30 MHz; 85 °C; clock-source grouping unclear in supplied text | max 27 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 30 MHz; 105 °C; clock-source grouping unclear in supplied text | max 30.1 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 25 MHz; max at 25 °C; clock-source grouping unclear in supplied text | typ 8 · max 13.51 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 25 MHz; 85 °C; clock-source grouping unclear in supplied text | max 25.36 mA | 85 |
| Supply current in RUN mode IDD | All peripherals disabled; 25 MHz; 105 °C; clock-source grouping unclear in supplied text | max 28.47 mA | 85 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 16 MHz; max at 25 °C | typ 5 · max 11.1 mA | 85 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 16 MHz; 85 °C | max 21.8 mA | 85 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals disabled; 16 MHz; 105 °C | max 24.9 mA | 85 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all Peripherals disabled; 8 MHz; max at 25 °C | typ 3 · max 9.5 mA | 85 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all Peripherals disabled; 8 MHz; 85 °C | max 19.4 mA | 85 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all Peripherals disabled; 8 MHz; 105 °C | max 22.5 mA | 85 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all Peripherals disabled; 4 MHz; max at 25 °C | typ 2.3 · max 8.35 mA | 85 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all Peripherals disabled; 4 MHz; 85 °C | max 18.12 mA | 85 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all Peripherals disabled; 4 MHz; 105 °C | max 21.17 mA | 85 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all Peripherals disabled; 2 MHz; max at 25 °C | typ 1.8 · max 7.78 mA | 85 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all Peripherals disabled; 2 MHz; 85 °C | max 17.42 mA | 85 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all Peripherals disabled; 2 MHz; 105 °C | max 20.51 mA | 85 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, and LSE oscillator in low power mode; 25 °C; VDD = 1.7 V | typ 2.43 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, and LSE oscillator in low power mode; 25 °C; VDD = 2.4 V | typ 3.44 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, and LSE oscillator in low power mode; 25 °C; VDD = 3.3 V | typ 4.12 · max 7 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, and LSE oscillator in low power mode; 85 °C; VDD = 3.3 V | max 20 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, and LSE oscillator in low power mode; 105 °C; VDD = 3.3 V | max 36 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; 25 °C; VDD = 1.7 V | typ 1.81 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; 25 °C; VDD = 2.4 V | typ 2.81 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; 25 °C; VDD = 3.3 V | typ 3.33 · max 6 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; 85 °C; VDD = 3.3 V | max 17 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; 105 °C; VDD = 3.3 V | max 31 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE oscillator in high drive mode; 25 °C; VDD = 1.7 V | typ 3.32 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE oscillator in high drive mode; 25 °C; VDD = 2.4 V | typ 4.33 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE oscillator in high drive mode; 25 °C; VDD = 3.3 V | typ 4.95 · max 8 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE oscillator in high drive mode; 85 °C; VDD = 3.3 V | max 21 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE oscillator in high drive mode; 105 °C; VDD = 3.3 V | max 37 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in high drive mode; 25 °C; VDD = 1.7 V | typ 2.57 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in high drive mode; 25 °C; VDD = 2.4 V | typ 3.59 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in high drive mode; 25 °C; VDD = 3.3 V | typ 4.16 · max 7 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in high drive mode; 85 °C; VDD = 3.3 V | max 18 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in high drive mode; 105 °C; VDD = 3.3 V | max 32 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; 25 °C; VDD = 1.7 V | typ 2.03 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; 25 °C; VDD = 2.4 V | typ 2.73 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; 25 °C; VDD = 3.3 V | typ 3.5 · max 6 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; 85 °C; VDD = 3.3 V | max 19 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; 105 °C; VDD = 3.3 V | max 35 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; 25 °C; VDD = 1.7 V | typ 1.28 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; 25 °C; VDD = 2.4 V | typ 1.97 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; 25 °C; VDD = 3.3 V | typ 2.03 · max 5 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; 85 °C; VDD = 3.3 V | max 16 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; 105 °C; VDD = 3.3 V | max 30 uA | 90 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = + 25 °C conforming to ANSI/JEDEC JS-001; class 2 | max 2000 V | 116 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = + 25 °C conforming to ANSI/ESD STM5.3.1; LQFP64; class C4 | max 500 V | 116 |
| Thermal resistance junction-ambient ΘJA | LQFP64 - 10 × 10 mm | typ 46 °C/W | 195 |
| InRush current on voltage regulator power-on (POR or wakeup from Standby) IRUSH | typ 160 · max 200 mA | 81 | |
| InRush energy on voltage regulator power-on (POR or wakeup from Standby) ERUSH | VDD = 1.7 V, TA = 105 °C, IRUSH = 171 mA for 31 us | max 5.4 uC | 81 |
| Over_drive switch enable time Tod_swen | HSI | typ 45 us | 81 |
| Over_drive switch enable time Tod_swen | HSE max for 4 MHz and min for 26 MHz | min 45 · max 100 us | 81 |
| Over_drive switch enable time Tod_swen | External HSE 50 MHz | typ 40 us | 81 |
| Over_drive switch disable time Tod_swdis | HSI | typ 20 us | 81 |
| Over_drive switch disable time Tod_swdis | HSE max for 4 MHz and min for 26 MHz | min 20 · max 80 us | 81 |
| Over_drive switch disable time Tod_swdis | External HSE 50 MHz | typ 15 us | 81 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 25 °C | typ 72 · max 83 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 85 °C | max 100 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 105 °C | max 110 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 168 MHz; TA = 25 °C | typ 65 · max 71 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 168 MHz; TA = 85 °C | max 95.3 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 168 MHz; TA = 105 °C | max 101 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 150 MHz; TA = 25 °C | typ 59 · max 63.6 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 150 MHz; TA = 85 °C | max 85.4 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 150 MHz; TA = 105 °C | max 100.8 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 144 MHz, overdrive OFF; TA = 25 °C | typ 54 · max 58.4 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 144 MHz, overdrive OFF; TA = 85 °C | max 78.8 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 144 MHz, overdrive OFF; TA = 105 °C | max 91.2 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 120 MHz; TA = 25 °C | typ 40 · max 44.9 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 120 MHz; TA = 85 °C | max 62.1 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 120 MHz; TA = 105 °C | max 73.2 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 90 MHz; TA = 25 °C | typ 30 · max 35.3 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 90 MHz; TA = 85 °C | max 50.7 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 90 MHz; TA = 105 °C | max 60 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 60 MHz; TA = 25 °C | typ 21 · max 25.5 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 60 MHz; TA = 85 °C | max 39.2 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 60 MHz; TA = 105 °C | max 46.8 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 30 MHz; TA = 25 °C | typ 12 · max 16.2 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 30 MHz; TA = 85 °C | max 28.1 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 30 MHz; TA = 105 °C | max 36 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 25 MHz; TA = 25 °C | typ 10 · max 14.41 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 25 MHz; TA = 85 °C | max 26.17 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 25 MHz; TA = 105 °C | max 32.4 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; fHCLK = 16 MHz; TA = 25 °C | typ 6 · max 11.4 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; fHCLK = 16 MHz; TA = 85 °C | max 23.1 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; fHCLK = 16 MHz; TA = 105 °C | max 25.2 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; fHCLK = 8 MHz; TA = 25 °C | typ 3 · max 9.5 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; fHCLK = 8 MHz; TA = 85 °C | max 20.3 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; fHCLK = 8 MHz; TA = 105 °C | max 22.5 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; fHCLK = 4 MHz; TA = 25 °C | typ 2.3 · max 8.3 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; fHCLK = 4 MHz; TA = 85 °C | max 18.9 mA | 83 |
| Supply current in RUN mode IDD | HSI, PLL OFF, all peripherals enabled; fHCLK = 4 MHz; TA = 105 °C | max 21.1 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals disabled; fHCLK = 180 MHz; TA = 25 °C | typ 32 · max 42 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals disabled; fHCLK = 180 MHz; TA = 85 °C | max 59 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals disabled; fHCLK = 180 MHz; TA = 105 °C | max 75 mA | 83 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 25 °C | typ 86 · max 93 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 85 °C | max 115 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 105 °C | max 125 mA | 84 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 25 °C | typ 81 · max 89 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 85 °C | max 110 mA | 85 |
| Supply current in RUN mode IDD | External clock, PLL ON, all peripherals enabled; fHCLK = 180 MHz; TA = 105 °C | max 120 mA | 85 |
| Supply current in Stop mode with voltage regulator in main regulator mode IDD_STOP_NM | Flash memory in Stop mode, all oscillators OFF, no independent watchdog; TA = 25 °C; maximum at VDD = 3.6 V | typ 0.234 · max 1.2 mA | 89 |
| Supply current in Stop mode with voltage regulator in main regulator mode IDD_STOP_NM | Flash memory in Stop mode, all oscillators OFF, no independent watchdog; TA = 85 °C, VDD = 3.6 V | max 10 mA | 89 |
| Supply current in Stop mode with voltage regulator in main regulator mode IDD_STOP_NM | Flash memory in Stop mode, all oscillators OFF, no independent watchdog; TA = 105 °C, VDD = 3.6 V | max 16 mA | 89 |
| Supply current in Stop mode with voltage regulator in main regulator mode IDD_STOP_NM | Flash memory in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 25 °C; maximum at VDD = 3.6 V | typ 0.205 · max 1 mA | 89 |
| Supply current in Stop mode with voltage regulator in main regulator mode IDD_STOP_NM | Flash memory in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 85 °C, VDD = 3.6 V | max 9.5 mA | 89 |
| Supply current in Stop mode with voltage regulator in main regulator mode IDD_STOP_NM | Flash memory in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 105 °C, VDD = 3.6 V | max 15 mA | 89 |
| Supply current in Stop mode with voltage regulator in Low Power regulator mode IDD_STOP_NM | Flash memory in Stop mode, all oscillators OFF, no independent watchdog; TA = 25 °C; maximum at VDD = 3.6 V | typ 0.15 · max 0.95 mA | 89 |
| Supply current in Stop mode with voltage regulator in Low Power regulator mode IDD_STOP_NM | Flash memory in Stop mode, all oscillators OFF, no independent watchdog; TA = 85 °C, VDD = 3.6 V | max 8.5 mA | 89 |
| Supply current in Stop mode with voltage regulator in Low Power regulator mode IDD_STOP_NM | Flash memory in Stop mode, all oscillators OFF, no independent watchdog; TA = 105 °C, VDD = 3.6 V | max 14 mA | 89 |
| Supply current in Stop mode with voltage regulator in Low Power regulator mode IDD_STOP_NM | Flash memory in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 25 °C; maximum at VDD = 3.6 V | typ 0.121 · max 0.9 mA | 89 |
| Supply current in Stop mode with voltage regulator in Low Power regulator mode IDD_STOP_NM | Flash memory in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 85 °C, VDD = 3.6 V | max 6 mA | 89 |
| Supply current in Stop mode with voltage regulator in Low Power regulator mode IDD_STOP_NM | Flash memory in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 105 °C, VDD = 3.6 V | max 12 mA | 89 |
| Supply current in Stop mode with voltage regulator in main regulator and under-drive mode IDD_STOP_UDM | Flash memory in Deep power down mode, main regulator in under-drive mode, all oscillators OFF, no independent watchdog; TA = 25 °C; maximum at VDD = 3.6 V | typ 0.119 · max 0.4 mA | 89 |
| Supply current in Stop mode with voltage regulator in main regulator and under-drive mode IDD_STOP_UDM | Flash memory in Deep power down mode, main regulator in under-drive mode, all oscillators OFF, no independent watchdog; TA = 85 °C, VDD = 3.6 V | max 3 mA | 89 |
| Supply current in Stop mode with voltage regulator in main regulator and under-drive mode IDD_STOP_UDM | Flash memory in Deep power down mode, main regulator in under-drive mode, all oscillators OFF, no independent watchdog; TA = 105 °C, VDD = 3.6 V | max 5 mA | 89 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, and LSE oscillator in low power mode; TA = 25 °C, VDD = 1.7 V | typ 2.43 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, and LSE oscillator in low power mode; TA = 25 °C, VDD = 2.4 V | typ 3.44 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, and LSE oscillator in low power mode; TA = 25 °C, VDD = 3.3 V | typ 4.12 · max 7 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, and LSE oscillator in low power mode; TA = 85 °C, VDD = 3.3 V | max 20 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, and LSE oscillator in low power mode; TA = 105 °C, VDD = 3.3 V | max 36 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VDD = 1.7 V | typ 1.81 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VDD = 2.4 V | typ 2.81 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VDD = 3.3 V | typ 3.33 · max 6 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 85 °C, VDD = 3.3 V | max 17 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 105 °C, VDD = 3.3 V | max 31 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VDD = 1.7 V | typ 3.32 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VDD = 2.4 V | typ 4.33 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VDD = 3.3 V | typ 4.95 · max 8 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 85 °C, VDD = 3.3 V | max 21 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 105 °C, VDD = 3.3 V | max 37 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VDD = 1.7 V | typ 2.57 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VDD = 2.4 V | typ 3.59 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VDD = 3.3 V | typ 4.16 · max 7 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 85 °C, VDD = 3.3 V | max 18 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 105 °C, VDD = 3.3 V | max 32 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; TA = 25 °C, VDD = 1.7 V | typ 2.03 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; TA = 25 °C, VDD = 2.4 V | typ 2.73 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; TA = 25 °C, VDD = 3.3 V | typ 3.5 · max 6 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; TA = 85 °C, VDD = 3.3 V | max 19 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM ON, RTC and LSE OFF; TA = 105 °C, VDD = 3.3 V | max 35 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; TA = 25 °C, VDD = 1.7 V | typ 1.28 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; TA = 25 °C, VDD = 2.4 V | typ 1.97 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; TA = 25 °C, VDD = 3.3 V | typ 2.03 · max 5 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; TA = 85 °C, VDD = 3.3 V | max 16 uA | 90 |
| Supply current in Standby mode IDD_STBY | Backup SRAM OFF, RTC and LSE OFF; TA = 105 °C, VDD = 3.3 V | max 30 uA | 90 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VBAT = 1.7 V | typ 1.46 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VBAT = 2.4 V | typ 1.62 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VBAT = 3.3 V | typ 1.83 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC ON and LSE oscillator in low power mode; TA = 85 °C, VBAT = 3.6 V | max 6 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC ON and LSE oscillator in low power mode; TA = 105 °C, VBAT = 3.6 V | max 11 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VBAT = 1.7 V | typ 0.72 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VBAT = 2.4 V | typ 0.85 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 25 °C, VBAT = 3.3 V | typ 1 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 85 °C, VBAT = 3.6 V | max 3 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC ON and LSE oscillator in low power mode; TA = 105 °C, VBAT = 3.6 V | max 5 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VBAT = 1.7 V | typ 2.24 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VBAT = 2.4 V | typ 2.4 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VBAT = 3.3 V | typ 2.64 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VBAT = 1.7 V | typ 1.5 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VBAT = 2.4 V | typ 1.64 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC ON and LSE oscillator in high drive mode; TA = 25 °C, VBAT = 3.3 V | typ 1.86 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC and LSE OFF; TA = 25 °C, VBAT = 1.7 V | typ 0.74 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC and LSE OFF; TA = 25 °C, VBAT = 2.4 V | typ 0.75 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC and LSE OFF; TA = 25 °C, VBAT = 3.3 V | typ 0.78 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC and LSE OFF; TA = 85 °C, VBAT = 3.6 V | max 5 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM ON, RTC and LSE OFF; TA = 105 °C, VBAT = 3.6 V | max 10 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC and LSE OFF; TA = 25 °C, VBAT = 1.7 V | typ 0.05 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC and LSE OFF; TA = 25 °C, VBAT = 2.4 V | typ 0.05 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC and LSE OFF; TA = 25 °C, VBAT = 3.3 V | typ 0.05 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC and LSE OFF; TA = 85 °C, VBAT = 3.6 V | max 2 uA | 91 |
| Backup domain supply current IDD_VBAT | Backup SRAM OFF, RTC and LSE OFF; TA = 105 °C, VBAT = 3.6 V | max 4 uA | 91 |
| I/O switching Current IDDIO | VDD = 3.3 V, C = CINT; fsw = 2 MHz | typ 0 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, C = CINT; fsw = 8 MHz | typ 0.2 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, C = CINT; fsw = 25 MHz | typ 0.6 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, C = CINT; fsw = 50 MHz | typ 1.1 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, C = CINT; fsw = 60 MHz | typ 1.3 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, C = CINT; fsw = 84 MHz | typ 1.8 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, C = CINT; fsw = 90 MHz | typ 1.9 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 2 MHz | typ 0.1 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 8 MHz | typ 0.4 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 25 MHz | typ 1.23 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 50 MHz | typ 2.43 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 60 MHz | typ 2.93 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 84 MHz | typ 3.86 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 0 pF, C = CINT + CEXT + CS; fsw = 90 MHz | typ 4.07 mA | 97 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 2 MHz | typ 0.18 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 8 MHz | typ 0.67 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 25 MHz | typ 2.09 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 50 MHz | typ 3.6 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 60 MHz | typ 4.5 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 84 MHz | typ 7.8 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 10 pF, C = CINT + CEXT + CS; fsw = 90 MHz | typ 9.8 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 22 pF, C = CINT + CEXT + CS; fsw = 2 MHz | typ 0.26 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 22 pF, C = CINT + CEXT + CS; fsw = 8 MHz | typ 1.01 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 22 pF, C = CINT + CEXT + CS; fsw = 25 MHz | typ 3.14 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 22 pF, C = CINT + CEXT + CS; fsw = 50 MHz | typ 6.39 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 22 pF, C = CINT + CEXT + CS; fsw = 60 MHz | typ 10.68 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 33 pF, C = CINT + Cext + CS; fsw = 2 MHz | typ 0.33 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 33 pF, C = CINT + Cext + CS; fsw = 8 MHz | typ 1.29 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 33 pF, C = CINT + Cext + CS; fsw = 25 MHz | typ 4.23 mA | 98 |
| I/O switching Current IDDIO | VDD = 3.3 V, CEXT = 33 pF, C = CINT + Cext + CS; fsw = 50 MHz | typ 11.02 mA | 98 |
| Oscillator frequency fOSC_IN | min 4 · max 26 MHz | 105 | |
| Feedback resistor RF | typ 200 kΩ | 105 | |
| HSE current consumption IDD | VDD=3.3 V, ESR= 30 Ω, CL=5 pF@25 MHz | typ 450 uA | 105 |
| HSE current consumption IDD | VDD=3.3 V, ESR= 30 Ω, CL=10 pF@25 MHz | typ 530 uA | 105 |
| HSE accuracy ACCHSE | min -500 · max 500 ppm | 105 | |
| Maximum critical crystal gm Gm_crit_max | Startup | max 1 mA/V | 105 |
| Startup time tSU(HSE) | VDD is stabilized | typ 2 ms | 105 |
| Feedback resistor RF | typ 18.4 MΩ | 106 | |
| LSE current consumption IDD | max 1 uA | 106 | |
| LSE accuracy ACCLSE | min -500 · max 500 ppm | 106 | |
| Maximum critical crystal gm Gm_crit_max | Startup low-power mode | max 0.56 uA/V | 106 |
| Maximum critical crystal gm Gm_crit_max | Startup high-drive mode | max 1.5 uA/V | 106 |
| startup time tSU(LSE) | VDD is stabilized | typ 2 s | 106 |
| PLL lock time tLOCK | VCO freq = 100 MHz | min 75 · max 200 us | 109 |
| PLL lock time tLOCK | VCO freq = 432 MHz | min 100 · max 300 us | 109 |
| Cycle-to-cycle jitter Jitter | System clock 120 MHz, RMS | typ 25 ps | 109 |
| Period Jitter Jitter | System clock 120 MHz, RMS | typ 15 ps | 109 |
| Bit Time CAN jitter Jitter | Cycle to cycle at 1 MHz on 1000 samples | typ 330 ps | 109 |
| PLL power consumption on VDD IDD(PLL) | VCO freq = 100 MHz | min 0.15 · max 0.4 mA | 109 |
| PLL power consumption on VDD IDD(PLL) | VCO freq = 432 MHz | min 0.45 · max 0.75 mA | 109 |
| PLL power consumption on VDDA IDDA(PLL) | VCO freq = 100 MHz | min 0.3 · max 0.4 mA | 109 |
| PLL power consumption on VDDA IDDA(PLL) | VCO freq = 432 MHz | min 0.55 · max 0.85 mA | 109 |
| PLLI2S input clock fPLLI2S_IN | min 0.95 · typ 1 · max 2.1 MHz | 109 | |
| PLLI2S multiplier output clock fPLLI2S_OUT | max 216 MHz | 109 | |
| PLLI2S VCO output fVCO_OUT | min 100 · max 432 MHz | 109 | |
| PLLI2S lock time tLOCK | VCO freq = 100 MHz | min 75 · max 200 us | 109 |
| PLLI2S lock time tLOCK | VCO freq = 432 MHz | min 100 · max 300 us | 109 |
| Master I2S clock jitter Jitter | Cycle to cycle at 12.288 MHz on 48KHz period, N=432, R=5, RMS | typ 90 - | 109 |
| Master I2S clock jitter Jitter | Average frequency of 12.288 MHz, N = 432, R = 5, on 1000 samples | typ 90 ps | 109 |
| WS I2S clock jitter Jitter | Cycle to cycle at 48 KHz on 1000 samples | typ 400 ps | 109 |
| PLLI2S power consumption on VDD IDD(PLLI2S) | VCO freq = 100 MHz | min 0.15 · max 0.4 mA | 110 |
| PLLI2S power consumption on VDD IDD(PLLI2S) | VCO freq = 432 MHz | min 0.45 · max 0.75 mA | 110 |
| PLLI2S power consumption on VDDA IDDA(PLLI2S) | VCO freq = 100 MHz | min 0.3 · max 0.4 mA | 110 |
| PLLI2S power consumption on VDDA IDDA(PLLI2S) | VCO freq = 432 MHz | min 0.55 · max 0.85 mA | 110 |
| PLLSAI input clock fPLLSAI_IN | min 0.95 · typ 1 · max 2.1 MHz | 110 | |
| PLLSAI multiplier output clock fPLLSAI_OUT | max 216 MHz | 110 | |
| PLLSAI VCO output fVCO_OUT | min 100 · max 432 MHz | 110 | |
| PLLSAI lock time tLOCK | VCO freq = 100 MHz | min 75 · max 200 us | 110 |
| PLLSAI lock time tLOCK | VCO freq = 432 MHz | min 100 · max 300 us | 110 |
| Main SAI clock jitter Jitter | Cycle to cycle at 12.288 MHz on 48KHz period, N=432, R=5, RMS | typ 90 - | 110 |
| Main SAI clock jitter Jitter | Average frequency of 12.288 MHz, N = 432, R = 5, on 1000 samples | typ 90 ps | 110 |
| FS clock jitter Jitter | Cycle to cycle at 48 KHz on 1000 samples | typ 400 ps | 110 |
| PLLSAI power consumption on VDD IDD(PLLSAI) | VCO freq = 100 MHz | min 0.15 · max 0.4 mA | 110 |
| PLLSAI power consumption on VDD IDD(PLLSAI) | VCO freq = 432 MHz | min 0.45 · max 0.75 mA | 110 |
| PLLSAI power consumption on VDDA IDDA(PLLSAI) | VCO freq = 100 MHz | min 0.3 · max 0.4 mA | 110 |
| PLLSAI power consumption on VDDA IDDA(PLLSAI) | VCO freq = 432 MHz | min 0.55 · max 0.85 mA | 110 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = + 25 °C conforming to ANSI/JEDEC JS-001; Class 2 | max 2000 V | 116 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = + 25 °C conforming to ANSI/ESD STM5.3.1; LQFP64; Class C4 | max 500 V | 116 |
| Output low level voltage for an I/O pin VOL | CMOS port; IIO = +8 mA; 2.7 V ≤VDD ≤3.6 V | max 0.4 V | 121 |
| Output low level voltage for an I/O pin VOL | TTL port; IIO =+ 8mA; 2.7 V ≤VDD ≤3.6 V | max 0.4 V | 121 |
| Output high level voltage for an I/O pin VOH | TTL port; IIO =+ 8mA; 2.7 V ≤VDD ≤3.6 V | min 2.4 V | 121 |
| Output low level voltage for an I/O pin VOL | IIO = +20 mA; 2.7 V ≤VDD ≤3.6 V | max 1.3 V | 121 |
| Output low level voltage for an I/O pin VOL | IIO = +6 mA; 1.8 V ≤VDD ≤3.6 V | max 0.4 V | 121 |
| Output low level voltage for an I/O pin VOL | IIO = +4 mA; 1.7 V ≤VDD ≤3.6V | max 0.4 V | 121 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00; CL = 50 pF, VDD ≥ 2.7 V | max 4 MHz | 121 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00; CL = 50 pF, VDD ≥ 1.7 V | max 2 MHz | 121 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00; CL = 10 pF, VDD ≥ 2.7 V | max 8 MHz | 121 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00; CL = 10 pF, VDD ≥ 1.8 V | max 4 MHz | 121 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00; CL = 10 pF, VDD ≥ 1.7 V | max 3 MHz | 121 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 00; CL = 50 pF, VDD = 1.7 V to 3.6 V | max 100 ns | 121 |
| USB OTG full speed transceiver operating voltage VDDUSB | min 3 · max 3.6 V | 138 | |
| Differential input sensitivity VDI | I(USB_FS_DP/DM, USB_HS_DP/DM) | min 0.2 V | 138 |
| Differential common mode range VCM | Includes VDI range | min 0.8 · max 2.5 V | 138 |
| Single ended receiver threshold VSE | min 1.3 · max 2 V | 138 | |
| Static output level low VOL | RL of 1.5 kΩ to 3.6 V | max 0.3 V | 138 |
| Static output level high VOH | RL of 15 kΩ to VSS | min 2.8 · max 3.6 V | 138 |
| PA11, PA12, PB14, PB15 (USB_FS_DP/DM, USB_HS_DP/DM) RPD | VIN = VDDUSB | min 17 · typ 21 · max 24 kΩ | 138 |
| PA9, PB13 (OTG_FS_VBUS, OTG_HS_VBUS) RPD | VIN = VDDUSB | min 0.65 · typ 1.1 · max 2 kΩ | 138 |
| PA12, PB15 (USB_FS_DP, USB_HS_DP) RPU | VIN = VSS | min 1.5 · typ 1.8 · max 2.1 kΩ | 138 |
| PA9, PB13 (OTG_FS_VBUS, OTG_HS_VBUS) RPU | VIN = VSS | min 0.25 · typ 0.37 · max 0.55 kΩ | 138 |
| Rise time tr | CL = 50 pF | min 4 · max 20 ns | 139 |
| Fall time tf | CL = 50 pF | min 4 · max 20 ns | 139 |
| Rise/ fall time matching trfm | tr/tf | min 90 · max 110 % | 139 |
| Output signal crossover voltage VCRS | min 1.3 · max 2 V | 139 | |
| Output driver impedance ZDRV | Driving high or low | min 28 · max 44 Ω | 139 |
| USB OTG HS operating voltage VDD | Input level | min 1.7 · max 3.6 V | 139 |
| fHCLK value to guarantee proper operation of USB HS interface | min 30 MHz | 139 | |
| Frequency (first transition) FSTART_8BIT | 8-bit ±10% | min 54 · typ 60 · max 66 MHz | 139 |
| Frequency (steady state) ±500 ppm FSTEADY | min 59.97 · typ 60 · max 60.03 MHz | 139 | |
| Duty cycle (first transition) DSTART_8BIT | 8-bit ±10% | min 40 · typ 50 · max 60 % | 139 |
| Duty cycle (steady state) ±500 ppm DSTEADY | min 49.975 · typ 50 · max 50.025 % | 139 | |
| Time to reach the steady state frequency and duty cycle after the first transition tSTEADY | max 1.4 ms | 139 | |
| Resistor bridge for VBAT R | typ 50 KΩ | 148 | |
| Ratio on VBAT measurement Q | typ 4 - | 148 | |
| Error on Q Er | min -1 · max 1 % | 148 | |
| ADC sampling time when reading the VBAT 1 mV accuracy TS_vbat | min 5 us | 148 | |
| Internal reference voltage VREFINT | –40 °C < TA < +105 °C | min 1.18 · typ 1.21 · max 1.24 V | 148 |
| ADC sampling time when reading the internal reference voltage TS_vrefint | min 10 us | 148 | |
| Internal reference voltage spread over the temperature range VRERINT_s | VDD = 3V ± 10mV | typ 3 · max 5 mV | 148 |
| Temperature coefficient TCoeff | typ 30 · max 50 ppm/°C | 148 | |
| Startup time tSTART | typ 6 · max 10 us | 148 | |
| Analog supply voltage VDDA | min 1.7 · max 3.6 V | 148 | |
| Reference supply voltage VREF+ | VREF+ ≤VDDA | min 1.7 · max 3.6 V | 148 |
Parameters
19- ADC (Bit)
- 12bit
- CPU Core
- ARM Cortex-M4
- CPU Maximum Speed
- 180MHz
- Core Size
- 32 Bit
- Current - Supply
- 72mA
- Current - Supply(Max)
- 125mA
- DAC (Bit)
- 12bit
- Junction Temperature(Max)
- 105℃
- Number of I/O
- 50
- Operating Temperature
- -40℃~+105℃
- Oscillator Type
- Built-in
- Output Current per Pin(Max)
- 25mA
- Program Memory Type
- FLASH
- Program Storage Size
- 512KB
- RAM Size
- 128KB
- Standby Current
- 2.03uA
- Thermal Resistance(Junction to Ambient)
- 46℃/W
- Voltage - Supply
- 1.65V~3.6V
- Voltage - Supply(Absolute Max)
- 4V
Order codes
1- STM32F446RET6LCSC C69336
Pinout
64| Pin | Name | Type |
|---|---|---|
| 1 | VBAT | Power in |
| 2 | PC13 | Input/output |
| 3 | PC14 | Input/output |
| 4 | PC15 | Input/output |
| 5 | PH0 | Input/output |
| 6 | PH1 | Input/output |
| 7 | NRST | Input |
| 8 | PC0 | Input/output |
| 9 | PC1 | Input/output |
| 10 | PC2 | Input/output |
| 11 | PC3 | Input/output |
| 12 | VSSA | Power in |
| 13 | VDDA | Power in |
| 14 | PA0 | Input/output |
| 15 | PA1 | Input/output |
| 16 | PA2 | Input/output |
| 17 | PA3 | Input/output |
| 18 | VSS | Power in |
| 19 | VDD | Power in |
| 20 | PA4 | Input/output |
| 21 | PA5 | Input/output |
| 22 | PA6 | Input/output |
| 23 | PA7 | Input/output |
| 24 | PC4 | Input/output |
| 25 | PC5 | Input/output |
| 26 | PB0 | Input/output |
| 27 | PB1 | Input/output |
| 28 | PB2 | Input/output |
| 29 | PB10 | Input/output |
| 30 | VCAP_1 | Power out |
| 31 | VSS | Passive |
| 32 | VDD | Power in |
| 33 | PB12 | Input/output |
| 34 | PB13 | Input/output |
| 35 | PB14 | Input/output |
| 36 | PB15 | Input/output |
| 37 | PC6 | Input/output |
| 38 | PC7 | Input/output |
| 39 | PC8 | Input/output |
| 40 | PC9 | Input/output |
| 41 | PA8 | Input/output |
| 42 | PA9 | Input/output |
| 43 | PA10 | Input/output |
| 44 | PA11 | Input/output |
| 45 | PA12 | Input/output |
| 46 | PA13 | Input/output |
| 47 | VSS | Passive |
| 48 | VDD | Power in |
| 49 | PA14 | Input/output |
| 50 | PA15 | Input/output |
| 51 | PC10 | Input/output |
| 52 | PC11 | Input/output |
| 53 | PC12 | Input/output |
| 54 | PD2 | Input/output |
| 55 | PB3 | Input/output |
| 56 | PB4 | Input/output |
| 57 | PB5 | Input/output |
| 58 | PB6 | Input/output |
| 59 | PB7 | Input/output |
| 60 | BOOT0 | Input |
| 61 | PB8 | Input/output |
| 62 | PB9 | Input/output |
| 63 | VSS | Passive |
| 64 | VDD | Power in |
Open-source boards using it
All 44- 4 layers80 × 107 mm
- 4 layers25.4 × 25.4 mm
- 2 layers75.9 × 50.1 mm
Suspension telemetry
porast1/suspension-telemetry
Suspension telemetry system for mountain bike or dirt bike
77 parts14MIT - 4 layers30.2 × 20.5 mm
BLDCM MCU
brenocq/bldc-motor
High-precision BLDC motor and controller development from scratch (in progress...)
91 parts13MIT - 4 layers28.1 × 76.1 mm
Circuit board design v2.1
ImperialSpaceSociety/Flight-Computer
HPR project by undergraduate students from Imperial College Space Society.
64 parts11 - 2 layers81.4 × 54.9 mm
Eeg
unaldevelopment/8-Channel-Wireless-EEG
Bu sürümde (V2.0) tespit edilen kritik şema ve PCB tasarım hataları düzeltilmiştir: 1. STM32F446RE Besleme Kısa Devresi Giderildi: Pin 12 (VSSA) ve Pin 63 (VSS) pinlerinin +3.3V'a olan bağlantısı kesilerek GND…
225 parts3MIT - 2 layers100 × 71 mm
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/st/STM32F446RET6" title="STM32F446RET6 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/st/STM32F446RET6.jpg" alt="STM32F446RET6" width="1200" height="900">[](https://pcbkit.io/parts/st/STM32F446RET6)Questions
Is there a KiCad symbol and footprint for the STM32F446RET6?
Yes. The symbol is MCU_ST_STM32F4:STM32F446RETx and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32F446RET6?
LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.
Where is the STM32F446RET6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32F446RET6?
JLCPCB lists it as part C69336, with 389 in stock; the sellers' links on this page open their listings.
What can replace the STM32F446RET6?
Parts like it in the library: the AT32F403ARCT7 by ARTERY, the AT32F403ARGT7 by ARTERY, the HC32F460KCTA-LQFP64 by XHSC and the HC32F460KETA-LQFP64 by XHSC. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32F446RET6?
44 boards in 31 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8
AT32F403ARCT7
LQFP-64(10x10)-40℃~+105℃ 2.6V~3.6V 224Byte 240MHz 256KB 32 Bit 51 ARM Cortex-M4F Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSARTERYMicrocontrollers (MCU/MPU/SOC)AT32F403ARGT7
LQFP-64(10x10)-40℃~+105℃ 1MB 2.6V~3.6V 224Byte 240MHz 32 Bit 51 ARM Cortex-M4F Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSARTERYMicrocontrollers (MCU/MPU/SOC)HC32F460KCTA-LQFP64
LQFP-64(10x10)1.8V~3.6V 12bit 200MHz 256KB 52 ARM Cortex-M4 FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSXHSCMicrocontrollers (MCU/MPU/SOC)HC32F460KETA-LQFP64
LQFP-64(10x10)1.8V~3.6V 12bit 200MHz 512KB 52 ARM Cortex-M4 FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSXHSCMicrocontrollers (MCU/MPU/SOC)STM32H562RGT6
LQFP-64(10x10)-40℃~+85℃ 1.71V~3.6V 1MB 250MHz 32 Bit 49 640KB ARM Cortex-M33 Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F446RCT6
LQFP-64(10x10)-40℃~+85℃ 1.7V~3.6V 128KB 12bit 12bit 180MHz 256KB 32 Bit 50 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AG32VF407RGT6
LQFP-64(10x10)LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSAGM MicroelectronicsMicrocontrollers (MCU/MPU/SOC)AT32F413RCT7
LQFP-64(10x10)-40℃~+105℃ 16KB、32KB、64KB 200MHz 256KB 55 ARM Cortex-M4F LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSARTERYMicrocontrollers (MCU/MPU/SOC)