Skip to the content
25

LAN8742AI-CZ-TR

Microchip TechnologyExtended

-40℃~+85℃ 1.8V~3.3V 12mA 12mA LAN8742A Open-drain Schmitt trigger VQFN-24-EP(4x4) Buffers, Drivers, Receivers, Transceivers ROHS

Part id
microchip/LAN8742AI-CZ-TR
Category
Buffers, Drivers, Receivers, Transceivers
Package
VQFN-24-EP(4x4)
Pins
25
In stock
7,643 at JLCPCB (C621425)
Used on
7 open-source boards

Overview

The LAN8742AI-CZ-TR is a buffers, Drivers, Receivers, Transceiver made by Microchip Technology in a VQFN-24-EP(4x4) package with 25 pins. -40℃~+85℃ 1.8V~3.3V 12mA 12mA LAN8742A Open-drain Schmitt trigger VQFN-24-EP(4x4) Buffers, Drivers, Receivers, Transceivers ROHS.

PCBKit's library has its KiCad symbol (Interface_Ethernet:LAN8742A, from KiCad's library) and its footprint (Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm, from KiCad's library), ready for a KiCad board. 7,643 are in stock at JLCPCB (part C621425). 7 open-source boards in 5 repositories on GitHub use it.

Symbol

1VDD2A2LED2/INTSEL3LED1/REGOFF4XTAL25XTAL1/CLKIN6VDDCR7RXD1/MODE18RXD0/MODE09VDDIO10RXER/PHYAD011CRS_DV/MODE212MDIO13MDC14INT/REFCLKO15RST16TXEN17TXD018TXD119VDD1A20TXN21TXP22RXN23RXP24RBIAS25VSS
Interface_Ethernet:LAN8742AFrom KiCad's library

Footprint

25
Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mmFrom KiCad's library

From the datasheet

18
Supply, least
1.62 V · VDDIO, recommended operating min · p. 103
Supply, most
3.6 V · VDDIO, recommended operating max · p. 103
Supply, least
3 V · VDD1A, VDD2A, recommended operating min · p. 103
Supply, least
1.14 V · VDDCR, recommended operating min · p. 103
Supply, most
1.26 V · VDDCR, recommended operating max · p. 103
Supply, least
2.25 V · Ethernet Magnetics Supply, recommended operating min · p. 103
Supply, absolute maximum
3.6 V · VDDIO, VDD1A, VDD2A, absolute max · p. 103
Supply, absolute maximum
1.5 V · VDDCR, absolute max · p. 103
Works from
-40 °C · Industrial ambient operating min · p. 103
Works up to
85 °C · Industrial ambient operating max · p. 103
Takes working
50 mA · Typical 100BASE-TX with traffic, REF_CLK IN, regulator enabled, device current · p. 104
Takes working
59 mA · Typical 100BASE-TX with traffic, REF_CLK OUT, regulator enabled, device current · p. 105
Takes working
47 mA · Typical sum of 3.3 V and 1.2 V device currents, 100BASE-TX with traffic, REF_CLK IN, regulator disabled · p. 104
Takes working
57 mA · Typical sum of 3.3 V and 1.2 V device currents, 100BASE-TX with traffic, REF_CLK OUT, regulator disabled · p. 105
Takes asleep
3.5 mA · Typical general power down, REF_CLK IN, regulator enabled · p. 104
Takes asleep
3.2 mA · Typical general power down, REF_CLK OUT, regulator enabled · p. 105
Junction to air (24-VQFN)
55.3 K/W · Junction to ambient, still air, stated value · p. 103
Data rate, most
100 Mbit/s · 100BASE-TX maximum supported data rate · p. 4

What it is and has

15
Ethernet PHY
10BASE-T/100BASE-TX, full duplex, RMII · p. 4
Cable diagnostics
Supported · p. 1
Wake on LAN
Supported · p. 1
HP Auto-MDIX
Supported · p. 1
Integrated regulator
1.2 V, disable feature · p. 1
Status LED outputs
2 · p. 1
Power-on reset
Integrated · p. 1
Package
24-pin VQFN, 4 x 4 mm, RoHS compliant · p. 1
Standards
IEEE 802.3 and 802.3u · p. 4
Ethernet PHY
Single-chip 10/100 Ethernet transceiver · p. 1
Auto-negotiation
Supported · p. 1
Polarity correction
Automatic polarity detection and correction · p. 1
Interface
RMII · p. 1
Integrated regulator
1.2 V, with disable feature · p. 1
Auto-MDIX
HP Auto-MDIX support · p. 1

Around it

4
other 1:1 ratio isolation transformer
between TXP/TXN and Twisted pair media; Common magnetics can carry 10BASE-T and 100BASE-TX signals. · p. 18
other 1:1 ratio magnetics
between RXP/RXN and Cable; Ethernet receive isolation magnetics. · p. 21
crystal 25 MHz
between XTAL1/CLKIN and XTAL2; Crystal or clock oscillator required in REF_CLK Out mode. · p. 110
crystal 25 MHz, 300 µW or 100 µW
between XTAL1 and XTAL2; Use matching parallel load capacitors; specifications for the 300 uW option are on page 113. · p. 113

Specifications

233
ParameterConditionsAs printedPage
Supply Voltage (VDDIO, VDD1A, VDD2A)See Note 1min -0.5 · max 3.6 V103
Digital Core Supply Voltage (VDDCR)See Note 1min -0.5 · max 1.5 V103
Ethernet Magnetics Supply Voltagemin -0.5 · max 3.6 V103
Negative voltage on input signal pins, with respect to groundExcludes RBIASmin -0.5 V103
Positive voltage on XTAL1/CLKIN, with respect to groundmax 3.6 V103
Storage Temperaturemin -55 · max 150 oC103
Supply Voltage (VDDIO)min 1.62 · max 3.6 V103
Analog Port Supply Voltage (VDD1A, VDD2A)min 3 · max 3.6 V103
Digital Core Supply Voltage (VDDCR)min 1.14 · max 1.26 V103
Ethernet Magnetics Supply Voltagemin 2.25 · max 3.6 V103
Ambient Operating Temperature in Still Air TAIndustrial versionmin -40 · max 85 °C103
Thermal Resistance ΘJAMeasured in still air from the die to ambient air; multi-layer 2S2P PCB per JESD51typ 55.3 oC/W103
Junction-to-Top-of-Package ΨJTMeasured in still air; multi-layer 2S2P PCB per JESD51typ 0.9 oC/W103
nRESET3.3 V Device Currenttyp 9.8 mA104
nRESET1.2 V Device Currenttyp 11 mA104
nRESET3.3 V Device Current w/ Magneticstyp 9.8 mA104
nRESETTotal Device Powertyp 50 mW104
100BASE-TX /W TRAFFIC3.3 V Device Currenttyp 27 mA104
100BASE-TX /W TRAFFIC1.2 V Device Currenttyp 20 mA104
100BASE-TX /W TRAFFIC3.3 V Device Current w/ Magneticstyp 70 mA104
100BASE-TX /W TRAFFICTotal Device Powertyp 124 mW104
10BASE-T /W TRAFFIC3.3 V Device Currenttyp 10 mA104
10BASE-T /W TRAFFIC1.2 V Device Currenttyp 13 mA104
10BASE-T /W TRAFFIC3.3 V Device Current w/ Magneticstyp 114 mA104
10BASE-T /W TRAFFICTotal Device Powertyp 54 mW104
ENERGY DETECT POWER DOWN3.3 V Device Currenttyp 4.6 mA104
ENERGY DETECT POWER DOWN1.2 V Device Currenttyp 2.1 mA104
ENERGY DETECT POWER DOWN3.3 V Device Current w/ Magneticstyp 4.6 mA104
ENERGY DETECT POWER DOWNTotal Device Powertyp 19 mW104
GENERAL POWER DOWN3.3 V Device Currenttyp 0.8 mA104
GENERAL POWER DOWN1.2 V Device Currenttyp 1.9 mA104
GENERAL POWER DOWN3.3 V Device Current w/ Magneticstyp 0.7 mA104
GENERAL POWER DOWNTotal Device Powertyp 5.3 mW104
nRESETDevice Currenttyp 21 mA104
nRESETDevice Current w/ Magneticstyp 21 mA104
nRESETTotal Device Powertyp 71 mW104
100BASE-TX /W TRAFFICDevice Currenttyp 50 mA104
100BASE-TX /W TRAFFICDevice Current w/ Magneticstyp 92 mA104
100BASE-TX /W TRAFFICTotal Device Powertyp 163 mW104
10BASE-T /W TRAFFICDevice Currenttyp 24 mA104
10BASE-T /W TRAFFICDevice Current w/ Magneticstyp 129 mA104
10BASE-T /W TRAFFICTotal Device Powertyp 81 mW104
ENERGY DETECT POWER DOWNDevice Currenttyp 6.8 mA104
ENERGY DETECT POWER DOWNDevice Current w/ Magneticstyp 6.9 mA104
ENERGY DETECT POWER DOWNTotal Device Powertyp 23 mW104
GENERAL POWER DOWNDevice Currenttyp 3.5 mA104
GENERAL POWER DOWNDevice Current w/ Magneticstyp 3.5 mA104
GENERAL POWER DOWNTotal Device Powertyp 12 mW104
nRESET3.3 V Device Currenttyp 20 mA105
nRESET1.2 V Device Currenttyp 11 mA105
nRESET3.3 V Device Current w/ Magneticstyp 20 mA105
nRESETTotal Device Powertyp 86 mW105
100BASE-TX /W TRAFFIC3.3 V Device Currenttyp 37 mA105
100BASE-TX /W TRAFFIC1.2 V Device Currenttyp 20 mA105
100BASE-TX /W TRAFFIC3.3 V Device Current w/ Magneticstyp 79 mA105
100BASE-TX /W TRAFFICTotal Device Powertyp 160 mW105
10BASE-T /W TRAFFIC3.3 V Device Currenttyp 20 mA105
10BASE-T /W TRAFFIC1.2 V Device Currenttyp 13 mA105
10BASE-T /W TRAFFIC3.3 V Device Current w/ Magneticstyp 124 mA105
10BASE-T /W TRAFFICTotal Device Powertyp 88 mW105
ENERGY DETECT POWER DOWN3.3 V Device Currenttyp 4.5 mA105
ENERGY DETECT POWER DOWN1.2 V Device Currenttyp 1.7 mA105
ENERGY DETECT POWER DOWN3.3 V Device Current w/ Magneticstyp 4.4 mA105
ENERGY DETECT POWER DOWNTotal Device Powertyp 18 mW105
GENERAL POWER DOWN3.3 V Device Currenttyp 1 mA105
GENERAL POWER DOWN1.2 V Device Currenttyp 1.3 mA105
GENERAL POWER DOWN3.3 V Device Current w/ Magneticstyp 0.9 mA105
GENERAL POWER DOWNTotal Device Powertyp 6.4 mW105
nRESETDevice Currenttyp 31 mA105
nRESETDevice Current w/ Magneticstyp 31 mA105
nRESETTotal Device Powertyp 103 mW105
100BASE-TX /W TRAFFICDevice Currenttyp 59 mA105
100BASE-TX /W TRAFFICDevice Current w/ Magneticstyp 102 mA105
100BASE-TX /W TRAFFICTotal Device Powertyp 195 mW105
10BASE-T /W TRAFFICDevice Currenttyp 34 mA105
10BASE-T /W TRAFFICDevice Current w/ Magneticstyp 139 mA105
10BASE-T /W TRAFFICTotal Device Powertyp 112 mW105
ENERGY DETECT POWER DOWNDevice Currenttyp 6.5 mA105
ENERGY DETECT POWER DOWNDevice Current w/ Magneticstyp 6.4 mA105
ENERGY DETECT POWER DOWNTotal Device Powertyp 21 mW105
GENERAL POWER DOWNDevice Currenttyp 3.2 mA105
GENERAL POWER DOWNDevice Current w/ Magneticstyp 3.2 mA105
GENERAL POWER DOWNTotal Device Powertyp 11 mW105
Low Input Level VILIIS Type Input Buffermin -0.3 V106
High Input Level VIHIIS Type Input Buffermax 3.6 V106
Negative-Going Threshold VILTIS Type Input Buffer; Schmitt triggermin 1.01 · typ 1.19 · max 1.39 V106
Positive-Going Threshold VIHTIS Type Input Buffer; Schmitt triggermin 1.39 · typ 1.59 · max 1.79 V106
Schmitt Trigger Hysteresis (VIHT - VILT) VHYSIS Type Input Buffermin 336 · typ 399 · max 459 mV106
Input Leakage IIHVIN = VSS or VDDIO; internal pull resistors add ±50 uA per pin typicalmin -10 · max 10 uA106
Input Capacitance CINIS Type Input Buffermax 2 pF106
Low Output Level VOLO12 Type Buffers; IOL = 12 mAmax 0.4 V106
Low Input Level VILIICLK Type Buffer (XTAL1 Input)min -0.3 · max 0.35 V106
High Input Level VIHIICLK Type Buffer (XTAL1 Input); minimum VDDCR-0.35 Vmax 3.6 V106
Low Input Level VILIVIS Type Input Buffermin -0.3 V107
High Input Level VIHIVIS Type Input Buffermax 3.6 V107
Neg-Going Threshold VILTVIS Type Input Buffer; 1.8 V VDDIO typical; Schmitt triggermin 0.64 · typ 0.83 · max 1.76 V107
Neg-Going Threshold VILTVIS Type Input Buffer; 2.5 V VDDIO typical; Schmitt triggermin 0.64 · typ 1.15 · max 1.76 V107
Neg-Going Threshold VILTVIS Type Input Buffer; 3.3 V VDDIO typical; Schmitt triggermin 0.64 · typ 1.41 · max 1.76 V107
Pos-Going Threshold VIHTVIS Type Input Buffer; 1.8 V VDDIO typical; Schmitt triggermin 0.81 · typ 0.99 · max 1.9 V107
Pos-Going Threshold VIHTVIS Type Input Buffer; 2.5 V VDDIO typical; Schmitt triggermin 0.81 · typ 1.29 · max 1.9 V107
Pos-Going Threshold VIHTVIS Type Input Buffer; 3.3 V VDDIO typical; Schmitt triggermin 0.81 · typ 1.65 · max 1.9 V107
Schmitt Trigger Hysteresis (VIHT - VILT) VHYSVIS Type Input Buffer; 1.8 V VDDIO typicalmin 102 · typ 158 · max 288 mV107
Schmitt Trigger Hysteresis (VIHT - VILT) VHYSVIS Type Input Buffer; 2.5 V VDDIO typicalmin 102 · typ 136 · max 288 mV107
Schmitt Trigger Hysteresis (VIHT - VILT) VHYSVIS Type Input Buffer; 3.3 V VDDIO typicalmin 102 · typ 138 · max 288 mV107
Input Capacitance CINVIS Type Input Buffermax 2 pF107
Low Output Level VOLVO8 Type Buffers; IOL = 8 mAmax 0.4 V107
Low Output Level VOLVOD8 Type Buffer; IOL = 8 mAmax 0.4 V107
Peak Differential Output Voltage High VPPHLine side of transformer; line replaced by 100 Ω (±1%) resistormin 950 · max 1050 mVpk107
Peak Differential Output Voltage Low VPPLLine side of transformer; line replaced by 100 Ω (±1%) resistormin -950 · max -1050 mVpk107
Signal Amplitude Symmetry VSSLine side of transformer; line replaced by 100 Ω (±1%) resistormin 98 · max 102 %107
Signal Rise and Fall Time TRFLine side of transformer; line replaced by 100 Ω (±1%) resistormin 3 · max 5 ns107
Rise and Fall Symmetry TRFSLine side of transformer; line replaced by 100 Ω (±1%) resistormax 0.5 ns107
Duty Cycle Distortion DCDOffset from 16 ns pulse width at 50% of pulse peakmin 35 · typ 50 · max 65 %107
Overshoot and Undershoot VOSmax 5 %107
JitterMeasured differentiallymax 1.4 ns107
Transmitter Peak Differential Output Voltage VOUTMin/max voltages measured with 100 Ω resistive loadmin 2.2 · typ 2.5 · max 2.8 V107
Receiver Differential Squelch Threshold VDSmin 300 · typ 420 · max 585 mV107
Power supply turn on time tponmax 50 ms108
Power supply turn off time tpoffmax 500 ms108
REFCLKO period tclkpmin 20 ns110
RXD[1:0], RXER, CRS_DV output valid from rising edge of REFCLKO tovalSystem load between 10 pf and 25 pfmax 7 ns110
RXD[1:0], RXER, CRS_DV output invalid from rising edge of REFCLKO toinvldSystem load between 10 pf and 25 pfmin 3 ns110
TXD[1:0], TXEN setup time to rising edge of REFCLKO tsuSystem load between 10 pf and 25 pfmin 7.5 ns110
TXD[1:0], TXEN input hold time after rising edge of REFCLKO tiholdSystem load between 10 pf and 25 pfmin 2 ns110
CLKIN frequencytyp 50 MHz112
CLKIN Frequency DriftMaximum ±50 ppmmax 50 ppm112
CLKIN Duty Cyclemin 40 · max 60 %112
CLKIN Jitterp-p – not RMSmax 150 ps112
MDC period tclkpmin 400 ns112
MDC high time tclkh160 (80%)min 160 ns112
MDC low time tclkl160 (80%)min 160 ns112
MDIO (read from PHY) output valid from rising edge of MDC tvalmax 300 ns112
MDIO (read from PHY) output invalid from rising edge of MDC toinvldmin 0 ns112
MDIO (write to PHY) setup time to rising edge of MDC tsumin 10 ns112
MDIO (write to PHY) input hold time after rising edge of MDC tiholdmin 10 ns112
Thermal Resistance ΘJAMeasured in still air from the die to ambient air; multi-layer 2S2P PCB per JESD51; single stated valuetyp 55.3 oC/W103
Junction-to-Top-of-Package ΨJTMeasured in still air; multi-layer 2S2P PCB per JESD51; single stated valuetyp 0.9 oC/W103
3.3 V Device CurrentnRESET; nominal suppliestyp 9.8 mA104
1.2 V Device CurrentnRESET; nominal suppliestyp 11 mA104
3.3 V Device Current w/ MagneticsnRESET; nominal suppliestyp 9.8 mA104
Total Device PowernRESET; nominal suppliestyp 50 mW104
3.3 V Device Current100BASE-TX /W TRAFFIC; nominal suppliestyp 27 mA104
1.2 V Device Current100BASE-TX /W TRAFFIC; nominal suppliestyp 20 mA104
3.3 V Device Current w/ Magnetics100BASE-TX /W TRAFFIC; nominal suppliestyp 70 mA104
Total Device Power100BASE-TX /W TRAFFIC; nominal suppliestyp 124 mW104
3.3 V Device Current10BASE-T /W TRAFFIC; nominal suppliestyp 10 mA104
1.2 V Device Current10BASE-T /W TRAFFIC; nominal suppliestyp 13 mA104
3.3 V Device Current w/ Magnetics10BASE-T /W TRAFFIC; nominal suppliestyp 114 mA104
Total Device Power10BASE-T /W TRAFFIC; nominal suppliestyp 54 mW104
3.3 V Device CurrentENERGY DETECT POWER DOWN; nominal suppliestyp 4.6 mA104
1.2 V Device CurrentENERGY DETECT POWER DOWN; nominal suppliestyp 2.1 mA104
3.3 V Device Current w/ MagneticsENERGY DETECT POWER DOWN; nominal suppliestyp 4.6 mA104
Total Device PowerENERGY DETECT POWER DOWN; nominal suppliestyp 19 mW104
3.3 V Device CurrentGENERAL POWER DOWN; nominal suppliestyp 0.8 mA104
1.2 V Device CurrentGENERAL POWER DOWN; nominal suppliestyp 1.9 mA104
3.3 V Device Current w/ MagneticsGENERAL POWER DOWN; nominal suppliestyp 0.7 mA104
Total Device PowerGENERAL POWER DOWN; nominal suppliestyp 5.3 mW104
Device CurrentnRESET; nominal suppliestyp 21 mA104
Device Current w/ MagneticsnRESET; nominal suppliestyp 21 mA104
Total Device PowernRESET; nominal suppliestyp 71 mW104
Device Current100BASE-TX /W TRAFFIC; nominal suppliestyp 50 mA104
Device Current w/ Magnetics100BASE-TX /W TRAFFIC; nominal suppliestyp 92 mA104
Total Device Power100BASE-TX /W TRAFFIC; nominal suppliestyp 163 mW104
Device Current10BASE-T /W TRAFFIC; nominal suppliestyp 24 mA104
Device Current w/ Magnetics10BASE-T /W TRAFFIC; nominal suppliestyp 129 mA104
Total Device Power10BASE-T /W TRAFFIC; nominal suppliestyp 81 mW104
Device CurrentENERGY DETECT POWER DOWN; nominal suppliestyp 6.8 mA104
Device Current w/ MagneticsENERGY DETECT POWER DOWN; nominal suppliestyp 6.9 mA104
Total Device PowerENERGY DETECT POWER DOWN; nominal suppliestyp 23 mW104
Device CurrentGENERAL POWER DOWN; nominal suppliestyp 3.5 mA104
Device Current w/ MagneticsGENERAL POWER DOWN; nominal suppliestyp 3.5 mA104
Total Device PowerGENERAL POWER DOWN; nominal suppliestyp 12 mW104
3.3 V Device CurrentnRESET; nominal suppliestyp 20 mA105
1.2 V Device CurrentnRESET; nominal suppliestyp 11 mA105
3.3 V Device Current w/ MagneticsnRESET; nominal suppliestyp 20 mA105
Total Device PowernRESET; nominal suppliestyp 86 mW105
3.3 V Device Current100BASE-TX /W TRAFFIC; nominal suppliestyp 37 mA105
1.2 V Device Current100BASE-TX /W TRAFFIC; nominal suppliestyp 20 mA105
3.3 V Device Current w/ Magnetics100BASE-TX /W TRAFFIC; nominal suppliestyp 79 mA105
Total Device Power100BASE-TX /W TRAFFIC; nominal suppliestyp 160 mW105
3.3 V Device Current10BASE-T /W TRAFFIC; nominal suppliestyp 20 mA105
1.2 V Device Current10BASE-T /W TRAFFIC; nominal suppliestyp 13 mA105
3.3 V Device Current w/ Magnetics10BASE-T /W TRAFFIC; nominal suppliestyp 124 mA105
Total Device Power10BASE-T /W TRAFFIC; nominal suppliestyp 88 mW105
3.3 V Device CurrentENERGY DETECT POWER DOWN; nominal suppliestyp 4.5 mA105
1.2 V Device CurrentENERGY DETECT POWER DOWN; nominal suppliestyp 1.7 mA105
3.3 V Device Current w/ MagneticsENERGY DETECT POWER DOWN; nominal suppliestyp 4.4 mA105
Total Device PowerENERGY DETECT POWER DOWN; nominal suppliestyp 18 mW105
3.3 V Device CurrentGENERAL POWER DOWN; nominal suppliestyp 1 mA105
1.2 V Device CurrentGENERAL POWER DOWN; nominal suppliestyp 1.3 mA105
3.3 V Device Current w/ MagneticsGENERAL POWER DOWN; nominal suppliestyp 0.9 mA105
Total Device PowerGENERAL POWER DOWN; nominal suppliestyp 6.4 mW105
Device CurrentnRESET; nominal suppliestyp 31 mA105
Device Current w/ MagneticsnRESET; nominal suppliestyp 31 mA105
Total Device PowernRESET; nominal suppliestyp 103 mW105
Device Current100BASE-TX /W TRAFFIC; nominal suppliestyp 59 mA105
Device Current w/ Magnetics100BASE-TX /W TRAFFIC; nominal suppliestyp 102 mA105
Total Device Power100BASE-TX /W TRAFFIC; nominal suppliestyp 195 mW105
Device Current10BASE-T /W TRAFFIC; nominal suppliestyp 34 mA105
Device Current w/ Magnetics10BASE-T /W TRAFFIC; nominal suppliestyp 139 mA105
Total Device Power10BASE-T /W TRAFFIC; nominal suppliestyp 112 mW105
Device CurrentENERGY DETECT POWER DOWN; nominal suppliestyp 6.5 mA105
Device Current w/ MagneticsENERGY DETECT POWER DOWN; nominal suppliestyp 6.4 mA105
Total Device PowerENERGY DETECT POWER DOWN; nominal suppliestyp 21 mW105
Device CurrentGENERAL POWER DOWN; nominal suppliestyp 3.2 mA105
Device Current w/ MagneticsGENERAL POWER DOWN; nominal suppliestyp 3.2 mA105
Total Device PowerGENERAL POWER DOWN; nominal suppliestyp 11 mW105
Neg-Going Threshold VILTVIS Type Input Buffer; 1.8 V typical column; Schmitt triggermin 0.64 · typ 0.83 · max 1.76 V107
Neg-Going Threshold VILTVIS Type Input Buffer; 2.5 V typical column; Schmitt triggermin 0.64 · typ 1.15 · max 1.76 V107
Neg-Going Threshold VILTVIS Type Input Buffer; 3.3 V typical column; Schmitt triggermin 0.64 · typ 1.41 · max 1.76 V107
Pos-Going Threshold VIHTVIS Type Input Buffer; 1.8 V typical column; Schmitt triggermin 0.81 · typ 0.99 · max 1.9 V107
Pos-Going Threshold VIHTVIS Type Input Buffer; 2.5 V typical column; Schmitt triggermin 0.81 · typ 1.29 · max 1.9 V107
Pos-Going Threshold VIHTVIS Type Input Buffer; 3.3 V typical column; Schmitt triggermin 0.81 · typ 1.65 · max 1.9 V107
Schmitt Trigger Hysteresis (VIHT - VILT) VHYSVIS Type Input Buffer; 1.8 V typical columnmin 102 · typ 158 · max 288 mV107
Schmitt Trigger Hysteresis (VIHT - VILT) VHYSVIS Type Input Buffer; 2.5 V typical columnmin 102 · typ 136 · max 288 mV107
Schmitt Trigger Hysteresis (VIHT - VILT) VHYSVIS Type Input Buffer; 3.3 V typical columnmin 102 · typ 138 · max 288 mV107
Input Leakage IIHVIN = VSS or VDDIO; all inputs and tri-stated bidirectional pins; internal pull resistors add ±50 uA per pin typicalmin -10 · max 10 uA107
Peak Differential Output Voltage High VPPHMeasured at line side of transformer; line replaced by 100 Ω (±1%) resistormin 950 · max 1050 mVpk107
Peak Differential Output Voltage Low VPPLMeasured at line side of transformer; line replaced by 100 Ω (±1%) resistor; limits retained in printed columnsmin -950 · max -1050 mVpk107
Signal Amplitude Symmetry VSSMeasured at line side of transformer; line replaced by 100 Ω (±1%) resistormin 98 · max 102 %107
Signal Rise and Fall Time TRFMeasured at line side of transformer; line replaced by 100 Ω (±1%) resistormin 3 · max 5 ns107
Rise and Fall Symmetry TRFSMeasured at line side of transformer; line replaced by 100 Ω (±1%) resistormax 0.5 ns107
Transmitter Peak Differential Output Voltage VOUTMin/max voltages guaranteed as measured with 100 Ω resistive loadmin 2.2 · typ 2.5 · max 2.8 V107
Frequency FfundNominaltyp 25 MHz113
Frequency Tolerance at 25oC FtolMaximum ±50 ppm; application dependent; see Note 1max 50 ppm113
Frequency Stability Over Temp FtempMaximum ±50 ppm; application dependent; see Note 1max 50 ppm113
Total Allowable PPM BudgetMaximum ±50 ppm; see Note 3max 50 ppm113
Shunt Capacitance COtyp 7 pF113
Load Capacitance CLtyp 20 pF113
Drive Level PWmin 300 uW113
Equivalent Series Resistance R1max 50 Ω113
XTAL1/CLKIN Pin CapacitanceSee Note 6typ 3 pF113
XTAL2 Pin CapacitanceSee Note 6typ 3 pF113

Pins, by the datasheet

25
1 VDD2A
Analog port supply. · p. 14
2 LED2/nINT/nPME/nINTSEL
Configurable LED2, interrupt or wake event output; nINTSEL configuration strap. · p. 14
3 LED1/nINT/nPME/REGOFF
Configurable LED1, interrupt or wake event output; REGOFF strap disables the internal regulator when high during reset. · p. 14
4 XTAL2
Crystal connection used with XTAL1/CLKIN in REF_CLK Out mode. · p. 14
5 XTAL1/CLKIN
Crystal or external clock input. · p. 14
6 VDDCR
Digital core supply; may be supplied by the integrated regulator. · p. 14
7 RXD1/MODE1
Receive data bit 1 and mode configuration strap. · p. 14
8 RXD0/MODE0
Receive data bit 0 and mode configuration strap. · p. 14
9 VDDIO
Variable voltage I/O supply. · p. 14
10 RXER/PHYAD0
Receive error output and PHY address configuration strap. · p. 14
11 CRS_DV/MODE2
Carrier sense and receive data valid output; mode configuration strap. · p. 14
12 MDIO
Serial management data input and output. · p. 14
13 MDC
Serial management clock input. · p. 14
14 nINT/REFCLKO
Interrupt or reference clock output. · p. 14
15 nRST
Active-low hardware reset. · p. 14
16 TXEN
Assert to indicate valid transmit data on TXD[1:0]. · p. 14
17 TXD0
Transmit data bit 0 from the MAC. · p. 14
18 TXD1
Transmit data bit 1 from the MAC. · p. 14
19 VDD1A
Analog port supply. · p. 14
20 TXN
Differential Ethernet transmit connection to external magnetics. · p. 14
21 TXP
Differential Ethernet transmit connection to external magnetics. · p. 14
22 RXN
Differential Ethernet receive connection from external magnetics. · p. 14
23 RXP
Differential Ethernet receive connection from external magnetics. · p. 14
24 RBIAS
RBIAS connection; function details not provided on the supplied pages. · p. 14
Exposed pad VSS
Exposed pad on the bottom of the package must be connected to ground. · p. 6

Open-source boards using it

7
  • 4 layers33.5 × 66.8 mmNet bmp, the printed circuit board in 3D

    Net bmp

    elagil/net-bmp

    An Ethernet-connected SWD/JTAG debug adapter (blackmagic probe)

    97 parts3GPL-3.0
  • 4 layers180 × 120 mmEdge18-main rev a, the printed circuit board in 3D

    Edge18-main rev a

    Gecesars/18-gateway-industrial

    Gateway Industrial Modbus/CAN Universal — baseline técnica e acompanhamento do projeto

    185 parts
  • 4 layers85 × 76 mmValvedrivers, the printed circuit board in 3D

    Valvedrivers

    npgo22/APRL-Electrical-New

    To use the board templates, set KICADUSERTEMPLATEDIR by:

    145 parts
  • 4 layers85 × 76 mmPressuretransducers, the printed circuit board in 3D

    Pressuretransducers

    npgo22/APRL-Electrical

    PCBs for APRL electrical

    183 parts
  • 4 layers98.5 × 122.4 mmVbench pod, the printed circuit board in 3D

    Vbench pod

    embeddedci-com/benchpod

    An open hardware bench tool that plugs into your CI: sensor sim, CAN, analog I/O, power control, and a Python SDK with pytest integration

    335 parts2CERN-OHL-W-2.0
  • 4 layers85 × 76 mmLoad cell, the printed circuit board in 3D

    Load cell

    npgo22/APRL-Electrical

    PCBs for APRL electrical

    113 parts
  • 4 layers52 × 76 mmIsospi transceiver, the printed circuit board in 3D

    Isospi transceiver

    npgo22/APRL-Electrical-New

    To use the board templates, set KICADUSERTEMPLATEDIR by:

    85 parts

Questions

Is there a KiCad symbol and footprint for the LAN8742AI-CZ-TR?

Yes. The symbol is Interface_Ethernet:LAN8742A and the footprint Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LAN8742AI-CZ-TR?

VQFN-24-EP(4x4), with 25 pins. Its footprint is drawn on this page.

Where is the LAN8742AI-CZ-TR datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the LAN8742AI-CZ-TR?

JLCPCB lists it as part C621425, with 7,643 in stock; the sellers' links on this page open their listings.

Which open-source boards use the LAN8742AI-CZ-TR?

7 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.