
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!

Cnc grbl lcd is an open-source printed circuit board by emavap, from the emavap/Grbl-Pro-LCDconn-PCB repository on GitHub. It is a 2-layer board of 60.5 × 34.3 mm with 16 parts on 28 nets, routed with 314 tracks and 27 vias.
It is built around the ATMEGA328P-AU. Its parts include 7 connectors, 5 capacitors, 2 resistors, 1 IC and 1 crystal. It belongs with the robots and motor control and lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Creative-Commons 3.0 CC BY-SA
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitors_SMD:C_1206 | C1, C2 |
| 2 | 1K | Resistors_SMD:R_1206 | R3, R4 |
| 2 | 20pF | Capacitors_SMD:C_1206 | C7, C8 |
| 1 | 16Mhz | Crystals:Crystal_HC49-SD_SMD | Y1 |
| 1 | 3.3nF | Capacitors_SMD:C_1206 | C3 |
| 1 | ATMEGA328P-A | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC1 |
| 1 | CON | Pin_Headers:Pin_Header_Straight_2x04 | P12 |
| 1 | CTR | Pin_Headers:Pin_Header_Straight_2x03 | P11 |
| 1 | EXP1 | Pin_Headers:Pin_Header_Straight_2x05 | P3 |
| 1 | EXP2 | Pin_Headers:Pin_Header_Straight_2x05 | P4 |
| 1 | ICSP | Pin_Headers:Pin_Header_Straight_2x03 | P2 |
| 1 | ICSP-Main | Pin_Headers:Pin_Header_Straight_2x03 | P1 |
| 1 | TRX | Pin_Headers:Pin_Header_Straight_2x03 | P13 |

dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!


profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance

futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.


sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino

SukkoPera/OpenPSX2AmigaPadAdapter
Playstation to Commodore Amiga/CD32 Controller Adapter

4x1md/vx8_gps
DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.
It measures 60.5 × 34.3 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the ATMEGA328P-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the emavap/Grbl-Pro-LCDconn-PCB repository on GitHub, at the commit this page was made from: the board is cnc-grbl-lcd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask emavap before reusing the design.