2 layers99.7 × 63.9 mm
NES CN ROM-256-05
emeargt/nes-cnrom
KiCad project for NES-CN-ROM-256-05 cartridge schematic and PCB
17 parts31CC-BY-SA-4.0
2 layers37.8 × 33.7 mm
Temperature kicad
Electroshare/temperature-sensorA temperature sensor that runs on a battery
- Size
- 37.8 × 33.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 13
- Pads
- 44
- Tracks, vias
- 94, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Jun 2018
- Updated
- 7 Apr 2019
Overview
Temperature kicad is an open-source printed circuit board by Electroshare, from the Electroshare/temperature-sensor repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 37.8 × 33.7 mm with 15 parts on 13 nets, routed with 94 tracks and 4 vias.
It is built around the ATTINY13A-PU, NRF24L01 and DS18B20. Its parts include 4 resistors, 4 ICs, 3 capacitors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY13A-PU
DIP-8-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH DIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
NRF24L01
QFN-20-EP(4x4)-40℃~+85℃ -85dBm 0dBm 1.9V~3.6V 2.4GHz 2Mbps CRC check function、Automatic response function、Automatic retransmission function SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature Sensors
README
README.mdtemperature-sensor
A temperature sensor run on battery, which sends its data over a nRF24L01 chip.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3 |
| 1 | 0.1µF | Capacitors_THT:C_Disc_D10.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 10k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 1µF | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 2.2µF | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 4.7k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | ATTINY13A-PU | Housings_DIP:DIP-8_W7.62mm | U4 |
| 1 | Battery_Cell | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | BT1 |
| 1 | D | Diodes_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | DS18B20 | TO_SOT_Packages_THT:TO-92_Inline_Wide | U2 |
| 1 | LD2980 | TO_SOT_Packages_SMD:SOT-23-5 | U3 |
| 1 | Measurement_Point_Round-SMD-Pad_Big | Measurement_Points:Measurement_Point_Round-SMD-Pad_Big | THERM |
| 1 | MountingHole_3.2mm_M3_Pad | Mounting_Holes:MountingHole_3.2mm_M3_Pad | MNT |
| 1 | nRF24L01 | Socket_Strips:Socket_Strip_Straight_2x04_Pitch2.54mm | U1 |
Questions
How big is the Temperature kicad PCB?
It measures 37.8 × 33.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Temperature kicad use?
15 parts, built around the ATTINY13A-PU, NRF24L01 and DS18B20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Temperature kicad KiCad files?
From the Electroshare/temperature-sensor repository on GitHub, at the commit this page was made from: the board is temperature_kicad/temperature_kicad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Temperature kicad design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 61.4 mm
Cart
digilogistist/The-Open-Source-USB-NES-Project
USB-NES and NES-FASTGFX product engineering repository
38 parts24CC0-1.0 - 2 layers100 × 100 mm
- 2 layers22.9 × 30.7 mm
- 4 layers243.8 × 243.8 mm
- 6 layers100.1 × 112 mm
Picones
WiiMake/picones
In the last 40 years, technology has advanced to the point were what used to be done in hardware can now be done in software. This project uses an rp2350 to emulate a ROM chip on an NES Cartridge.
59 parts1 - 2 layers27.9 × 15.2 mm
- 2 layers140 × 60 mm
A277d led tachometer
bazsimarkus/a277d-led-tachometer
An analog LED tachometer controlled by an East German A277D chip (clone of UAA180), featuring an integrated ATtiny13A-based digital ignition pulse generator for testing.
61 parts