4 layers144 × 133 mm
2 layers69.6 × 26.4 mm
ESP32-C6-DevBoard
Ekmansoft/ESP32-C6-DevBoard-1ESP32 Devboard test
- Size
- 69.6 × 26.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 81
- Pads
- 256
- Tracks, vias
- 361, 40
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 May 2025
- Updated
- 27 Aug 2025
Overview
ESP32-C6-DevBoard is an open-source printed circuit board by Ekmansoft, from the Ekmansoft/ESP32-C6-DevBoard-1 repository on GitHub, published under the MIT licence. It is a 2-layer board of 69.6 × 26.4 mm with 43 parts on 81 nets, routed with 361 tracks and 40 vias.
It is built around the CP2104EK, ESP32-C6-MINI-1 and TLV76133DCY, with the BC847 and TS-1088-AR02016 among its other parts. Its parts include 13 resistors, 9 capacitors, 9 diodes, 5 connectors and 3 ICs. It belongs with the microcontroller boards boards and the ESP32 and RISC-V boards of this library.
Main components
5CP2104EK
-- USB Conversion Modules ROHSSilicon LabsUSB Conversion Modules
ESP32-C6-MINI-1
SMD,13.2x16.6mmSMD,13.2x16.6mm New Arrivals ROHSEspressif SystemsUncategorised
TLV76133DCY
SOT-223-40℃~+125℃ 1 1.6V@(1A) 16V 1A 3.3V 60dB@(1kHz) 60uA 60uVrms Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Input under-voltage protection、Built-in soft-start Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
TS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches
README
README.mdESP32-C6-DevBoard-1
Open source ESP32-C6 Devboard
Intended to be useful for others when it is done.
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | SD05_SOD323 | Diode_SMD:D_SOD-882 | D6, D8, D9, D10, D11, D12 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C7, C8 |
| 4 | 5k1 | Resistor_SMD:R_0603_1608Metric | R1, R2, R7, R8 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C4, C6, C9 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R11, R14 |
| 3 | LED Green | LED_SMD:LED_0603_1608Metric | D1, D4, D5 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 620 | Resistor_SMD:R_0603_1608Metric | R13, R15 |
| 2 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x16_Pin | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J5, J6 |
| 2 | TS-1088-AR02016 | TS-1088-AR02016:SW_TS-1088-AR02016 | S1, S2 |
| 2 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1, J4 |
| 1 | 1.0uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | CP2104 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | ESP32-C6-MINI-1 | RF_Module:ESP32-C6-MINI-1 | U1 |
| 1 | TLV76133DCY | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
Questions
How big is the ESP32-C6-DevBoard PCB?
It measures 69.6 × 26.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32-C6-DevBoard use?
43 parts, built around the CP2104EK, ESP32-C6-MINI-1, TLV76133DCY and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-C6-DevBoard KiCad files?
From the Ekmansoft/ESP32-C6-DevBoard-1 repository on GitHub, at the commit this page was made from: the board is ESP32-C6-DevBoard.kicad_pcb and its schematic ESP32-C6-DevBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-C6-DevBoard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers165 × 135 mm
Countdown timer
MartinCowen/countdown-timer-hardware
Child-friendly Countdown Timer: KiCad projects for PCB and Front Panel
111 partsMIT - 4 layers26 × 108 mm
- 2 layers69 × 68.7 mm
SGW-01 V1.0
ymhtwe/SGW01
ESP-IDF based IoT gateway for solar pump monitoring and control using SIM7600 4G modem and Modbus RTU.
133 parts - 4 layers106.7 × 69.1 mm
- 4 layers48.5 × 39 mm
Bbq monitor
harrydobbs/bbq-temperature-monitor
STM32 Microcontroller equipped with 2.4GHz Transceiver and K-Type Thermocouple
50 parts1 - 2 layers216.1 × 132.9 mm
Ferrari-488-gt3-pcb
nicolasfara/ferrari-488-gt3-wheel
Ferrari 488 GT3 Sim Wheel replica
32 parts1CC0-1.0 - 4 layers225 × 185.6 mm
PCB schematics with overcurrent protection
SA-04/Data-Recorder-GWRC-
An open source and open hardware IoT-connected SDI-12-enabled remote data recorder capable of deployment for environmental monitoring by New Zealand Regional Councils.
129 parts