Skip to the content
4 layers225 × 185.6 mmPCB schematics with overcurrent protection, the printed circuit board in 3D

PCB schematics with overcurrent protection

SA-04/Data-Recorder-GWRC-

An open source and open hardware IoT-connected SDI-12-enabled remote data recorder capable of deployment for environmental monitoring by New Zealand Regional Councils.

Size
225 × 185.6 mm
Copper layers
4
Thickness
1.6 mm
Parts
129
Nets
128
Pads
445
Tracks, vias
1,149, 630
Pours
46
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
17 Aug 2026
Updated
17 Aug 2026

Overview

PCB schematics with overcurrent protection is an open-source printed circuit board by SA-04, from the SA-04/Data-Recorder-GWRC- repository on GitHub. It is a 4-layer board of 225 × 185.6 mm with 129 parts on 128 nets, routed with 1,149 tracks and 630 vias.

It is built around the CP2104EK, ESP32-WROVER-B and LM2831XMF, with the PCF8574ADWR, LM393N(LX) and SN74LS00DR(LX) among its other parts. Its parts include 39 resistors, 33 capacitors, 10 ICs, 10 transistors and 9 connectors. It belongs with the ESP32 boards of this library.

Main components

12

README

README.md

Open Data Recorder for Environmental Monitoring

An open source and open hardware IoT-connected SDI-12-enabled remote data recorder capable of deployment for environmental monitoring by New Zealand Regional Councils.

Quick Links

Project Description

Regional Councils maintain large environmental monitoring networks with real-time data recorded by data recorders being reported via telemetry to virtual servers at a data centre.

This project arose from the desire of the Hydrology Team at Greater Wellington Council to explore the benefits that IoT technologies could offer — low-cost hardware, low power consumption, future-proof communication technologies and the ability of Council staff to extend the capabilities of the data recorder — whilst maintaining the sensor accuracy required for scientific studies and regulatory functions. In collaboration with staff and students at the School of Engineering and Computer Science at Victoria University of Wellington, a prototype data recorder has been developed to meet the environmental monitoring requirements of they Hydrology Team.

Project Requirements

Overarching project requirements are listed in docs/requirements/requirements.md.

Overall Objectives

  • Develop a system to enable more cost effective collection of data to serve the Region's environmental data needs.
  • Deliver an 'Open-Source' system that is fully documented which will allow GWRC staff to up-skill and understand IoT concepts and provide GWRC IT department the ability to support the server and data transfer components in the future. Hardware construction would need to be well documented to allow future production of devices post-project.
  • Enable future development of the system in collaboration with VUW.
  • Develop a system that could be offered to other Regional Councils around New Zealand if successful.

The project can be as big or as small as the project team decides. The main thing is to ensure we end up with a robust, accurate system that can be evaluated against our current systems. GWRC will be able to provide test sites locations and VUW project team will be able exposed to the work the council undertakes - Field trip(s)?

GWRC doesn't have any set funding for the project and monetary contributions can be discussed if the project is of interest to VUW. I should imagine GWRC would be able to pay for the virtual server chargers, software licences and hardware but that is to be confirmed with management.

Repository Directory Structure

High level overview

text
Environmental-Monitoring-2020/engr489-project/
├── docs
├── software
    ├── device
        ├── embedded
        └── webapp
    ├── server
    └── simulator
├── hardware
├── util
└── venv

software: Embedded Software and Device Simulators

device: Embedded Software, Web-App Code
text
device
├── build
├── embedded
└── webapp
  • build: automatically created by the software build script, build.sh.
  • embedded: Micropython device code — development takes place here.
  • webapp: preact web app code — development takes place here.
server: scripts for communication with remote servers
text
server/
[no subdirectories]

Python scripts for publishing to an MQTT broker and subscribing to topics. Also contains a Python script for publishing to Microsoft Power BI https://powerbi.microsoft.com/. Used during exploration of different protocols for transmitting data from the data recorder.

simulator: Simulation Scripts
text
simulator/
[no subdirectories]

Various scripts for simulating different parts of the project.

docs: Documents and Documentation

text
docs
├── bom
├── datasheets
├── development
├── literature
├── meetings
├── presentations
├── reports
├── requirements
├── research
└── technical
  • bom: Bill of Materials (BoM) documents sent for PCB manufacture.
  • technical: technical documentation, including documentation of the tinyweb server implementation which runs on the ESP32 to provide a web interface to the data recorder.
  • literature: A flat folder containing PDF copies of anything that will or could be cited in the reports: journal articles, tech notes, etc. There should be a BibTeX .bib bibliography file at the same level as the PDF files, for use with the JabRef open source bibliography and reference manager.
  • meetings: saved emails from the 2021 Honours project.
  • presentations: The files used in any presentations, including the ENGR 489 course final presentation.
  • reports: Contains the ENGR 489 course reports. There are two reports required this year, a Preliminary Report and a Final Report. LaTeX source files. R, Matlab, etc. files, containing only the figures used in the report at this level. One sub-folder "Figures" to keep figures organised.
  • requirements: documentation provided by the clients for project requirements.
  • research: Embedded software, Web App, Hardware Design and PCB development notes.

hardware: Data Recorder Hardware

text
hardware/
├── reviews
└── schematics
  • reviews: documentation of schematics and PCB reviews.
  • schematics: electronic schematics and PCB designs of the current revision.

util: utility scripts

text
util/
├── Docker
├── ansible
├── micropython-hitl
├── micropython-software
├── scripts
└── vagrant

Build and test scripts, including development and test environment provisioning and configuration scripts, for performing utility functions separate from the software running on the data recorder.

  • Docker: Dockerfiles to create images used in jobs in the GitLab CI pipeline.
  • ansible: Ansible playbooks for provisioning development, build and test environments.
  • micropython-hitl: hardware-in-the-loop (HTL) testing scripts.
  • micropython-software: Dockerfile for running MicroPython in a Docker container for development and test purposes.
  • scripts: build and test scripts mostly intended to be run in the CI pipeline.
  • vagrant: Vagrantfile for testing of provisioning and configuration of HTL build and test servers in a VirtualBox VM.

venv: Python Virtual Environment

Python virtual environment created when the instructions in the Development Environment section of the Technical Documentation are followed.


Parts

129
QtyValueFootprintReferences
16100nFMainLibrary.PcbLib:CAPC1608X80NC100, C102, C106, C201, C203, C204, C205, C304, C305, C307, C308, C400, C402, C403, C404, C502
1410KMainLibrary.PcbLib:RESC1608X50NR100, R103, R104, R105, R204, R205, R210, R301, R305, R306, R400, R401, R403, R404
8100MainLibrary.PcbLib:RESC1608X50NR106, R107, R206, R207, R208, R209, R212, R214
710uFMainLibrary.PcbLib:CAPC2012X90NC101, C103, C104, C105, C302, C303, C501
622uFMainLibrary.PcbLib:CAPC2012X90NC300, C301, C306, C309, C310, C500
6RevPolFPHC_DbLib.DbLib:TP150TP100, TP101, TP102, TP103, TP104, TP105
31MMainLibrary.PcbLib:RESC1608X50NR500, R501, R502
31N5819HW1-7-FMainLibrary.PcbLib:SODFL3700X115ND100, D300, D303
3FDN360PMainLibrary.PcbLib:SOT95P240X110_123_SUPER-3NQ300, Q301, Q500
3RevPolMainLibrary.PcbLib:TP150TP106, TP301, TP304
2100KMainLibrary.PcbLib:RESC1608X50NR200, R303
2100uFMainLibrary.PcbLib:CAPC1608X80NC311, C503
22N7002MainLibrary.PcbLib:SOT95P240X130_123-3NQ200, Q202
24.7uHMainLibrary.PcbLib:IND_SRN5040-4R7M_SML300, L301
2470MainLibrary.PcbLib:RESC1608X50NR101, R102
2BC847MainLibrary.PcbLib:SOT95P240X130_123-3NQ100, Q101
2FDN361BNMainLibrary.PcbLib:SOT95P240X110_231_SUPER-3NQ501, Q502
10MainLibrary.PcbLib:RESC1608X50NR503
10.1MainLibrary.PcbLib:RESC2012X50NR213
110KFPHC_DbLib.DbLib:RESC1608X50NR402
1165KMainLibrary.PcbLib:RESC1608X50NR201
116K5MainLibrary.PcbLib:RESC1608X50NR203
11uFMainLibrary.PcbLib:CAPC1608X80NC202
13.3nFMainLibrary.PcbLib:CAPC1608X80NC200
1300KMainLibrary.PcbLib:RESC1608X50NR202
13K3MainLibrary.PcbLib:RESC2012X50NR302
13V3MainLibrary.PcbLib:TP150TP302
14K7MainLibrary.PcbLib:RESC1608X50NR405
156KMainLibrary.PcbLib:RESC1608X50NR300
15K3MainLibrary.PcbLib:RESC1608X50NR304
15VMainLibrary.PcbLib:TP150TP300
174HC590D,118MainLibrary.PcbLib:SOIC127P600X175-16NU401
1BATTConnector_SMD:WURTH_691709710302J300
1BQ34Z110PWRMainLibrary.PcbLib:SOP65P640X120-14NIC200
1BSS84MainLibrary.PcbLib:SOT95P240X130_123-3NQ201
1BZT52C5V6T-7MainLibrary.PcbLib:SOD523D200
1CP2104MainLibrary.PcbLib:QFN50P400X400X90-25NU100
1CRS08MainLibrary.PcbLib:SODFL3500X98ND302
1ESP32-WROVER-BMainLibrary.PcbLib:IC_ESP32-WROVERU101
1Grain_gaugeConnector_SMD:WURTH_691709710302J400
1I2CMainLibrary.PcbLib:CON_NPTC041KFXC-RC_SMJ103
1LM2831XMFMainLibrary.PcbLib:SOT95P279X142-12345-5NU301
1LM393-NMainLibrary.PcbLib:SOIC127P600X175-8NU402
1M1MainLibrary.PcbLib:HOLN_M3MH100
1M2MainLibrary.PcbLib:HOLN_M3MH101
1M3MainLibrary.PcbLib:HOLN_M3MH103
1MODEM_AMainLibrary.PcbLib:CON_0878980826_SMJ105
1MODEM_BMainLibrary.PcbLib:CON_0878980826_SMJ106
1PCF8574ADWRMainLibrary.PcbLib:SOIC127P1030X265-16NU400
1Push_ButtonMainLibrary.PcbLib:SW_B3S-1000P_SMSW100
1RED_LEDMainLibrary.PcbLib:LED_19-217{slash}B7C-ZL2N1B3X{slash}3T_SMD301
1RGBLEDMainLibrary.PcbLib:LED_APTF1616SEEZGQBDC_SMD101
1R_1206_3216MetricResistor_SMD:R_1206_3216MetricF500
1SDCARDMainLibrary.PcbLib:CON_MEM2075-00-140-01-AJ102
1SDI-12MainLibrary.PcbLib:CON_691508110304_SMJ500
1SDI_RxMainLibrary.PcbLib:TP150TP502
1SDI_TxMainLibrary.PcbLib:TP150TP501
1SN74LS00DRMainLibrary.PcbLib:SOIC127P600X175-14NU500
1SN74LVC2G241DCURMainLibrary.PcbLib:SOP50P320X90-8NU501
1SP200MainLibrary.PcbLib:STAR_TH_2PSP200
1TPS562201DDCRMainLibrary.PcbLib:SOT95P305X110-6NU300
1USB_B_MicroMainLibrary.PcbLib:CON_1050170001J100
1WIFI_ENMainLibrary.PcbLib:CON_NPTC041KFXC-RC_SMJ104

Similar boards

  • 4 layers220 × 160 mmQds cv, the printed circuit board in 3D

    Qds cv

    cnpem-emi/qds-cv-hw

    Quench detection system for a single superconducting coil working in the Vertical Cryostat.

    403 parts
  • 4 layers68.6 × 68.6 mmEspena dual button doorbell door bell, the printed circuit board in 3D

    Espena dual button doorbell door bell

    punkfab/pcb-corpus

    235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

    79 parts1
  • 4 layers90 × 80 mmLaser Driver v3, the printed circuit board in 3D

    Laser Driver v3

    Laser4DIY/Laser-Driver-v2

    MCU-based multipurpose Laser Diode driver

    102 parts23
  • 6 layers85 × 56 mmKarnix ASB, the printed circuit board in 3D

    Karnix ASB

    Fabmicro-LLC/Karnix_ASB-254

    Karnaugh Interactive Extendable ASIC Simulation Board AKA Karnix ASB-254

    368 parts19
  • 2 layers96 × 90 mmTPP, the printed circuit board in 3D

    TPP

    juan-LARRAYA/TPP

    Sistema de Gestión de Energía para Satélites Cubesat

    268 parts
  • 2 layersIR Schreib Lesekopf RS232 Neu, the printed circuit board in 3D

    IR Schreib Lesekopf RS232 Neu

    greenMikeEU/shrdzm

    SHRDZM (just a name, not an acronym) is an ESP8285/ESP8266 based sensor and actor integration platform.

    24 partsGPL-3.0

Questions

How big is the PCB schematics with overcurrent protection PCB?

It measures 225 × 185.6 mm and has 4 copper layers, 1.6 mm thick.

What parts does the PCB schematics with overcurrent protection use?

129 parts, built around the CP2104EK, ESP32-WROVER-B, LM2831XMF and PCF8574ADWR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PCB schematics with overcurrent protection KiCad files?

From the SA-04/Data-Recorder-GWRC- repository on GitHub, at the commit this page was made from: the board is hardware/schematics/PCB_schematics_with_overcurrent_protection/main_board.kicad_pcb and its schematic hardware/schematics/PCB_schematics_with_overcurrent_protection/sdi-12.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PCB schematics with overcurrent protection design in my own project?

Its repository states no licence, so its author keeps all rights: ask SA-04 before reusing the design.