
CRS08
ShikuesExtended
-55℃~+125℃ 1.5A 40V 500uA@40V 50A 550mV@2A Independent SOD-123FL Schottky Diodes ROHS
- Part id
- shikues/CRS08
- Category
- Schottky Diodes
- Package
- SOD-123FL
- Pins
- 2
- In stock
- 2,748 at JLCPCB (C475662)
- Used on
- 9 open-source boards
Overview
The CRS08 is a schottky Diode made by Shikues in a SOD-123FL package with 2 pins. -55℃~+125℃ 1.5A 40V 500uA@40V 50A 550mV@2A Independent SOD-123FL Schottky Diodes ROHS.
PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (Diode_SMD:D_SOD-123F, from KiCad's library), ready for a KiCad board. 2,748 are in stock at JLCPCB (part C475662). 9 open-source boards in 6 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
5- Reverse voltage, most
- 40 V · max repetitive peak reverse voltage · p. 1
- Forward current, most
- 1.5 A · max average forward rectified current, 25 °C ambient · p. 1
- Forward voltage
- 550 mV · max instantaneous forward voltage at 2 A · p. 1
- Junction to air (SOD-123FL)
- 80 K/W · typical, PCB mounted with 5 × 5 mm copper pad areas · p. 1
- Junction, hottest
- 125 °C · max operating junction temperature · p. 1
What it is and has
4- Junction
- Metal silicon junction, majority carrier conduction · p. 1
- Package
- SOD-123FL · p. 1
- Power loss
- Low power loss, high efficiency · p. 1
- Surge capability
- High forward surge current capability · p. 1
Specifications
12| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Maximum Repetitive Peak Reverse Voltage V RRM | 25 °C ambient unless otherwise specified | max 40 V | 1 |
| Maximum RMS voltage V RMS | 25 °C ambient unless otherwise specified | max 28 V | 1 |
| Maximum DC Blocking Voltage V DC | 25 °C ambient unless otherwise specified | max 40 V | 1 |
| Maximum Average Forward Rectified Current I F(AV) | 25 °C ambient; single phase, half wave, 60Hz resistive or inductive load; for capacitive load, derate by 20 % | max 1.5 A | 1 |
| Peak Forward Surge Current,8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) I FSM | 25 °C ambient; 8.3ms single half sine-wave superimposed on rated load (JEDEC method) | max 50 A | 1 |
| Max Instantaneous Forward Voltage at 2 A VF | Forward current 2 A; 25 °C ambient | max 0.55 V | 1 |
| Maximum DC Reverse Current at Rated DC Reverse Voltage IR | T a = 25°C; at rated DC reverse voltage | max 0.5 mA | 1 |
| Maximum DC Reverse Current at Rated DC Reverse Voltage IR | T a =100°C; at rated DC reverse voltage | max 5 mA | 1 |
| Typical Junction Capacitance 1) Cj | Measured at 1MHz and applied reverse voltage of 4 V D.C.; 25 °C ambient | typ 220 pF | 1 |
| Typical Thermal Resistance 2) RθJA | SOD-123FL; P.C.B. mounted with 0.2 X 0.2" (5 X 5 mm) copper pad areas | typ 80 °C/W | 1 |
| Operating Junction Temperature Range Tj | min -55 · max 125 °C | 1 | |
| Storage Temperature Range T stg | min -55 · max 150 °C | 1 |
Pins, by the datasheet
2- 1 Cathode
- Cathode · p. 1
- 2 Anode
- Anode · p. 1
- 4 layers90 × 80 mm

- 6 layers85 × 56 mm

Karnix ASB
Fabmicro-LLC/Karnix_ASB-254
Karnaugh Interactive Extendable ASIC Simulation Board AKA Karnix ASB-254
368 parts19 - 2 layers

IR Schreib Lesekopf RS232 Neu
ju6ge/volkszaehler_ir_pcbs_kicad
Converted Volkszaehler PCB Layouts to KiCAD
24 parts - 2 layers96 × 90 mm

- 4 layers225 × 185.6 mm

PCB schematics with overcurrent protection
SA-04/Data-Recorder-GWRC-
An open source and open hardware IoT-connected SDI-12-enabled remote data recorder capable of deployment for environmental monitoring by New Zealand Regional Councils.
129 parts - 2 layers

IR Schreib Lesekopf RS232 Neu
greenMikeEU/shrdzm
SHRDZM (just a name, not an acronym) is an ESP8285/ESP8266 based sensor and actor integration platform.
24 partsGPL-3.0 - 2 layers96 × 90 mm

- 2 layers96 × 90 mm

Parts like it
8DSK34
SOD-123FLSchottky DiodeshongjiachengDSK210
SOD-123FLSchottky DiodeshongjiachengDSK24
SOD-123FLSchottky DiodeshongjiachengDSK34
SOD-123FL-55℃~+125℃ 3A 40V 500uA 520mV@3A 80A Independent SOD-123FL Schottky Diodes ROHSTWGMCSchottky DiodesDSK26
SOD-123FLSchottky DiodeshongjiachengDSK34
SOD-123FL-55℃~+150℃ 3A 40V 500uA@40V 550mV@3A 80A Independent SOD-123FL Schottky Diodes ROHSMDDSchottky DiodesK26
SOD-123FL-65℃~+150℃ 100uA 2A 50A 60V 700mV@2A Independent SOD-123FL Schottky Diodes ROHSGOODWORKSchottky DiodesDSL34
SOD-123FLSchottky Diodeshongjiacheng
Questions
Is there a KiCad symbol and footprint for the CRS08?
Yes. The symbol is Device:D_Schottky and the footprint Diode_SMD:D_SOD-123F, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the CRS08?
SOD-123FL, with 2 pins. Its footprint is drawn on this page.
Where is the CRS08 datasheet?
Shikues publishes it: the Datasheet link on this page opens it.
Where can I order the CRS08?
JLCPCB lists it as part C475662, with 2,748 in stock; the sellers' links on this page open their listings.
What can replace the CRS08?
Parts like it in the library: the DSK34 by hongjiacheng, the DSK210 by hongjiacheng, the DSK24 by hongjiacheng and the DSK34 by TWGMC. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the CRS08?
9 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.