Skip to the content
12345

LM2831XMF

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 1.5A 1.6MHz 3.3mA 3V~5.5V 600mV~4.5V Adjustable Buck Buck Built-in No SOT-23-5 DC-DC Converters ROHS

Part id
ti/LM2831XMF
Category
DC DC Converters
Package
SOT-23-5
Pins
5
In stock
0 at JLCPCB (C131989)
Used on
1 open-source board

Overview

The LM2831XMF is a DC DC Converter made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(TJ) 1 1.5A 1.6MHz 3.3mA 3V~5.5V 600mV~4.5V Adjustable Buck Buck Built-in No SOT-23-5 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS61040DBVRG, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C131989). 1 open-source board in 1 repository on GitHub use it.

Symbol

5VIN4EN3FB2GND1SW
EasyEDA_Cloud:TPS61040DBVRGFrom EasyEDA

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

13
Supply, least
3 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
7 V · VIN, absolute max · p. 4
Junction, hottest
150 °C · Junction temperature, absolute max · p. 4
Takes working
3.3 mA · VIN, switching quiescent current typical, LM2831X, VFB = 0.55 V, TJ = 25°C · p. 5
Takes asleep
30 nA · VIN, shutdown quiescent current typical, VEN = 0 V · p. 5
Gives
1.5 A · Rated output current max · p. 1
Current limit
2.5 A · Switch current limit typical, VIN = 3.3 V, TJ = 25°C · p. 5
Feedback reference
600 mV · Feedback voltage typical, TJ = 25°C · p. 5
Switches at
1.6 MHz · LM2831-X switching frequency typical, TJ = 25°C · p. 5
Junction to air (SOT-23 (DBV))
163.4 K/W · Junction-to-ambient thermal resistance typical · p. 4
Junction to case (SOT-23 (DBV))
114.4 K/W · Junction-to-case (top) thermal resistance typical · p. 4
Junction to board (SOT-23 (DBV))
26.8 K/W · Junction-to-board thermal resistance typical · p. 4

What it is and has

8
Package
SOT-23 · p. 1
Output voltage range
0.6 V to 4.5 V · p. 1
Switching frequency
1.6 MHz (LM2831X) · p. 1
Internal voltage reference
0.6 V, 2% · p. 1
Soft start
Internal · p. 1
Control
Current Mode, PWM Operation · p. 1
Protection
Thermal Shutdown · p. 1
Protection
Overvoltage Protection · p. 1

Around it

10
cap 22 µF, 6.3 V
between VIN and GND; C1 in LM2831X design example 1; X5R ceramic. Place close to the IC and catch diode ground. · p. 13
cap 2x22 µF, 6.3 V
between VO and GND; C2 in LM2831X design example 1; X5R ceramic. · p. 13
diode 0.3 Vf Schottky 1.5 A, 30 VR
between GND and SW; D1 catch diode in LM2831X design example 1; Toshiba CRS08, anode at GND. · p. 13
ind 3.3 µH, 2.2 A
between SW and VO; L1 in LM2831X design example 1. · p. 13
res 15.0 kΩ, 1%
between FB and GND; R2 in LM2831X design example 1, for 1.2 V output. · p. 13
res 15.0 kΩ, 1%
between VO and FB; R1 in LM2831X design example 1, for 1.2 V output. · p. 13
res 100 kΩ, 1%
between VIN and EN; R3 enable pull-up in LM2831X design example 1. · p. 13
res 10 kΩ
between FB and GND; Suggested R2 value for setting the output voltage. · p. 15
res 0 Ω to 100 Ω
between VO and FB; R1 for unity gain operation, VO = 0.6 V. · p. 15
res equal or greater than 10 kΩ
between FB and GND; R2 for unity gain operation, VO = 0.6 V. · p. 15

Specifications

42
ParameterConditionsAs printedPage
VIN VINmin -0.5 · max 7 V4
FB Voltagemin -0.5 · max 3 V4
EN Voltagemin -0.5 · max 7 V4
SW Voltagemin -0.5 · max 7 V4
Junction Temperaturemax 150 °C4
Soldering InformationInfrared or Convection Reflow (15 sec)max 220 °C4
Storage Temperature, Tstg Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001min -2000 · max 2000 V4
VIN VINmin 3 · max 5.5 V4
Junction Temperaturemin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJASOT-23 (DBV), 5 PINS; soldered directly onto a 3” × 3” PC board with 2 oz. copper on 4 layers in still airtyp 163.4 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)SOT-23 (DBV), 5 PINS; soldered directly onto a 3” × 3” PC board with 2 oz. copper on 4 layers in still airtyp 114.4 °C/W4
Junction-to-board thermal resistance RθJBSOT-23 (DBV), 5 PINStyp 26.8 °C/W4
Junction-to-top characterization parameter ψJTSOT-23 (DBV), 5 PINStyp 12.4 °C/W4
Junction-to-board characterization parameter ψJBSOT-23 (DBV), 5 PINStyp 26.2 °C/W4
Feedback Voltage VFBVIN = 5 V; WSON and SOT-23 Package; TJ = 25°Ctyp 0.6 V5
Feedback Voltage VFBVIN = 5 V; WSON and SOT-23 Package; –40°C to 125°Cmin 0.588 · max 0.612 V5
Feedback Voltage Line Regulation ΔVFB/VINVIN = 3 V to 5 V; TJ = 25°Ctyp 0.02 %/V5
Feedback Input Bias Current IBVIN = 5 V; TJ = 25°Ctyp 0.1 nA5
Feedback Input Bias Current IBVIN = 5 V; –40°C to 125°Cmax 100 nA5
Undervoltage Lockout UVLOVIN Rising; TJ = 25°Ctyp 2.73 V5
Undervoltage Lockout UVLOVIN Rising; –40°C to 125°Cmax 2.9 V5
Undervoltage Lockout UVLOVIN Falling; TJ = 25°Ctyp 2.3 V5
Undervoltage Lockout UVLOVIN Falling; –40°C to 125°Cmin 1.85 V5
UVLO Hysteresis UVLOTJ = 25°Ctyp 0.43 V5
Switching Frequency FSWVIN = 5 V; LM2831-X; TJ = 25°Ctyp 1.6 MHz5
Switching Frequency FSWVIN = 5 V; LM2831-X; –40°C to 125°Cmin 1.2 · max 1.95 MHz5
Maximum Duty Cycle DMAXVIN = 5 V; LM2831-X; TJ = 25°Ctyp 94 %5
Maximum Duty Cycle DMAXVIN = 5 V; LM2831-X; –40°C to 125°Cmin 86 %5
Minimum Duty Cycle DMINVIN = 5 V; LM2831-X; TJ = 25°Ctyp 5 %5
Switch On Resistance RDS(ON)VIN = 5 V; SOT-23 Package; TJ = 25°Ctyp 130 mΩ5
Switch On Resistance RDS(ON)VIN = 5 V; SOT-23 Package; –40°C to 125°Cmax 195 mΩ5
Switch Current Limit ICLVIN = 3.3 V; TJ = 25°Ctyp 2.5 A5
Switch Current Limit ICLVIN = 3.3 V; –40°C to 125°Cmin 1.8 A5
Shutdown Threshold Voltage VEN_THVIN = 5 V; –40°C to 125°Cmax 0.4 V5
Enable Threshold Voltage VEN_THVIN = 5 V; –40°C to 125°Cmin 1.8 V5
Switch Leakage ISWVIN = 5 V; TJ = 25°Ctyp 100 nA5
Enable Pin Current IENVIN = 5 V; Sink/Source; TJ = 25°Ctyp 100 nA5
Quiescent Current (switching) IQVIN = 5 V; LM2831X VFB = 0.55; TJ = 25°Ctyp 3.3 mA5
Quiescent Current (switching) IQVIN = 5 V; LM2831X VFB = 0.55; –40°C to 125°Cmax 5 mA5
Quiescent Current (shutdown) IQVIN = 5 V; All Options VEN = 0 V; TJ = 25°Ctyp 30 nA5
Thermal Shutdown Temperature TSDVIN = 5 Vtyp 165 °C5

Pins, by the datasheet

5
1 SW
Output switch. Connect to the inductor and catch diode. · p. 3
2 GND
Signal and power ground pin. Place the bottom resistor of the feedback network as close as possible to this pin. · p. 3
3 FB
Feedback pin. Connect to external resistor divider to set output voltage. · p. 3
4 EN
Enable control input. Logic high enables operation. Do not allow this pin to float or exceed VIN + 0.3 V. · p. 3
5 VIN
Input supply voltage. · p. 3

Ordering codes, by the datasheet

10
LM2831XMF/NOPB
SOT-23 · X option; 5 pins, DBV drawing, package quantity 1000 · p. 31
LM2831XMFX/NOPB
SOT-23 · X option; 5 pins, DBV drawing, package quantity 3000 · p. 31
LM2831XSD
WSON · X option; 6 pins, NGG drawing, package quantity 1000; NRND · p. 31
LM2831XSD/NOPB
WSON · X option; 6 pins, NGG drawing, package quantity 1000 · p. 31
LM2831XSDX/NOPB
WSON · X option; 6 pins, NGG drawing, package quantity 4500 · p. 31
LM2831YMF/NOPB
SOT-23 · Y option; 5 pins, DBV drawing, package quantity 1000 · p. 31
LM2831YMFX/NOPB
SOT-23 · Y option; 5 pins, DBV drawing, package quantity 3000 · p. 31
LM2831YSD/NOPB
WSON · Y option; 6 pins, NGG drawing, package quantity 1000 · p. 31
LM2831ZMF/NOPB
SOT-23 · Z option; 5 pins, DBV drawing, package quantity 1000 · p. 31
LM2831ZSD/NOPB
WSON · Z option; 6 pins, NGG drawing, package quantity 1000 · p. 31

Open-source boards using it

1
  • 4 layers225 × 185.6 mmPCB schematics with overcurrent protection, the printed circuit board in 3D

    PCB schematics with overcurrent protection

    SA-04/Data-Recorder-GWRC-

    An open source and open hardware IoT-connected SDI-12-enabled remote data recorder capable of deployment for environmental monitoring by New Zealand Regional Councils.

    129 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM2831XMF?

Yes. The symbol is EasyEDA_Cloud:TPS61040DBVRG and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM2831XMF?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the LM2831XMF datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM2831XMF?

JLCPCB lists it as part C131989, with 0 in stock; the sellers' links on this page open their listings.

What can replace the LM2831XMF?

Parts like it in the library: the MT3540-F23 by XI'AN Aerosemi Tech, the TLV62569DBV by Texas Instruments, the SY8089AAAC by 矽力杰silergy and the SY8089A1AAC by 矽力杰silergy. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM2831XMF?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.