
MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.

ATmega328P-AU based MCU datalogger designed in KiCad with I²C, SPI, and UART interfaces, featuring 2-layer and 4-layer FR4 PCB designs.
MCU Datalogger is an open-source printed circuit board by ehsan-zehtabchi, from the ehsan-zehtabchi/MCU-Datalogger repository on GitHub. It is a 2-layer board of 49.6 × 32.3 mm with 31 parts on 34 nets, routed with 424 tracks and 44 vias.
It is built around the ATMEGA328P-AU, 24LC1025-I/P and DS1337S+T&R. Its parts include 7 resistors, 5 capacitors, 4 ICs, 4 connectors and 2 diodes. It belongs with the sensors and measurement and interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R6 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 24LC1025 | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U1, U3 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric | R5, R7 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 16 MHz | Crystal:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm_HandSoldering | Y2 |
| 1 | 32.768 KHz | Crystal:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | ATMEGA328P-AU | MCU Datalogger Footprints:ATMEGA328P-AU | U4 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Conn_01x09_Pin | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J2 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | DS1337S_ | MCU Datalogger Footprints:SOIC127P600X175-8N | U2 |
| 1 | ESAN_ZI_HOLLOW_BOLD_7mm_FSilk | ESAN_ZI_logo_3:ESAN_ZI_3_logo_7mm_FSilk | REFG2 |
| 1 | KiCad-Logo2_5mm_SilkScreen | Symbol:KiCad-Logo2_5mm_SilkScreen | REF2 |

futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.

futureshocked/KicadLikeAPro-Project-3-BACEE
This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.

DevMajed/DataLogger-Board
Hardware PCB Design for AVR-based Datalogger using KiCAD



GildardoRestrepo/course_electronics_design
Repositorio de actividades entregables del curso de diseño electrónico. UPB 2026-02

lologog/MCU_DataLogger
A microcontroller-based device for logging and storing data from external sensors. The data is saved to EEPROM memory for later retrieval and analysis

It measures 49.6 × 32.3 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the ATMEGA328P-AU, 24LC1025-I/P and DS1337S+T&R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ehsan-zehtabchi/MCU-Datalogger repository on GitHub, at the commit this page was made from: the board is MCU Datalogger.kicad_pcb and its schematic Connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ehsan-zehtabchi before reusing the design.