
Left main routed
efyang/dovetail-kb
Uses a modified version of ergogen that supports placing arbitrary library parts.

Uses a modified version of ergogen that supports placing arbitrary library parts.
Mainpcb is an open-source printed circuit board by efyang, from the efyang/dovetail-kb repository on GitHub. It is a 2-layer board of 219.3 × 138.9 mm with 128 parts on 65 nets.
It is built around the WS2812B. Its parts include 38 switches, 36 diodes, 15 connectors, 2 resistors and 2 ICs.
Uses a modified version of ergogen that supports placing arbitrary library parts.


To update using ergogen:
node ergogen/src/cli.js ergogen.yaml -o .| Qty | Part | Info | Link(s) | |
|---|---|---|---|---|
| 2 | KB2040 | QMK compatible pro-micro footprint. Currently must have QMK for trackpad, recommmended RP2040 | https://www.adafruit.com/product/5302 | |
| 2 | PJ-320A Jack | https://www.aliexpress.com/item/2251832181971069.html | ||
| 36 | Kailh Choc Hotswap Sockets | https://www.aliexpress.com/item/3256803389452947.html | ||
| 3 | M2 Standoffs | Trying M2x7 | https://www.aliexpress.com/item/2251832782516182.html | |
| idk can't count | M2 Screws | |||
| 1 | FPC Cable | 0.5mm pitch, 12pin, same side (but probably should cut and strip yourself anyways) | https://www.aliexpress.com/item/3256801417741263.html | |
| 1 | FPC Connector | 12P, 0.5mm pitch | https://www.aliexpress.com/item/2261800162045502.html | |
| 4 | MCU Sockets (optional) | I like these ones - PH3.5, use them with regular headers | https://www.aliexpress.com/item/2251832713321083.html | |
| 2 | Scroll Wheel | https://www.aliexpress.com/item/2251832804635444.html | ||
| 14 | WS2812b 5050 | https://www.aliexpress.com/item/3256802466699315.html | ||
| 1 | TM035035-2024-003 Trackpad | Cirque Glide Trackpad with overlay | https://www.mouser.com/ProductDetail/355-TM0350352024-003 | |
| 2 | EVQ-P7C01P Reset Switch | I wanted to be fancy lol | https://www.mouser.com/ProductDetail/667-EVQP7C01P | |
| 1 | Trackpad holder part | Probably want 2 just in case | In repo | |
| 1 | 1 of each PCB minimum | left-main, right-main, left-thumb, right-thumb (you could actually interchange the thumbs) | In repo | |
| 2 | Plates | Untested | In repo | |
| 12 | M2 standoffs (5mm) | Untested | https://www.aliexpress.com/item/2251832782591461.html | |
| 2 | 1/4in lock nut | Untested | https://www.aliexpress.com/item/3256802483856268.html | |
| 2 | Camera swivel thingy | Untested | https://www.aliexpress.com/item/3256803400603212.html | |
| 2 | Magnetic Base | Untested | https://www.aliexpress.com/item/3256803496352836.html | |
| 2 | Palm LED Diffuser | Untested | In repo | |
| 2 | Palm LED Diffuser Spacer | Untested | In repo | |
| 36 | Diodes | |||
| 1 | Case (optional) | https://www.aliexpress.com/item/3256803532895347.html |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | Diode | Library:D3_TH_SMD_v2 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 |
| 36 | Val** | Library:PG1350 | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +20 |
| 19 | M2 | kbd:M2_HOLE_v3 | H1, H2, H3, H4, H5, H6, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19 +3 |
| 14 | WS2812b | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | DS1, DS2, DS3, DS4, DS5, DS6, DS7, DS8, DS9, DS10, DS11, DS12, DS13, DS14 |
| 6 | SDA | kbd:Jumper | J5, J6, J7, J8, J9, J10 |
| 2 | 4K7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | Female 9pin | Library:kb_90deg_connector_female_9pin | J12, J13 |
| 2 | I2C Breakout | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J4 |
| 2 | Male 9pin | Library:kb_90deg_connector_male_9pin | J14, J15 |
| 2 | Pro Micro Footprint | Library:ProMicro | U1, U2 |
| 2 | RST | Library:SW_SPST_EVQP7C | RST1, RST2 |
| 2 | Scroll Wheel | Library:EVQWGD001 | S1, S2 |
| 2 | TRRS | Library:TRRS-PJ-320A | J1, J2 |
| 1 | 12pin FPC | Library:Hirose_FH12-12S-0.5SH_1x12-1MP_P0.50mm_Horizontal | J11 |

efyang/dovetail-kb
Uses a modified version of ergogen that supports placing arbitrary library parts.

efyang/dovetail-kb
Uses a modified version of ergogen that supports placing arbitrary library parts.
efyang/dovetail-kb
Uses a modified version of ergogen that supports placing arbitrary library parts.
efyang/dovetail-kb
Uses a modified version of ergogen that supports placing arbitrary library parts.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 219.3 × 138.9 mm and has 2 copper layers, 1.6 mm thick.
128 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the efyang/dovetail-kb repository on GitHub, at the commit this page was made from: the board is pcbs/mainpcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask efyang before reusing the design.